
SKU
Rycote Modular Windshield WS 10 Kit
Product Description
The Rycote Modular Windshield WS 10 Kit is suitable for the Sennheiser MKH 8000 series microphones when used with their MZX XLR modules attached.
The Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required. This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations. A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer.
Rycote suspensions provides complete isolation against handling noise and cable-borne noises, by supporting the microphone in a cradle arrangement using Lyre suspension webs. Windshield
The Windshield basket completely surrounds the microphone and its connector, sliding onto the Modular Suspension to provide up to 30 dB of wind noise attenuation. This is the first layer of windshielding protection for your microphone.
The Windjammer introduced by Rycote in 1985, is high quality synthetic fur covers, designed to fit perfectly over the Modular Windshield. It gives an additional 20 dB of wind noise attenuation. Fitted with a drawstring & toggle to allow snug and easy fitting. Modular Windshield Kits, including zipped Windjammer are also available on request.
Includes:
- One Connbox CB1 (XLR-3F): Suitable for mono microphones with 3-pin XLR
- One XLR Holder MK II: The XLR Holder Mk II fits between any 3/8" male threaded boom pole or mic stand and any 3/8" female microphone shock-mount or windshield system
- One Boom Poles Adaptor
- One Pistol Grip Handle with Lever
- One Windjammer WJ 10: Suitable for use with Windshield 10
- One Windshield WS 10: Suitable for Sennheiser MKH 8000 series
- One Suspension X-Small (XLR-3F): Suitable for small diaphragm condensers in a WS 10
- Two Single Lyre 62 (19/25)
- Brush
- Hex head key
Specifications:
- Windshield Body Length: 120 mm
- Total Windshield Length: 230 mm (includes the End Caps)
- Height of Windshield 100 mm
- Windjammer Fur Length: 40 mm
- Windjammer Fur Colour: Grey
- Microphone Connector: XLR-3F
- Max Wind-noise Attenuation: 50 dB
Compatibility:
- DPA 4018C
- Line Audio Design CM3
- Oktava MC 012/MK 012
- Sennheiser MKH 8040 + MZX
Product Specifications
Condition | New |
---|---|
Length | 9 in |
Please fill out the form below and a Vintage King Audio Consultant will contact you with a ship date for the Rycote Modular Windshield WS 10 Kit.