Lynx Studio Technology Aurora 8 w/ LT-ADAT (Used) – No Longer Available

Features:

• 8-channel 24-bit / 192 kHz Analog I/O
• 8-channel 24-bit / 192 kHz Digital I/O
• MIDI I/O
• LT-ADAT card pre-installed

Aurora 16 and Aurora 8 are 16 and 8 channel 24-bit/192 kHz analog-to-digital/digital-to-analog converters in a single-space rack-mount case. Representing Lynx Studio Technology’s first rack-mount product, Aurora was developed using the next generation of Lynx acclaimed conversion technology and rock-solid digital interface circuitry. Both units are identical in features and specifications except for the number of I/O channels.

Aurora provides professional I/O interfaces for ease of installation in most studios and live sound applications. The analog I/O is electronically balanced and supports both +4dBU and –10dBV nominal levels. The AES digital I/O is transformer coupled and is capable of driving 500 feet of cable at 192kHz. Both dual and single-wire AES channel modes are supported.

Aurora’s ergonomically designed front panel provides easy access to important controls and signal status. Unique to this product class, Aurora also offers extensive remote control capability. All front panel features as well as other low-level options can be controlled from the Lynx AES16 digital interface card on Windows and Macintosh platforms; a Pocket PC or laptop via infrared; MIDI; or an LSlot interface card. Multiple remote set-up configurations can be stored and recalled.

The on-board 32-channel digital mixer provides extensive routing and mixing options. Acting as a powerful patch bay style digital router, Aurora can easily route signals between analog and digital inputs on a channel-by-channel basis. Mixing capability on each output also provides flexible zero latency monitoring.

The LSlot expansion port accepts cards that provide compatibility with current and emerging digital interface standards, including ADAT and others.

Lynx’s proprietary SynchroLock™ jitter reduction technology, from the AES16, is also included. This exclusive feature provides extreme jitter reduction of up to 3000:1, allowing Aurora to output an extremely clean clock output for driving the digital audio system.

All analog and digital connections use DB25 connectors with industry standard pin-outs which are compatible with off-the-shelf cables from Lynx as well as from manufacturers such as Mogami, ProCo, Hosa and others.

LT-ADAT

The LT-ADAT adds up to 16 Lightpipe inputs and outputs to Aurora's already powerful I/O capabilities. LT-ADAT is an LSlot device for Lynx Aurora 8 and Aurora 16 converters that adds up to 16 channels of high-performance ADAT Lightpipe input and output. The LT-ADAT is a full-function ADAT interface that provides two ADAT Lightpipe inputs and two outputs. Operating at a sample rate of 48 kHz, the LT-ADAT I/O channel capacity is 16. Higher sample rates are supported using S/MUX technology: 8 channels at 96 kHz and 4 channels at 192 kHz.

Easily installed inside the Aurora 16 and Aurora 8, the LT-ADAT connects via ribbon cable to the host converter. Channel routing is controlled from the Aurora front panel or by computer via the Lynx AES16. The LT-ADAT clock can be slaved to Aurora or a Lightpipe optical signal. Even when slaving to Lightpipe, Aurora’s SynchroLock technology provides immunity to high levels of jitter, which is typical in optical signals.

LT-ADAT also allows Aurora to function as a bi-directional format converter, converting ADAT to AES/EBU and analog and back to ADAT.

• Adds 16 Lightpipe I/O channels at up to 48 kHz to Aurora converters
• Higher sample rates attainable via S/MUX technology
• Easily installed into Aurora’s LSlot bay
• Controlled via Aurora front panel or by computer via AES16.
• ADAT/AES-EBU bidirectional format converter
• Flexible clocking options
• FPGA core allows field upgraded of firmware
• RoHS compliant