0% up to 48 Months on over 110 Brands!
New & Current Vintage King Card Holders
The Sound Anchors ADJ2 Adjustable 56” Monitor Stand is designed to make proper speaker placement possible. When monitors are positioned properly on rigid stable platforms they work better and the sound is enhanced. The entire sound field has more clarity, tones are more accurate, dynamic contrasts are greater and subtle anomalies in the mix are more apparent. The ADJ2 is ideally suited to the new breed of midsized super monitors that have recently become popular in studios.
The ADJ2 stand features the same look as the ADJ1, the main difference between them is the dimensions of the base. The base of the ADJ2 stand is 17" X 23". This stand works best for speakers that have a width no wider than 24 inches and a depth no greater than 18 inches. Smaller speakers will also work on the ADJ2s. The common solutions for speaker support (shelves, flimsy wall mounts and meter bridges) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks, they seldom position your monitors exactly where they need to be for the best sound. Sound Anchor stands address and eliminate these three drawbacks.
Sound Anchors ADJ2 stands allow engineers to correctly place a pair of monitors behind the console. These stands allow height and tilt adjustment of the monitors. The 17" x 23" base and the upright are filled and damped from the factory. ADJ2 stands offer solid, stable and non-resonant support for your speakers. The speaker platform is made of 1/4" aluminum which reduces the amount of energy that gets transferred into the stand. Sound Anchor ADJ2 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.
Sound Anchor ADJ2 Adjustable Speaker Stands are handcrafted in the USA. They are made of large section square steel tubing and aluminum plate with structural grade welded construction for rigid stability. They are spiked at the floor to anchor your monitors in space. Special sorbothane pads are provided for use between the speaker and the stand. Sound Anchors ADJ2 stands are pre-filled using our proprietary materials and methods to eliminate resonance and add mass. These features give Sound Anchors the highest level of professional performance and Sound Anchor Adjustable Stands are found in many of the world's leading studios. Sound Anchor ADJ2 Monitor Stands are cost-effective tools for your high-performance recording studio.
Condition | New |
---|---|
Package Contents | Sound Anchors ADJ2 Adjustable 56” Monitor Stand - Single |
Width | 17 in |
Height | 58 in |
Depth | 23 in |
Unit Weight | 50 lb |
Please fill out the form below and a Vintage King Audio Consultant will contact you with a ship date for the Sound Anchors ADJ2 Adjustable 56” Monitor Stand - Single.
For assistance in better understanding the content of this page or any other page within this website, please call 888.653.1184 during normal business hours.
© 1993 - 2023 Vintage King Audio All Rights Reserved. Terms and Conditions | Privacy and Security | Accessibility