{"product_id":"walrus-audio-canvas-stereo-dual-line-isolator-d-i","title":"Walrus Audio Canvas Stereo Dual Line Isolator D.I.","description":"\u003cp\u003eConsider this your clean slate. The \u003cstrong\u003eWalrus Audio Canvas Stereo Dual Line Isolator D.I.\u003c\/strong\u003e is a Direct Box\/Line isolator designed to remove any resistance between you and your audience by giving a pristine sonic foundation to build your masterpiece upon. From houses of worship to the dive bar downtown, Canvas Mono is built to be the performance tool that goes wherever you are making your music. Canvas Mono is a Passive Line Isolator (LI) and Direct Injection (DI) device that converts your unbalanced signal into a balanced signal for interfacing properly with your recording interface or mixer at front-of-house. If you’re using an amp-in-a-box (DSP Guitar Rig), like our ACS1, or running an acoustic or bass guitar direct, then the Canvas Mono is your new bridge to the front-of-house. The Canvas Mono packs everything you need from a DI\/LI into a standard pedal-sized enclosure designed to look great right on top of your board.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eDIRECT INJECTION:\u003c\/h3\u003e\r\n\u003cp\u003eUse DI mode when connecting an unbalanced, high impedance source (Electric Guitar, Bass Guitar, etc). The signal will be reduced by -20 dB (-35 dB with pad engaged) and converted to a balanced signal via the transformer connected to the XLR output. Use the gain on your mixer or preamp to bring the signal up to line level.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_1\"\u003eLINE ISOLATOR:\u003c\/h3\u003e\r\n\u003cp\u003eUse LI mode when connecting your unbalanced, low impedance source (Amp + Cab Sim like the ACS1, keys, etc.). The signal will remain full volume and be converted to a balanced signal via the transformer connected to the XLR output. Less preamp gain will be required in LI mode.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_2\"\u003eDI or LI?\u003c\/h3\u003e\r\n\u003cp\u003eWhen deciding between DI or LI, check with the manufacturer of your gear to find the output impedance of the device you are wanting to interface with. For a general guide:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHigh Impedance = anything above 1 k = Use DI\u003c\/li\u003e\r\n\u003cli\u003eLow Impedance = less than 1 k = Use LI\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3 id=\"toc_3\"\u003eTROUBLESHOOTING:\u003c\/h3\u003e\r\n\u003cp\u003eThis is a passive device, so you will not damage anything if connected improperly, but it could affect the signal level and frequency response if not connected properly. This is an easy thing to test since the LI\/DI switch is built into Canvas. If you lose high-frequency information when using LI mode, then you should probably be in DI mode.\u003c\/p\u003e","brand":"Walrus Audio","offers":[{"title":"Default Title","offer_id":44450784772199,"sku":"169815","price":209.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/walrus-canvas-stereo_169815_1_8a2b0544-2954-4024-84f2-d514f4061a35.jpg?v=1787094523","url":"https:\/\/vintageking.com\/products\/walrus-audio-canvas-stereo-dual-line-isolator-d-i","provider":"Vintage King","version":"1.0","type":"link"}