
SKU
Product Description
SPL is uber-happy to introduce the successor of their legendary Phonitor headphone preamp. They have kept all proven features, while incorporating some major improvements. The SPL Phonitor 2 can be used as the ultimate monitor controller and preamp for three different sources. SPL has also revisited the 120-Volt technology to make sure the Phonitor 2 is able to perform at the highest possible levels. This resulted in their measurement gear being in a class of its own.
Features:
- Preamplifier/Monitor Controller functionality
- Suited for all headphones and impedances
- Volume remotely controllable
- The Reference ─ the Phonitor2 sets new technical and sound standards.
- Dual-channel 120 Volt amp for headphones and active loudspeakers or power amps
- For dynamic and balanced headphones
- Optimallyy suited for low-impedance headphones starting from 10 Ohm (40 Ohm for balanced headphones)
- Remote volume control with motor potentiometer
- High-resolution laterality correction compensates right/left hearing differences
- Switchable level adjustment (consumer to professional level, 1:1, +6dB, +12 dB)
- Stereo preamplification and headphone amplification for three sources
- High-quality music playback at home
- Central monitoring unit with phase reverse L/R , solo L/R, mono switch functions
- Laterality control to compensate hearing imbalances
- Headphone amplifier for all headphone systems and impedances (from 10Ω)
- Loudspeaker simulation with headphones
- Monitoring alternative in studios and mobile units
- Adjustment of headphone playback to match familiar monitor speakers
- Mobile reproduction of usual monitoring conditions
Specifications:
- Inputs: XLR connectors, electronically balanced
- Impedance: bal. ca. 20 kΩ, unbal. ca. 10 kΩ
- Max. Input Level: +32,5 dBu
- Outputs: Monitor/Line Outputs: XLR connectors, electronically balanced
- Frequency Range: 4 Hz to 480 kHz ( -3 dB)
- CMR: -82 dBu (at 1 kHz, 0dBu input level and unity gain)
- Crosstalk at 1 kHz: -106 dB
- THD&N at 1 kHz: 0,00085 % (at 0dBu input level and unity gain)
- Noise: Unweighted -101,87 dB; A-weighted -104,76 dB; CCIR: -96,1 dB
- Dynamic Range: 134,37 dB
- Headphone Output:
- 6.3-mm TRS connector
- Pin wiring: Tip = Left, Ring = Right, Sleeve = GND
- Impedance: 0,18 Ω
- Attenuation Factor: 180 @ 40Ohm
- Frequency Range: 4 Hz to 480 kHz ( -3 dB)
- CMR: -106 dBu (at 1 kHz, 0dBu input level and unity gain)
- Crosstalk at 1 kHz: -106 dB
- THD&N at 1 kHz: 0,00091 % (at 0dBu input level and unity gain)
- Noise: Unweighted -101,12 dBu; A-weighted - 103,98 dBu; CCIR -95,02 dBu
- Dynamic Range: 133,62 dB
- Max. Output Power:
- 65m W (+20 dBm) at 1 kHz and 600 Ω connected impedance
- 560 mW (+20 dBm) at 1 kHz and 40 Ω connected impedance
- Voltages: 230 V AC, 50 Hz / 120 V AC, 60 Hz
- Power Consumption: max 23,7 VA
- Fuses: 100-120 V AC: T 1 A / 200-240 V AC: T 630 mA
- Height x Width x Depth: 99 x 277 x 305 mm / 3.9 x 10.9 x 12 in
- Weight: 4.3 kg / 9.5 lbs
- 0 dBu = 0.775 V
Product Specifications
Condition | New |
---|
Please fill out the form below and a Vintage King Audio Consultant will contact you with a ship date for the SPL Phonitor 2 - Silver.