0% up to 48 Months on over 110 Brands!
New & Current Vintage King Card Holders
Designed as a partner for any of the full-range monitors in the S-Series, the Quested SB10R will extend system frequency response down to 20 Hz and increase the system's maximum spl.
The filter bypass on the left channel optimizes the SB10R's performance when it is used as a dedicated LFE monitor in a multi-channel system. With the two-in two-out bass management, a single SB10R can reinforce astereo pair of full range cabinets.
A long throw 10" cast chassis driver is mounted in a tuned cabinet constructed of 26 mm MDF.
Tradition is broken in that the matched 215W RMS amplifier and two-channel SB10R controller are housed in a separate, single 1u rack space unit. Due to this Remote Power, the electronics do not suffer the adverseeffects caused by the LF vibrations that are created by the drive unit. Also, calibration and operation of the SB10R controller are much easierto archive quickly and in comfort with the unit sited close to hand.
Condition | New |
---|---|
Length | 11.4 in |
Width | 24.3 in |
Height | 13.1 in |
Unit Weight | 43.7 lb |
Active or Passive | Passive |
Monitor Application | Sub |
Speaker Configuration | Single speaker |
Driver Sizes | 10" cone |
Number of Speakers | Single |
Input Connectors | Analog XLR, XLR Combo Jack TS |
Amp Wattage | 210 W |
Impedance | 8 Ohms |
Max. SPL | 113 dB RMS |
Please fill out the form below and a Vintage King Audio Consultant will contact you with a ship date for the Quested SB10R - Passive - Single.
For assistance in better understanding the content of this page or any other page within this website, please call 888.653.1184 during normal business hours.
© 1993 - 2023 Vintage King Audio All Rights Reserved. Terms and Conditions | Privacy and Security | Accessibility