0% up to 48 Months on over 110 Brands!
New & Current Vintage King Card Holders
Comprehensive Atmos/immersive sound monitoring bundle including speakers, amplification, stands, and ceiling mounting solutions - recommended for spaces 400 sq ft or less
If you're ready to bring your studio into the immersive world of Dolby Atmos 7.1.4, Vintage King Audio has your monitoring needs covered! The ATC Loudspeaker 7.1.4 Immersive Studio Monitor Bundle 2 is comprehensive bundle including speakers, amplification, stands, and ceiling/wall mounting solutions. It is recommended for 400 sq ft or less spaces.
Dolby Atmos naming taxonomy is structured as follows: Standard Channels.LFE (Low Frequency Effects) Channels.Overhead Channels. So, for example, a 7.1.4 Dolby Atmos system consists of seven standard channels (left front, center, right front, left side surround [Lss], right side surround [Rss], left rear surround [Lrs] and right rear surround [Rrs]), one LFE channel, and four overhead channels. Learn more about mixing with Dolby Atmos here.
ATC LOUDSPEAKERS SCM25A PRO COMPACT MK2 ACTIVE 3-WAY MONITOR (QTY: 7 SPEAKERS TOTAL)
The ATC SCM25A PRO Mk2 has been upgraded with ATC’s hand made proprietary SH25-76S Dual Suspension Tweeter, extending the high-frequency response with a reduction in distortion. Like the original SCM25A, the upgraded Mk2 is a compact 3-way high-performance active studio monitor loudspeaker, based around the hand made proprietary ATC 3"/75mm soft mid-dome driver and 6.5"/164mm bass driver loaded in a 25-liter vented cabinet. The monitor’s combination of exceptional mid-range clarity, high-output, extended bass response and modest size make it ideal for nearfield monitoring across a wide range of critical applications.
These 3-way monitor features drive units designed and manufactured by ATC, and are only available in ATC Loudspeakers.
The SCM25A Pro Mk2 is actively driven by a 3-way class A/B amp pack mounted in the rear of the cabinet. Each drive unit has its own dedicated power amplifier. Audio input is via a rear panel mounted 3-pin female XLR and power via an IEC mains power inlet. There are user controls for input sensitivity and bass ‘boost’. Crossovers are 4th order Linkwitz-Riley and all-pass filters are included to optimize the phase response through the crossover regions, improving the tonal accuracy, imaging, on and off-axis frequency response. FET peak limiters are included to reduce amplifier ‘hard-clipping’. Power ‘on’ and limiter ‘active’ is indicated by a front panel mounted bi-color LED.
ATC SCM12I PRO COMPACT 2-WAY PASSIVE INSTALL MONITOR (QTY: 4 SPEAKERS TOTAL)
The ATC SCM12i Pro Install Monitor is a compact 2-way passive monitor designed for installation into recording, post production, broadcast and film studios. Its compact size and exceptional performance make it an ideal loudspeaker for use in surround/multi-channel recording/mixing and immersive audio applications such as Dolby Atmos, DTS:X and Auro 3D.
SUBWOOFER PROS STUDIO SUB2 12C 12" SUBWOOFER (QTY: 3 TOTAL)
The Subwoofer Pros Studio Sub2 12C is a universal sub used for bass extension of any studio monitor. It is sealed and self-powered, offering bass extension to 16 Hz. It has a compact cabinet using a 12” high excursion sub driver with an easy to use control set. It has built-in Left/Right XLR summing inputs and a low pass filter at 4 different frequencies of 95 Hz, 80 Hz, 60 Hz, and 40 Hz. The different low pass frequencies make it adaptable to various size “main” speakers.
LINEA RESEARCH LR-44C06 1500-WATT 4-CHANNEL DSP AMPLIFIER (QTY: 1)
Linea’s 44C Series of four channel amplifiers are optimized for use in installations. Combining massive power and peerless audio performance with unique DSP, the 44C Series also incorporates many features that ease its integration on to both new and legacy systems, the 44C Series represents an unmatched advancement in amplifier technology. The Linea Research LR-44C06 features the following RMS per channel, all 8 channels driven: 1500 W @2 Ohms; 1500 W @4 Ohms; 1500 W @ 8 Ohms; 1500 W @70/100 V.
SOUND ANCHORS ADJ1 ADJUSTABLE 44" MONITOR STAND (QTY: 6 TOTAL)
Sound Anchor ADJ1 Stands make proper speaker placement possible. When monitors are positioned properly on rigid stable platforms they work better period. The entire sound field will have more clarity, tones will be more accurate, dynamic contrasts will be greater and subtle anomalies in the mix will become more apparent. The common solutions to placement (shelves and wall mounts) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound.
SOUND ANCHORS ADJ2 ADJUSTABLE 44" MONITOR STAND (QTY: 1 TOTAL)
The Sound Anchor ADJ2 Stands are designed to make proper speaker placement possible. When monitors are positioned properly on rigid stable platforms they work better and the sound is enhanced. The entire sound field has more clarity, tones are more accurate, dynamic contrasts are greater and subtle anomalies in the mix are more apparent. The ADJ1 is great for most speakers but for any application where the speaker is too large for the ADJ1 stand but is not quite large enough to require the Sound Anchor ADMID stand, the ADJ2 is the best stand. The ADJ2 is ideally suited to the new breed of mid sized super monitors that have recently become popular in studios.
Please note: above link displays pair, this configuration includes one stand total.
K&M 24352 SPEAKER WALL MOUNT ADAPTER PLATE (QTY: 4)
The K&M 24352 Speaker Wall Mount Adapter Plate is a large, vertical universal mounting bracket with the following mounting templates:
K&M 24496 SPEAKER CEILING MOUNT (QTY: 4)
The K&M 24496 Speaker Ceiling Mount is a robust and useful loudspeaker ceiling mount with 9.8 in distance and internal cable management. The swivel area is ±45°. Within the parameters - the settings range from 0 to 45°. The clamping bracket is for loudspeakers with a vertical mounting template from 2.7 to 3 in.
Condition | New |
---|---|
Monitor Application | Immersive |
Number of Speakers | 7.1.4 (7 + 1 Sub Channel + 4 Overheads) |
Please fill out the form below and a Vintage King Audio Consultant will contact you with a ship date for the ATC Loudspeakers 7.1.4 Immersive Studio Monitor Bundle 2.
For assistance in better understanding the content of this page or any other page within this website, please call 888.653.1184 during normal business hours.
© 1993 - 2023 Vintage King Audio All Rights Reserved. Terms and Conditions | Privacy and Security | Accessibility