SPL Creon USB Interface - White

The SPL Creon is designed to operate with your Digital Audio Workstation. But you can also do a lot with it as a stand-alone device: plug in an instrument and play. Connect a microphone and sing along.

Mix your own monitor signal with playback or guide tracks from any source. What you are playing is not bad? Turn on the DAW and record it.

Features

• 2 discrete SPL microphone preamplifiers
• Instrument preamplifier (Hi-Z, +22 dBu)
• 2 Line inputs
• 2 Channel USB-Interface with 24Bit/192kHz converter
• USB Class 2.0 compliant for iOS device recording/monitoring
• Powerful headphone amplifier
• Stereo speaker output
• Play-along and monitoring also without DAW (stand-alone)
• Real-time analog monitoring
• One knob monitor mix
• 34V operational voltage for professional levels up to +22.8dB
• Pro level boost for consumer electronics
• Very low jitter due to FMCTM (Fixed-Master-Clock)
• No sample rate conversion or clock recovery for true 1:1 audio
• Hi-Speed USB 2.0 (480MBit/s)
• Windows XP/7/8/10, Mac OS X 10.6 or higher, iOS 6 and higher
• HxWxD: 67x330x212 mm, 2.64x13x8.34 inch
• Made in Germany

Specifications

Recording Channels

• 2 microphone inputs (XLR)
• 1 instrument input (TS)
• 2 balanced line inputs (TRS)
• Two channels can be recorded simultaneously.

Playback Channels: 2 channels via USB (DAW 1|2)

Analog Inputs (Sources)

• 2 TRS line input channels (balanced)
• 2 RCA line input channels (unbalanced)

Digital Input: 1 USB

Analog Output

• Speaker | Main Out (2x XLR, balanced)
• 1 headphone socket (TRS)

Digital Output: 1 USB

Hardware

• USB 2 audio system
• High-performance, 32 bit microcontroller
• 24 bit audio processing
• 2 input and 2 output channels, up to 192 kHz
• Sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz
• Fixed master clock for lowest jitter
• True 1:1 audio, no sample rate conversion or clock recovery

Software

• Windows XP/7/8/10, Mac OS X 10.6 or higher, iOS 6 and higher
• No driver required for Mac
• USB Audio Class 2.0 compliance (asynchronous mode)
• Low-latency Windows ASIO and WDM driver
• Multi-application mode, simultaneous ASIO and/or WDM playback
• Driver feedback synchronization to hardware clock
• ASIO control panel for Windows

Input Sockets

• Mic Inputs 1, 2: XLR
• Line Inputs 1, 2: 6.3mm TRS
• Instrument Input: 6.3mm TS
• Source 1 Input: 6.3mm TRS
• Source 2 Input: RCA

Output Sockets

• Speaker Out | Main Out: XLR
• Headphone Output: 6.3mm TRS

Input Impedances

• Microphone Input: 10kOhm
• Line Inputs: 10kOhm unbalanced, 20kOhm balanced
• Instrument Input: 1.1MOhm
• Source 1 Input: 10kOhm unbalanced, 20kOhm balanced
• Source 2 Input: 10kOhm

Output Impedances

• Speaker Out | Main Out: 75Ohm unbalanced, 150Ohm balanced
• Headphone Output: 33Ohm

Maximum Input Levels

• Mic Inputs: +14.5dBu (Gain fully left)
• Line Inputs: +22.5dBu
• Instrument Input: +22dBu (Gain fully left)
• Source 1 Input: +22.5dBu
• Source 2 Input: +22.5dBu

Maximum Output Levels: Speaker Out | Main Out: +22.5dBu

Microphone Preamplifiers (balanced, XLR)

• Gain Control: +7dB - +60dB
• Frequency Response: 10Hz - >200kHz
• Noise (unweighted, 30dB gain, input termination 150Ohm): -90dBu
• Equivalent Input Noise: -128dBu
• Common Mode Rejection Ratio: < -70dBu
• THD+N Ratio@1kHz (30dB gain, input termination 150Ohm): 0.003%
• High Pass Filter: fg = 80Hz, 6dB/Oct.
• Phantom Power: 48Volt

Instrument Input (Unbalanced, 6.3mm TS)

• Gain Control: -6dB - +31dB
• Frequency Response: 10Hz - >200kHz
• Noise (unweighted, unity gain, input termination 100kOhm): -85dBu
• THD+N Ratio@1kHz (unity gain, input termination 100kOhm): 0.005%

Line Input (balanced, 6.3mm TRS)

• Frequency Response: 10Hz - >200kHz
• Noise (unweighted, unity gain, input termination 600Ohm): -95dBu
• Common Mode Rejection ratio: < -60dBu
• THD+N Ratio@1kHz (unity gain, input termination 600Ohm): 0.002%

Source 1 Input (balanced, 6.3mm TRS)

• Frequency Response: 10Hz - >200kHz
• Noise (unweighted, unity gain, input termination 600Ohm): -95dBu
• Common Mode Rejection ratio: < -60dBu
• THD+N Ratio@1kHz (unity gain, input termination 600Ohm): 0.002%

Source 2 Input (unbalanced, RCA)

• Frequency Response: 10Hz - >200kHz
• Noise (unweighted, unity gain, input termination 600Ohm): -90dBu
• Noise (unweighted, -10dBV, input termination 600Ohm): -85dBu
• THD+N Ratio@1kHz (unity gain, input termination 600Ohm): 0.003%
• THD+N Ratio@1kHz (-10dBV, input termination 600Ohm): 0.003%

Headphone Outputs (stereo, 6.3mm TRS)

• Frequency Response: 10Hz - >200kHz
• Power@0dBu: 47Ohm load: 13mW/300Ohm load: 1,7mW/600Ohm load: 1.0mW
• Power max: 47Ohm load: 670mW/300Ohm load: 265mW/600Ohm load: 150mW
• THD+N Ratio@1kHz (Power@0dBu): 47Ohm: 0.0026%/300Ohm: 0.002%/600Ohm: 0.002%

AD Conversion

Dynamic range

• 44.1/48kHz: 128dB
• 88.2/96kHz: 123dB
• THD+N ratio @ 1kHz (-1dBFS):44.1/48kHz: 0.002%; 88.2/96kHz: 0.00; 0dBFS = +15dBu

DA Conversion

Dynamic range

• 44.1/48kHz: 124dB
• 88.2/96kHz: 122dB
• THD+N ratio @ 1kHz (-1dBFS): 44.1/48kHz: 0.003%; 88.2/96kHz: 0.004%

Power Supply

• External Power Supply, Input 100–240V AC/50–60 Hz; Output 12V DC/1,5A
• Internal Power Supplies: Audio: +/-17V, Digital: +5V and +3,3V
• Power Consumption: 16.8 Watt

Dimensions and Weight

• H x W x D in mm: 67x330x212, 2.64x13x8.34 inch
• Weight: 2,7 kg, 5.95lbs