TASCAM TM-Drums - Set of 4 Mics

As the driving force behind modern music, drums and percussion have developed as powerful, complex instruments. And harnessing this power requires a very specific toolset. The Tascam TM-DRUMS microphone kit from TASCAM has been created to provide the recording or live sound engineer with everything required to capture a truly inspiring soundscape.

Included the TM-DRUMS kit are: one (1) TM-50DB Dynamic Kick Drum mic with integrated stand mount, one (1) TM-50DS Dynamic Snare mic with integrated stand mount and two (2) TM-50C Overhead Condenser mics with included mic clips and windscreens. A hard carry case is also included.

TM-50DB

• Model: Dynamic
• Directivity: Cardioid (unidirectional）
• Frequency response: 50 Hz - 15 kHz
• Output impedance: 400 Ω ±30% (at 1 kHz)
• Load impedance: <1 kΩ
• Sensitivity: -55 dB ±3dB (0 dB = 1V/Pa at 1 kHz)
• Connector: 3 pin XLR, Male
• External dimensions: 2.32 x 4.65 x 4.53 inch
• Weight: 460g (Microphone body only)
• Included Accessories: 5/8 inch -3/8 inch conversion adapter

TM-50DS:

• Model: Dynamic
• Directivity: Cardioid (unidirectional）
• Frequency response: 50 Hz - 14 kHz
• Output impedance: 350 Ω ±30% (at 1 kHz)
• Load impedance: <1 kΩ
• Sensitivity: -56dB ±3dB (0 dB = 1V/Pa at 1 kHz)
• Connector: 3 pin XLR, Male
• External dimensions: 1.67 x 4.13 x 3.86 inch
• Weight: 330 g (microphone body only)
• Accessories: 5/8 inch - 3/8 inch conversion adapter

TM-50C:

• Model: Condenser (16 mm diaphragm)
• Directivity: Cardioid (unidirectional)
• Frequency characteristics: 30 Hz - 18 kHz
• Output impedance: 100 Ω ±30% (at 1 kHz)
• Load impedance: <1 kΩ
• Sensitivity: -38 dB ±3 dB (0 dB = 1 V/Pa at 1 kHz)
• Maximum SPL: 130 dB
• Signal-noise ratio: 74 dB
• Connector: 3 pin XLR, Male
• External dimensions: 0.83 x 4.61 x 0.83 inch
• Weight: 85 g (microphone body only)
• Included Accessories: Microphone holder, 5/8 inch -3/8 inch conversion adapter