Rupert Neve Designs R10 10-Space 500 Series Rack #02440 (Used)

The Rupert Neve Designs R10 10-Space 500 Series Rack delivers peace of mind for engineers who demand a higher degree of confidence in their 500 Series racks.

Power-wise, the R10 has more than 150% the required current for a 10-space chassis to prevent the power rails from failing under a higher-than-expected load. To help monitor and troubleshoot problematic modules, the R10 is equipped with LED current metering to show how much power is being used. The internal power supply itself has been carefully designed and double-shielded to avoid significant magnetic induction in any of the channel positions. With such attention to providing and monitoring power, the R10 helps your modules realize their fullest potential.

The chassis is comprised of solid steel with sliding nuts to accommodate various manufacturers modules. All connectors and fittings are of the highest quality to ensure that the R10 will hold up to many years of use.

Because the R10 is built to 500 Series specifications, it will work flawlessly with any properly-designed 500 Series module you wish to include in it. To help accommodate modules that are slightly out of spec, the R10 has variable-position screw holes to help make the installation process as smooth as possible. The 500 Series VCA buss link function can be enabled in pairs on the R6 using the link jumpers on Channels 1-2, 3-4, 5-6, 7-8 or 9-10. Enabling link allows compatible compressor modules like the 543 to share VCA control when their links are enabled. Matching blank panels are also available to cover any empty slots.

FEATURES:

• Each card slot is designed to fit a standard 500 Series module
• More than enough reserve power to maintain proper voltage
• There are three link jumpers, which can be individually set to allow VCA linking on Channels 1-2, 3-4, 5-6, 7-8 and 9-10An LED meter monitors the R10 current usage to ensure that you never run short on power
• Provide rock-solid phantom power to your microphones with the R10’s 48V buss
• Each channel features a balanced XLR and TRS input, which are wired in parallel
• Each channel features a balanced XLR & TRS output
• The IEC power input accepts 100-240 VAC, 50/60 Hz input
• A solid steel enclosure with ultra-strong rack ears gives you the confidence you need to take your 500 Series gear out on the road

SPECIFICATIONS:

• ±16 V DC and +48 V DC for phantom power
• 2650 mA total (2400 mA modules and 250 mA for phantom power)
• 100 - 240 VAC, 50/60 Hz, 50 Watts
• 14 lb
• 19” wide x 7.5” deep x 5.25” high