Checkout using your account
This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.
Checkout as a new customer
Creating an account has many benefits:
(9)
Revolving
999
Single
Free Shipping (USA)
Free Tech Support
Free 2-Year Warranty
Free shipping to the lower 48 states for online orders of $99 and up.
Our friendly and knowledgeable sales team is here to support you before, during and after your purchase.
We add an extra year to the manufacturer's warranty, giving you a full 2-years coverage - for free!
With abundant power and unrivaled build quality, the Rupert Neve Designs R10 delivers peace of mind for engineers who demand a higher degree of confidence in their 500 series racks.
Power-wise, the R10 has more than 150% the required current for a 10-space chassis to prevent the power rails from failing under a higher-than-expected load. To help monitor and troubleshoot problematic modules, the R10 is equipped with LED current metering to show how much power is being used. The internal power supply itself has been carefully designed and double-shielded to avoid significant magnetic induction in any of the channel positions. With such attention to providing and monitoring power, the R10 helps your modules realize their fullest potential.
To ensure many years of use, the chassis is made of solid steel with sliding nuts to accommodate various manufacturers’ 500 Series modules. And of course, all connectors and fittings are of the very highest quality.
Because the R10 is built to official 500 Series specifications (surprisingly, not all racks are!) it will work flawlessly with any properly-designed 500 series module you wish to include in it. To help accommodate modules that are slightly out of spec, the R10 has variable-position screw holes to help make the installation process as smooth as possible.
The 500 series VCA buss link function can also be enabled in pairs on the R10 using the link jumpers on Channels 1-2, 3-4, 5-6, 7-8 or 9-10. Enabling link allows compatible compressor modules like the 535 or 543 to share VCA control when their links are enabled. Matching blank panels are also available to cover any empty slots.
Its a solid rack that does the job well. In my experience with rack based gear, the desire to fill it is insatiable. Whether you want to have a lot of processing units or something to grow into, I have no doubt that this rack will fit the bill. I'm new to 500 series so perhaps a seasoned expert may have more refined needs like ADAT and such but in my opinion this has everything it needs for a great sound and to integrate into my existing workflow. I have noticed some very quiet hum but its only evident when there is silence.
Very good excelente
Works great has plenty of power
The R10 rack is no-frills and all power. I never have to guess if modules will draw too much current because the R10 can supply it.
Top tier!
Works very well, enough clean power for all my modules. Love the internal power supply and TRS-XLR connectors on the back, and internal jumper linking. It’s a little pricy for a chassis, but if you buy this you’ll never need another one again (unless you of course need more than 10 slots). The front floating nuts for connections leaves a little bit of a gap between some modules, but this is nice because it allows you to fit some non standard sized modules.
I upgraded to an RND R10 after using a Fredenstein lunchbox. I wasn't sure if it was going to be worth the money, because the Fredenstein was rated for more than enough power, and I wasn't getting audible noise in my modules. However, after upgrading to the R10 my modules performed significantly better--especially my Hairball Copper preamps, which have new life, snap, and character I couldn't hear before. I performed sine tests and got back quieter harmonics, even lower noise floor, and improved headroom in my mixbus chain. My tracks just sound better now, with no added effort. Thank you and rest in peace, Rupert. Your contributions to our field are innumerable.
The best I’ve found after trying Trident & API. The build is ridiculously hearty, using 1/8” steel for the chassis. Power meter gives me feedback to let me know my modules are well fed. On/Off button on the front is a feature I hated to live without, but not here. Neve is the bidness.
It works.
* Required Fields
The best gear advice always comes from those who use it the most. That's where you come in! Let the pro audio world hear your voice with a review of the Rupert Neve Designs R10 10-Slot 500 Series Rack . Once you submit your review, please check your email and verify your address to have it posted.
exclamation-circle