Our sales line is open Saturdays 12pm-7pm Eastern. Give us a call at 888.653.1184.

WMDevices Pro Output

A simple and purpose built module to get your modular signal interfaced with professional and consumer audio gear including a headphone driver
MFR# Pro Output
WMDevices Pro Output
$199.00
No interest if paid in full within 12 months Learn more
Special Order
Due to the special nature of this item, we order each unit fresh from the factory, exclusively for you! Lead times may vary so please chat, call or email for up-to-date inventory status.
Description

The WMDevices Pro Output is a simple and purpose built module to get your modular signal interfaced with professional and consumer audio gear. It also includes a very high quality headphone driver.

Rail to rail opamps at the input stage allow for headroom above the typical Eurorack levels of 20 Vpp. The Pro Output can handle 23 Vpp before clipping. Signals are attenuated down to the proper levels allowing for simple adjustment free connection to any type of device, professional or consumer.

The Pro Output is DC coupled through the entire signal path, including the headphone driver. This design eliminates coupling capacitors and the distortion they can cause.

Controls and I/O

Input - The inputs are designed to accept any normal modular level. 10 Vpp is the nominal operation level. The left input is normaled to the right side for mono operation. Inputs will clip at 23 Vpp, giving enough headroom for any Eurorack signal.

Phones/Line

The headphone driver connects to a 3.5 mm stereo jack, and a 1/4" jack for whatever type of headphones you use. It can drive both simultaneously.

The headphone output level is internally limited to protect against accidental knob turns. Connect a couple of jumpers to the rear of the module to disable this limiting. This will allow the headphone amp to drive headphones extremely loudly, but still without distortion. Output quality remains the same regardless of the jumper settings.

With the limiting enabled (jumpers off), the maximum output is around -10dBV. With limiting disabled (jumpers on), the maximum output increases to pro level, about +4dBu.

Stereo

The Stereo (-10 dBV) output is designed to interface directly with consumer level gear. Hook directly to sound cards, portable recorders, and speakers. It can be used as a second headphone output but will be loud.

+4dBu Bal

These two outputs (left and right) are high quality low impedance balanced line drivers. They are designed to drive long cables and to drive balanced transformer or transformerless inputs. Use these to connect directly to mixing consoles, mic preamps, or any other piece of professional outboard gear.

Features:

  • High Headroom
  • Low Distortion/Low Noise
  • DC Coupled Signal Path
  • -10dBV Stereo Mini-jack Output
  • +4dBu Balanced Outputs
  • High Quality Headphone Amplifier
  • Loudness Limiting (Can be Disabled)
  • 3.5mm and 1/4" Headphone Outputs
  • Completely Transparent Signal Path
  • 6 HP, +60mA/-60mA
Specs

Additional Information

Condition New
Maximum Depth 39 mm
Chassis module
Module Slot Count 6hp
Connector Type 3.5mm
Power Consumption +60 mA/-60 mA
Reviews

Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register.

Docs
Testimonials
Blog Posts

Have some questions about this item?

When it comes to getting the best gear, your tastes are probably pretty particular. Vintage King can help answer any and every question to help you make the right decisions for your sound. Fill out the form below and we'll be in contact with you shortly.

Free Shipping in the USA and 50% Off International Shipping! See terms.

* Required Fields