Sonarworks SoundID Reference for Speakers & Headphones - Electronic Delivery

Sonarworks SoundID Reference for Speakers & Headphones is speaker and headphone calibration software delivering consistently accurate studio reference sound. In less than 20 minutes you can calibrate your existing studio speakers with a measurement microphone (buy from us or use yours) and calibrate your existing headphones with more than 480 headphone calibration profiles already included in the software as ready-to-use presets. With an applied calibration profile the software sets the frequency response target to be completely flat across all audible frequencies so you can trust that every mix will translate. You can also now make custom adjustments to the target curve in real-time with the new custom target feature.

With accurate studio reference sound, you can seamlessly switch between speakers, headphones, and rooms. Finally, mix with confidence and make music that sounds great everywhere.

FEATURES:

• Ready-to-use headphone calibration for 480+ models
• Accurate speaker measurements and calibration for stereo systems
• 3 filter modes: Zero Latency, Mixed and Linear Phase
• Additional DSP processing controls: Mono, Dry/Wet, and Safe Headroom
• MIDI mapping in the SoundID Reference app for various controls
• User Presets in the SoundID Reference app for switching quickly between predefined output device/channel pair combinations
• Flat target curve used by over 140k music creators globally
• Custom Target: target curve adjustments in real time
• Translation Check: simulate 20+ different devices and environments
• Zero latency plug-in DSP
• Near-zero latency system-wide calibration on Windows
• Native support for Apple Silicon (M-series chip devices)
• Merging Technologies MERGING+ANUBIS (headphone and stereo speaker profile export)
• Wayne Jones AUDIO Studio Monitors (stereo speaker profile export)
• ADAM Audio A Series (stereo/multichannel speaker profile export)
• Fluid Audio Image series (stereo speaker profile export)

WHAT'S INCLUDED:

• Activation key for the product license (delivered electronically): the product can be activated and used on 3 devices
• SoundID Reference standalone app for Speakers and Headphones (ASIO, WASAPI, APO, HAL)
• SoundID Reference DAW plug-in for Speakers and Headphones (AU, VST2, VST3, AAX)
• Averaged profiles for 480+ supported headphone models

SYSTEM REQUIREMENTS:

• macOS 10.14 Mojave (or later)
• Windows 10 (or later)
• Stable internet connection (offline use not supported)
• Sonarworks supported or Sonarworks individually calibrated headphones
• 2.0 stereo speaker system
• SoundID Reference Measurement Microphone, or Sonarworks XREF 20 Measurement Microphone
• XLR to XLR audio cable

Audio interface requirements during the speaker measurement process:

• +48V Phantom Power support
• The same audio interface must be used for input-output
• The audio interface must support and be set to one of the following sample rate formats: 44.1 kHz, 48 kHz, 88 kHz, 96 kHz, 192 kHz
• The audio hardware setup must consist of a single external hardware device only (additional preamp units are supported)