Manley Dual Mono Mic Pre #385 (Used)

The Manley Dual Mono Mic Preamp gives you two channels of huge Manley tone, and offers 40 to 60 dBs of gain, so you have plenty of lift for most ribbon microphones. The Dual Mono Mic Pre's gain is selectable in precise 5 dB steps - plus, you can use it alongside the input attenuator to summon a range of tones, from mellow to aggressive. What's more, there are 1/4" direct input jacks onboard, for enhancing your bass, drum machines, keyboards, and more with the renowned Manley Dual Mono Mic Pre's rich, tube tone.

Manley Dual Mono Mic Pre at a Glance:

• Two channels with 48 V phantom power and phase control
• Gain switch for variable feedback
• 1/4" Direct Input jacks
• Balanced and unbalanced outputs
• Two channels with 48 V phantom power and phase control

The Manley Dual Mono Mic Pre offers up two channels with plenty of gain (40 - 60 dB) to support virtually any microphone you put in front of it. Phantom power is individually selectable on each channel and there's a convenient phase switch on each channel, as well.

GAIN SWITCH FOR VARIABLE FEEDBACK

The Dual Mono Mic Pre's clever gain switch lets you control how much feedback is introduced around the tube circuit, so you can achieve a wide variety of tones and amplification levels. Change tonal tube flavors quickly and easily as you dial in everything from the laid back and mellow to the up-front and aggressive - it's a great way to get creative and track down that "perfect" sound for each vocalist or instrument.

1/4" DIRECT INPUT JACKS

Introduce any instrument to that rounder, "tube-y" tone using the Dual Mono Mic Pre's front-panel Direct Input jacks. When used in this way, the total gain becomes 20 dB less than indicated on the front panel.

BALANCED AND UNBALANCED OUTPUTS

With the Manley Dual Mono Mic Pre, both transformer-coupled balanced outputs and direct capacitor-coupled unbalanced outputs are available, so you can choose between audiophile-pure or big iron sounds.

FEATURES:

• Manley input and output transformers with nickel laminations in mu-metal cases
• Flat frequency response from 10 Hz - 60 kHz
• Mic input PHASE REVERSE switch
• 2400 ohm mic input Z; 48 V phantom power built-in
• Hi-Z (100k ohm) 1/4" DIRECT INPUT
• Noiseless conductive plastic INPUT attenuators
• <0.05% THD @ 1 kHz S/N ratio: 80 dB
• EIN: -125 dB
• Adjustable FEEDBACK / GAIN switch selects 5 dB steps between 40 to 60 dB of gain
• Hi-current drive <50 ohm LO-Z 1/4" & XLR outputs
• AUTO MUTE w/ warm-up delay for power up/down
• Max. input (with input pad fully open): 450mV
• Max. output: +32 dBu
• Max. output (into 600 ohm load): (+15 dBm)
• Power consumption Mono units: 18 watts; Dual Mono units: 36 W
• Mains Voltage Frequency: 50~ 60 Hz
• Dimensions: 19" x 1 3/4" x 10" (occupies 1 RU)