Meyer Sound UPQ-D2 Narrow Coverage Loudspeaker
The Meyer Sound UPQ-D2 Narrow Coverage Loudspeaker evolves from the UPQ-1P and UPQ-2P product line, now optimized using the advanced amplifier and processing technology that made the LEO family an award-winning product line.
The UPQ-D2 offers a focused beamwidth, which yields precise coverage and minimal interaction with walls and neighboring loudspeakers in arrays. This feature makes it an ideal solution for small to mid-sized venues, houses of worship, theaters, and nightclubs—as either a stand-alone loudspeaker or as part of an array. The Constant-Q horn’s smooth and accurate performance, the result of meticulous research in Meyer Sound’s anechoic chamber, exhibits a remarkably consistent beamwidth in both the horizontal and vertical planes across a wide frequency range of 1–18 kHz. The UPQ‑D2 horn also delivers uniform attenuation for all frequencies outside the specified beamwidth.
In addition to the Constant‑Q horn, the loudspeaker features a low-frequency 15-inch neodymium magnet cone driver and 4-inch diaphragm compression driver, both designed and manufactured at Meyer Sound’s Berkeley, California headquarters.
The proprietary two‑channel, class D power amplifier yields a total power output of 2250 watts. Audio input routes through electronic crossover and correction filters, as well as through driver‑protection circuitry. Phase‑corrected processing ensures a flat acoustical amplitude and phase response, resulting in an exceptional impulse response and precise imaging.
Each amplifier channel has sophisticated limiters that are easily monitored with the limit LEDs on the unit’s rear panel. The UPQ‑D2’s modular amplifier and processing electronics incorporate Meyer Sound’s Intelligent AC power supply, which adapts to any power voltage worldwide and provides soft‑turn on and transient protection. The UPQ‑D2 uses an XLR 3-pin female input with male loop output connector.
The optional RMS remote monitoring system module provides comprehensive monitoring of loudspeaker parameters from a host computer running Compass® software. An optional XLR 5-pin connector is available to accommodate both balanced audio and RMS signals.
The UPQ‑D2 provides extremely high power output with low distortion in a vented two‑way enclosure. The UPQ‑D2’s durable trapezoidal enclosure has a slightly textured black finish, an integral stand mount receptacle, and versatile rigging endplates. Made of heavy‑duty, high‑strength, corrosion‑resistant 6061‑T6 aluminum, the endplates incorporate threaded M10 attachment points.
- Focused symmetrical pattern affords precise coverage and arrayability in horizontal or vertical clusters
- Highly energy efficient amplifier with sophisticated digital signal processing that provides extraordinarily flat amplitude and phase response for tonal accuracy and precise imaging
- Integral stand mount and QuickFly mounting options facilitate rigging
- Constant-Q horn affords uniform response throughout coverage area
- Exceptional size to power ratio provides application flexibility
- Consistent and predictable performance ensures accurate system design
|Package Contents||Meyer Sound UPQ-D2 Narrow Coverage Loudspeaker|
|Unit Weight||95 lb|
|Active or Passive||Active|
|Input Connectors||Analog XLR|
|Amp Wattage||2250 w|
|Frequency Range||55 Hz – 18 kHz|
|Max. SPL||138 dB with 19 dB crest factor (M-noise), 134.5 dB (Pink noise), 137 dB (B-noise)|
Please fill out the form below and a Vintage King Audio Consultant will contact you with a ship date for the Meyer Sound UPQ-D2 Narrow Coverage Loudspeaker.
When it comes to getting the best gear, your tastes are probably pretty particular. Vintage King can help answer any and every question to help you make the right decisions for your sound. Fill out the form below and we'll be in contact with you shortly.
Free shipping to the lower 48 US states on orders $99 and up. See details.
* Required Fields