Mesanovic Microphones Model 2 with Soyuz Launcher Bundle

Add 26 dB of vintage analog console gain to your favorite dynamic or passive ribbon microphone when you bundle it with the Soyuz Launcher in-line preamp - an exclusive offer from Vintage King. The Mesanovic Microphones Model 2 with Soyuz Launcher Bundle pairs the Launcher with Mesanovic's Model 2 passive ribbon microphone which features the most extended high-end frequency response of any ribbon mic. To complete the bundle you get an On-Stage MS7701TB Telescoping Euro boom mic stand plus two of Vintage King's 10-foot Basic Series microphone cables, designed for the most demanding studio and performance applications!

MESANOVIC MODEL 2 PASSIVE RIBBON MICROPHONE

The Mesanovic Microphones Model 2 - Stainless Steel is a ribbon microphone that pushes modern design to its limits. The Model 2 is a passive ribbon that is completely handcrafted in Detroit, Michigan. It features a 1.8 micron thick, 2-inch long pure aluminum ribbon. The ribbon motor was designed to have a very short front to back path length as well as custom resonator plates. These features give the Model 2 an incredibly extended high-frequency response, while retaining classic ribbon midrange and a rich, low end that reaches flat out to 20 Hz. You can hear the high frequency "air" in this microphone, something not common in ribbons. The Model 2 features Mesanovic's unique in-house wound toroidal transformer. This transformer provides extremely low distortion, low noise, incredible high-frequency detail, and a 3D like sound. The microphone's slim body (1.25 inches in diameter) allows it to be used with most third-party shock mounts and allows for quick and easy setup.

The Model 2 sounds great on all sources. Its smooth, flat extended response makes it an excellent choice on vocals, guitar amps, drums, strings, brass, piano, and much more. It is recommended using this mic on sources where you would usually not reach for a ribbon - you won't be disappointed. Like the Model 1, the Model 2 also delivers an amazingly quick transient response.

Mesanovic offer a lifetime warranty with their microphones because they are certain they are built for years of use. The microphone ships with a cherry wood case, mount clip, and protective pouch.

FEATURES:

• The most extended high end frequency response of any ribbon
• Classic ribbon smoothness with an open and transparent low end
• All-original design delivering unique sonic character
• All stainless steel construction
• Low noise, low distortion, exceptional detail, and 3D like sound
• 100% handcrafted in Detroit, MI

SOYUZ LAUNCHER MICROPHONE GAIN BOOSTER

The Launcher is not meant to be transparent and clean like other “gain boosters” on the market. Imagine taking a piece of a vintage analog console and putting it in a magic little box. It’s no longer a fantasy with the Launcher.

If you’ve ever struggled to get “that” sound when plugging your mic into an interface without an external preamp, then struggle no more. The Launcher makes your mics sound like they’re running through a vintage console– even when they’re plugged into a simple interface or PA system.

DREAM IN COLOR

The Launcher imparts a truly special character and color that will bring your sound to the next level. With its custom hand wound transformer, the Launcher’s warm character will forever change the way you look at dynamic and ribbon microphones.

PREPARE FOR TAKE OFF

Whether on the stage, in the booth, or in your bedroom, the Launcher gives your microphones the ability to perform incredibly well with virtually any interface or preamp by optimizing the sound of your source, boosting your gain by 26 dB, and lowering the amount of audible noise in your signal chain.

TAKE YOUR SOUND WITH YOU

If you’re a musician, home or professional engineer, podcaster, voiceover artist, or just someone who loves making videos, the Launcher will take your sound to the next level. You don’t need a huge studio to have a huge sound – the Launcher will get you there no matter the time or place.

COUNTDOWN TO PERFECT SOUND

The Launcher is the culmination of years of beta testing and feedback from real musicians and engineers around the world. The launcher’s custom transformer and proprietary circuit have become one of Soyuz’s most closely guarded secrets. Every Launcher is hand-built in the Soyuz facility.

FEATURES:

• Frequency Range: 10 Hz – 20 kHz (-1 dB)
• Gain: 26 dB (load >1 kOhms)
• Max output level (0.5% THD): 8.3 dBV (2.6 V)
• Output noise level: 8 μV (JIS-A)
• Powering: 48 Volts according to IEC 61938
• Electrical impedance: 1 kOhms
• Recommended load impedance: >1 kOhms
• Current consumption: 5.0 mA
• Connectivity: 3-pin male/female XLR connector

VINTAGE KING BASIC SERIES MICROPHONE CABLE

We know you need excellent, reliable cables that don't cost a fortune. That's why we designed our own line of premium Vintage King Cables, assembled right here in Detroit, Michigan. With Vintage King cables, you get superior value without compromising sound or quality. We teamed up with a local manufacturer to pick the very best cabling and components to build our rugged-tough cables, purposefully designing them for the most demanding studio and performance applications.

The Vintage King Basic Series Cables combine quality and affordability to meet any budget. Sonic transparency is top notch! They use quality, pure bare copper cabling and Amphenol or Rean connectors for reliability. If you’re looking for a functional cable at an amazing price, you will be making a smart choice with our Basic Series.

No matter whether you’re working in a large scale recording studio, private mix space, or live venue, your sound will be great with any of our cables: if we don't believe in it, we don’t carry it.

EXTENDED WARRANTY

We believe in our cables and stand behind them with a one year warranty, extended to two-years FREE. Unless you've done something crazy like cut them in half, we'll replace them within those two years. Go ahead and put your Vintage King cables to the test. In the event you ever need to use our warranty, the process is easy and hassle free. Just contact us and we'll take care of everything right away.

On-Stage Stands MS7701TB telescoping Euro Boom

The On-Stage Stands MS7701TB telescoping Euro Boom boasts a hybrid sheet metal and composite leg housing, making it virtually unbreakable. With a removable, telescopic boom arm and its ability to fold flat, this stand is a must for every member of the band. Features a zinc mid-point clutch and black finish.

On-Stage Stands have become the industry standard around the world. Innovative features and unsurpassed quality make these floor stands a staple on stages everywhere.

FEATURES:

• Steel midpoint locking clutch
• Telescoping boom: 20 - 36 in
• Height Adjustment: 32 - 61.5 in
• Base Spread: 23 in