Experts At Your Service
Have a question? Our Audio Consultants and Technicians have years of real-world experience and are ready to help.
Product Description
- Original Design Circa 1969
- The Fastest Analog Compressor/Limiter - 100 Nanoseconds to 20 Microseconds
- Ultra Low Noise: Not Less Than 80dB Below +4dBu Output With -40dBu Input (Threshold), 20Hz to 20kHz, Unweighted
- Input/Output - Transformer Isolation
- Frequency Response +/- 1dB, 20Hz to 20kHz, @ +16dBu
- Input Impedance: 600 ohms
- Output Impedance - Approximately 120 ohms (1 kHz), Floating
- Output Loading - 600 ohms to Infinity, balanced or unbalanced
- Maximum Gain: 56 dB
- Input Level: Typically -50 dBu to +10 dBu
- Threshold Attack Level: 40 dBu
- Output level: Typically +4 dBu or +8 dBu
- Frequency Response:
- +/- 1 dB, 20 Hz to 40 kHz, at +16 dBu (High Z Load)
- +/- 5 dB, 20 Hz to 20 kHz, at +16 dBu (600 ohm load)
- Harmonic Distortion: Less than 1/10 of 1%, 30 Hz to 20kHz, at +16 dBu, up to 30 dB compression, with release time such that attack and release does not occur on successive peaks of the lowest frequency utilized (Typically less than 5/100ths of 1%)
- Compression/Limiting Ratio - Continuously Variable from approximately 11:1 to 100:1
- Attack Time (Automatically Variable):
- Limiter - 100 nanoseconds to 20 microseconds
- Compressor - 100 nanoseconds to 12 milliseconds
- Release Time For 90% Recovery:
- Limiter - Less than 90 nanoseconds
- Compressor - Continuously variable from 50 milliseconds to more than 10 seconds
- Maximum Temperature - 140 degrees Farenheit
- Power Requirement - 105 - 125 VAC, 60 Hz 6 watts
- Physical Dimensions - 3 1/2" high x 19" x 8 1/2" deep for standard rack
- Stereophonic Interconnection - Two units are coupled easily Requires Model 610 SI Accessory for Interconnection
Specifications
| Channels | |
|---|---|
| Chassis | |
| Compression Type | FET |
| Digital I/O | No |
| Direct Input | No |
| Tube or Solid State | |
| Rack format | 19-inch rackmount 2U |
Shop New October Deals