0% up to 48 Months on over 110 Brands!
New & Current Vintage King Card Holders
The Meyer Sound 1100-LFC Large LF Array Loudspeaker is a self-powered loudspeaker defined by its sonic linearity in reproducing low-frequency transients at high continuous output levels with very low distortion. This ultra-low distortion, coupled with exceptional headroom and optimized rigging options, makes the 1100‐LFC a flexible tool for low-end directional applications for large-scale tours and installations.
To guarantee optimum performance, design 1100‐LFC systems with Meyer Sound’s MAPPTM system design tool. This intuitive, cross-platform application accurately predicts directional patterns, frequency and impulse responses, and linear peak SPL for 1100‐LFC systems, ensuring that systems deliver the required coverage and SPL.
An optimally tuned, vented cabinet houses the 1100‐LFC’s two 18-inch, long-excursion cone drivers. The loudspeaker’s 28 Hz to 100 Hz operating frequency range complements LEO, LEOPARD, LYON, JM‐1P, and other Meyer Sound loudspeakers, allowing it to integrate seamlessly with line arrays and curvilinear arrays.
The unit’s power amplifier operates at voltages from 208 to 235 V AC, at 50/60 Hz. TruPower limiting ensures maximum driver protection, minimizing power compression while yielding high constant output under high continuous and peak power conditions. A single, field-replaceable module located on the rear of the cabinet contains the amplifier, control electronics, and power supply.
The 1100-LFC cabinet includes protective plastic skids on the bottom that securely align with the cabinet’s top slots. Units are stackable normally or reversed for cardioid configurations. Meyer Sound tunes and vents the cabinet to specifically optimize it for low air velocities.
Suspend line arrays comprising up to 16 cabinets at a 5:1 safety factor and BGC V1 from the optional MTG‐1100 top grid. For touring and portable systems, the optional MCF‐1100 caster frame accommodates three-cabinet stacking of the 1100-LFC for secure travel. Optionally available durable nylon covers, accommodating stacks of two or three 1100-LFCs, ensure complete road-readiness.
Meyer Sound’s RMS remote monitoring system comes standard with all 1100‐LFCs and provides comprehensive monitoring of system parameters from a host computer running Compass control software via the RMS interface. Convenient 5-pin XLR connectors allow the use of composite cables carrying both balanced audio and RMS signals (3-pin XLR audio connectors are optionally available).
Meyer Sound constructs the 1100‐LFC cabinet with premium multi‐ply birch and coats it with a slightly textured black finish. A powder-coated, hex‐stamped steel grille with acoustical black mesh protects the unit’s drivers.
Condition | New |
---|---|
Package Contents | Meyer Sound 1100-LFC Large LF Array Loudspeaker |
Width | 52.6 in |
Depth | 33 in |
Height | 20.48 in |
Unit Weight | 249 lb |
Active or Passive | Active |
Input Connectors | Analog XLR |
Output Connectors | Analog XLR |
Amp Wattage | 8100 W peak |
Please fill out the form below and a Vintage King Audio Consultant will contact you with a ship date for the Meyer Sound 1100-LFC Large LF Array Loudspeaker.
For assistance in better understanding the content of this page or any other page within this website, please call 888.653.1184 during normal business hours.
© 1993 - 2023 Vintage King Audio All Rights Reserved. Terms and Conditions | Privacy and Security | Accessibility