Sorry, this product is currently unavailable. If you're looking for something that will be of a similar fit in your studio, please contact us using the methods below.

Sennheiser e 912 S Half Cardioid Condenser Boundary Mic – No Longer Available

High-quality, pre-polarized condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech
MFR# 500875

Product Description

The Sennheiser e 912 S is a high-quality, pre-polarized condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech. Due to its unobtrusive, flat design, it is ideally suited for use on conference tables, altars and lecterns.

The e 912 S can be switched on and off via an integrated membrane switch.

 

Features:

  • Programmable membrane switch
  • Unobtrusive, flat design
  • Extremely rugged sound inlet basket
  • Shock-absorbing rubber base
  • Available in black, white, or non-reflective Nextel® grey (shown)
  • Mounting slots for fixed installation in tables, lecterns, etc.
  • Gold-plated XLR connector
  • Integrated electronics (instead of in-line preamp)
  • An internal DIP switch bank provides the following features: on/off (factory preset), push-to-talk button (PTT), push-to-mute button (PTM) or permanently switched on (ON)
  • The frequency response curve can be changed via a second DIP switch bank: low cut, low and high boost (factory preset), low boost or linear (see e 912)

 

Specifications:

  • Impedance: <100Ohm
  • Dimensions: 126.5 x 105 x 26.5mm
  • Connector: XLR-3
  • Frequency response (microphone): 20Hz - 20kHz
  • Weight: ca. 550g
  • Nominal impedance: <100ohm
  • Min. terminating impedance: 1 kOhm
  • Phantom powering: P48
  • Equivalent noise level: 26 dB(A)
  • Equivalent noise level weighted as per CCIR 468-3: 37dB
  • Current consumption: 2.8mA
  • Max. sound pressure level (passive): 134dB SPL

Product Specifications

Condition New
Package Contents Includes pouch and user manual
Length 126 mm
Diameter 105 mm
Unit Weight 550 g
Tube or Solid State Solid State
Transducer Type Pressure Zone (PZM)
Polar Pattern Cardioid
Number of Microphones Single Microphone
Phantom Required Yes
Impedance Nominal: < 100 ohms / Minimum terminating: 1 kOhm
Frequency Range 20 Hz - 20 kHz
Sensitivity -44 dBV/Pa (6 mV)
Max. SPL 134 dB

Product Reviews

No one has written a review yet. Be the first!

* Required Fields

Share Your Opinion

The best gear advice always comes from those who use it the most. That's where you come in! Let the pro audio world hear your voice with a review of the Sennheiser e 912 S Half Cardioid Condenser Boundary Mic. Once you submit your review, please check your email and verify your address to have it posted.

How do you rate this product?
I would like to thank VK for the wonderful sales assistance, service and prices. This was my first purchase with you and it won't be my last. I only wish I'd discovered you years ago!
Matthew R.
I had two Grammy wins this year - Ray LaMontagne & Carolina Chocolate Drops. Both made with help from Vintage King!
Ryan F.
In almost 20 years in Pro audio buying, never did I receive a unit so well packed and exactly as described. Works flawlessly. The whole process has been so smooth. I will never hesitate to do business with you guys in the future and will recommend you to everyone I know.
Martin C.
This was my first experience buying something from Vintage King (although I surf the "used" categories on the website frequently!), and, despite being on the other side of the world, I had absolutely no trouble and everything went very smoothly.
Phil T.