0% up to 48 Months on over 110 Brands!
New & Current Vintage King Card Holders
Versatility and durability, plus optimal suitability for punishing touring conditions with no compromises on sound: this is what the Lewitt MTP 840 DM stands for. Its excellent transient response, refined electronics, and superior capsule design make the MTP 840 DM a unique tool for onstage use. Innovatively designed circuitry and the highest-quality components make for exceptionally low self-noise and a maximum of dynamic range when in Active Mode, and the frequency curve, – which is specially tailored for vocal recordings – provides the ultimate in sound quality. A three-step low-cut filter directly influences the proximity effect, permitting adaptation of the mic to individual preferences. The built-in three-position switchable amplifier, is specially adapted to the MTP 840 DM’s components, allowing lossless recording of even far-off sources. A supercardioid polar pattern provides maximum protection against feedback, and the flexibly suspended capsule reduces structure-borne noise to a minimum. The MTP 840 DM transports the artist’s voice in a powerful way, lending it the necessary presence without falsifying its individual character.
The supercardioid polar pattern guarantees super-high gain before feedback. Like all microphones from the MTP series, the MTP 840 DM has an amazingly consistent polar pattern all across its entire frequency spectrum. And even with more than half of the wire-mesh cup covered, it will not lose any rear rejection.
Boost your signal by switching to Active Mode - for ear-catching realism and distortion-free sonic depth. Take control over the low-cut filter to adjust the proximity effect to the artist and the application.
The structure-in-structure architecture provides the basis for the MTP series' ruggedness. The outside enclosure of wire-mesh cup and ring is made of sturdy spring steel, while the body consists of durable zinc die -cast parts. The inner enclosure is made of resilient but lightweight nylon enforced-reinforced ABS. This design ensures the best possible protection for the rough daily touring routines.
The structure-in-structure architecture provides the basis for the MTP series' ruggedness. The outside enclosure of wire-mesh cup and ring is made of sturdy spring steel, while the body consists of durable zinc die-cast parts. The inner enclosure is made of resilient but lightweight nylon enforced-reinforced ABS. This design ensures the best possible protection for the rough daily touring routines.
Condition | New |
---|---|
Package Contents | MTP 840 DM microphone, mic clip, and bag |
Length | 7.2 in |
Diameter | 2 in |
Unit Weight | 0.7 lb |
Tube or Solid State | Solid State |
Transducer Type | Dynamic |
Polar Pattern | Super-Cardioid |
Number of Microphones | Single Microphone |
Impedance | 600 Ohms |
Frequency Range | 40 Hz - 18 kHz |
Filters | 150 Hz (12 dB/oct); 250 Hz (12 dB/oct) linear |
Sensitivity | -49 dBV/Pa (3.5 mV) |
Analog or Digital | Analog |
Please fill out the form below and a Vintage King Audio Consultant will contact you with a ship date for the Lewitt MTP 840 DM Handheld Dynamic Microphone.
For assistance in better understanding the content of this page or any other page within this website, please call 888.653.1184 during normal business hours.
© 1993 - 2023 Vintage King Audio All Rights Reserved. Terms and Conditions | Privacy and Security | Accessibility