{"product_id":"weiss-dac1-mk3","title":"Weiss Engineering DAC1 MK3 Digital to Analog Converter","description":"\u003cp\u003eFor serious audio work, your monitoring chain must provide the most accurate representation possible of your audio material. Their most advanced and precise digital-to-analog converter, the \u003cstrong\u003eWeiss Engineering DAC1\u003c\/strong\u003e is the ultimate in transparency and resolution. With its four digital stereo inputs and several industry-first solutions in its circuit design, this unit is trusted by some of the world’s most respected audio engineers.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_0\"\u003eUNCOMPROMISING\u003c\/h3\u003e\r\n\r\n\u003cp\u003eWeiss Engineering has spearheaded digital audio for over four decades, with a long row of innovations and industry-first products. All that experience has gone into creating the most accurate and transparent digital-to-analog converter imaginable. The DAC1 marks the pinnacle of our converter designs with several unique solutions, and no corners cut. Should the DAC1’s standard digital input configuration not suit your needs, several options are available upon request.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_1\"\u003eUNIQUE DIGITAL SOLUTIONS\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe DAC1 MK3 employs Weiss Engineering’s unique correlation technique. This involves utilizing two of the latest DAC chips on each audio channel, so there is a total of four DAC chips in the unit. Even if the highest quality chips are in use, this solution improves distortion and noise figures compared to using single DAC chips. Several signal re-clocking schemes are combined for extremely high jitter attenuation, making the DAC1 virtually immune to jitter over a very wide bandwidth, down to subsonic frequencies.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_2\"\u003eDISCRETE CLASS A ANALOG\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe DAC1 MK3 uses no less than eight of Weiss Engineering’s own OP1-BPs, which is likely the best operational amplifier available. The discrete Class A outputs have a virtually zero ohms output impedance but are still able to drive large loads without stability problems. Output levels can be set between −infinity and +27 dBu. The outputs are symmetrical but do not employ any sound degrading servo mechanisms. For asymmetrical operation, only one leg of the XLR connector (plus ground) is used.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_3\"\u003eDIGITAL INPUTS\u003c\/h3\u003e\r\n\r\n\u003cp\u003eIn its standard configuration, the DAC1 has three stereo AES\/EBU inputs on XLR connectors, and one on optical TOSLINK. The inputs are switchable from the front panel, allowing for easy switching between digital sound sources. Each XLR input is actively routed to a corresponding XLR digital output, allowing for monitoring at multiple stages in a digital studio setup.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_4\"\u003eAPPLICATIONS\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe DAC1 is commonly used as the first step in a studio’s monitoring chain — feeding the studio speakers an analog output that accurately represents the audio on the digital medium. It is also common to use the DAC1 for incorporating analog equipment into an otherwise digital signal chain when mixing or mastering audio.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_5\"\u003eDAC1 MK2 VS MK3\u003c\/h3\u003e\r\n\r\n\u003cp\u003eWhile the DAC1 MK3 is a superior design from a technical standpoint, some users subjectively prefer the sound of the DAC1 MK2. Therefore, we continue to offer the MK2 version. Any previous DAC1 version can be upgraded to MK3. The output gain trimming also works differently between the two versions, with the MK3 being somewhat easier to set.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_6\"\u003eCONTROLS AND METERS\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe front panel has four switches for selecting which of the four digital inputs is currently active. It also has LEDs for displaying sampling frequency, input word length, and signal presence. The DAC1 MK3 has a single output level trim knob on the back that controls both output channels (L\/R) simultaneously in 1 dB increments. The DAC1 MK2 has an output level range switch (hi\/lo) and two 25-turn trim potentiometers on the front for fine trimming the L\/R output levels. Both versions can be remote controlled with a wired controller connected to the unit’s 15-pin DSUB connectors. This allows for remote control of the output level and input switching. In addition, the units can be configured to accept IR remote control for wireless adjustment of the output level.\u003c\/p\u003e","brand":"Weiss Engineering","offers":[{"title":"Default Title","offer_id":44449543290983,"sku":"21155","price":16014.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/weiss-engeineering-dac1-mk3_21155_1_40a0d2f0-2697-4289-94fb-da8e5c3c4abe.jpg?v=1787089388","url":"https:\/\/vintageking.com\/products\/weiss-dac1-mk3","provider":"Vintage King","version":"1.0","type":"link"}