0% up to 48 Months on over 110 Brands!
New & Current Vintage King Card Holders
The linear, self-powered Meyer Sound Amie-Sub compact subwoofer offers outstanding sonic characteristics, such as clean, punchy transients and excellent phase coherence with impressive low-frequencies down to 22 Hz in a compact cabinet.
The Amie-Sub was specifically designed to be the perfect companion for Amie precision monitors—creating a complete system by extending the system frequency response down to the lower limit of the audible range with easy integration in multi‑channel configurations.
In addition, due its performance and versatility, the Amie-Sub is equally suited to complement other Meyer Sound loudspeakers, such as HMS-5, HMS-10, HMS-12, and HMS-15 in immersive surround applications or across other more general applications with UltraSeries loudspeakers.
Extensive research and measurements resulted in the creation of Amie-Sub integration modules to produce a consistent behavior across multiple configurations and environments.
The optional integration modules enable the Amie-Sub to excel at working in any multichannel configuration, creating a perfectly balanced and easy-to-set-up system with up to 7 Amie precision monitors.
The 2.1 integration module features 2 input channels using XLR connectors, while the 7.1 module features industry standard multi‑pin DB-25 and can be used in 5.1 or 7.1 configurations with third-party, high-quality, 8-channel, DB-25-to-XLR cables.
The integration modules feature bass management processing as well as a dedicated phase-matched .1 input for the LFE channel with selectable +10 dB boost to meet a variety of standards.
The Amie-Sub has an operating frequency range of 22–160 Hz and a linear peak SPL of 124.5 dB with crest factor >11.5 dB, measured in half-space at 4 m and referred to 1 m using M-noise.
The Amie-Sub includes a single 15-inch, low distortion, long‑excursion cone driver. The bass reflex cabinet employs optimized port design for high efficiency and low port distortion. Its slanted connector panel facilitates flush-mounting the cabinet against wall surfaces, reducing required installation depth to 19 inches including connectors.
The cabinet houses a Class D power amplifier and signal processing includes crossover, driver protection, and frequency and phase correction.
The Intelligent AC power supply provides automatic voltage selection, EMI filtering, soft current turn-on, and surge suppression.
Meyer Sound constructs the Amie-Sub cabinet from premium birch plywood coated with a durable slightly textured finish and includes a stamped-steel grille to protect the drivers. A grille frame with black cloth that mounts on top of the steel grille is optionally available.
The Amie-Sub comes standard with two M8 mounting points on each side for use with the optional MUB-Amie-Sub U-bracket for mounting the subwoofer from ceilings.
Condition | New |
---|---|
Width | 24 in |
Depth | 19 in |
Height | 17.5 in |
Unit Weight | 74 lb |
Active or Passive | Active |
Monitor Application | Sub |
Speaker Configuration | Single speaker |
Driver Sizes | 15" long-excursion cone driver |
Number of Speakers | Single |
Input Connectors | Analog XLR |
Amp Wattage | 1100 W Class D |
Frequency Range | 22 Hz - 160 Hz |
Max. SPL | 124.5 dB |
Please fill out the form below and a Vintage King Audio Consultant will contact you with a ship date for the Meyer Sound Amie-Sub Compact Subwoofer.
For assistance in better understanding the content of this page or any other page within this website, please call 888.653.1184 during normal business hours.
© 1993 - 2023 Vintage King Audio All Rights Reserved. Terms and Conditions | Privacy and Security | Accessibility