Remic W3000 G1/WLM Wireless Condenser Microphone
The Remic W3000 G1/WLM Wireless Condenser Microphone is specially designed for brass & woodwind instruments and can be used in any type of live, studio, theatre and broadcast production, and delivers a natural sound response while offering a high suppression of ambient sound sources.
So if you need a microphone with a natural sound and low acoustic feedback response, the REMIC W3000 G1/WLM is the answer.
The microphone housing of the REMIC W3000 G1/WLM is made of black natural rubber to ensure fast, flexible and reliable mounting and comes with a 4 mm cotton woven MOGAMI cable with a length of 2 meters. The microphone can easily be mounted on the bell of the instrument, pointing towards the neck and top valves. This position ensures a fine interaction between the fundamental- and overtone- register of the instrument.
The REMIC W3000 G1/WLM is suitable for brass and woodwind instruments such as; saxophone, trumpet, french horn, flugelhorn, cornet, sax horn, tuba, trombone, tenor horn, baritone horn, euphonium and any related brass or woodwind instruments.
The REMIC W3000G1/WLM supplied with a TA5M connector allows you to connect the REMIC microphone via a variety of adapters to selected SHURE and SENNHEISER wireless transmitters which enables you to gain maximum flexibility to move around on stage during live productions.
It also enables you to connect the W3000 G1/WLM to a standard XLR wired connection.
Due to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES have been designed to support selected wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.
The W3000 G1/WLM is based on the same principle as the W3000 G1 model, but is supplied with a different connector – the TA5M multi connector, which allows you to connect your W3000 G1/WLM microphone to a variety of adapters for Shure and Sennheiser wireless systems as well as the standard XLR.
SUPPORTED WIRELESS SYSTEMS:
RAD 001 | adapter for XLR 48 volt phantom
RAD 003 | TRS 3.5 connector: For Remic studio/live and Live mic to Sennheiser EW-series: SK100G3/G4, SK300G3/G4, SK500G3/G4, Transmitter module 3.5 TRS with screw lock connector.
RAD 006 | TA4 connector: For Remic studio/live and Live to SHURE with TA4F connector. FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M, AD1) Transmitter module with TA4M connector.
RAD 010 | LEMO-3 connector: For Remic studio/live and live microphones to SHURE (UR1M, AD1) and SENNHEISER (SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000) Transmitter modules with LEMO3 connector.
Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.
- Optimized tonal transient response
- Optimized mechanical grip
- Optimized protection of diffusion filter
- Optimized for balanced low impedance transformer inputs
- For studio and live performance
- Superior gain before feedback
- Superior suppression of neighbor instruments and ambient noise
|Tube or Solid State||Solid State|
|Number of Microphones||Single Microphone|
|Frequency Range||6 Hz - 23 kHz|
|Sensitivity||-44 dBV/Pa (5 mV)|
Please fill out the form below and a Vintage King Audio Consultant will contact you with a ship date for the Remic W3000 G1/WLM Wireless Condenser Microphone.
When it comes to getting the best gear, your tastes are probably pretty particular. Vintage King can help answer any and every question to help you make the right decisions for your sound. Fill out the form below and we'll be in contact with you shortly.
Free shipping to the lower 48 US states on orders $99 and up. See details.
* Required Fields