Our sales line is open Saturdays 12pm-7pm ET. Give us a call at 888.653.1184.

Jomox Mod.Brane 11

19“ Eurorack module for percussion sounds
MFR# Mod.Brane 11
Jomox Mod.Brane 11
No interest if paid in full within 12 months Learn more
Special Order
Note: This item may not be returnable or could require a restocking fee. Contact one of our Audio Consultants for more details. Due to the special nature of this item, we order each unit fresh from the factory, exclusively for you! Lead times may vary so please chat, call or email for up-to-date inventory status.

The Jomox Mod.Brane 11 is a 19" Eurorack module with full CV/Gate capabilities, built-in MIDI and full storability.

Looking at the skins of an acoustic drum, you can find two vibrating membranes that modulate and interact with each other by the coupling through pressure waves of the content air.

That produces the typical sound of a drum. Non-linear waves on a two-dimensional membrane which is co-excited from the other. By resonance and counteractive interference new frequency bands and overtones are brought about. Mostly a noise-like signal is added (e.g. snare strainer) that either excites the membranes as adds an own envelope to the resulting sound.

In the Mod.Brane 11 there are two 2-pole filters (F-OSCs) arranged in a way that dampen is like a limited range of resonance. They can interact between each other by two coupling parameters 1_2 coupling and 2_1 coupling. Coupling is a combination of addition (mixing) and frequency modulation. 2_1 coupling acts inversely with negative values and even with positive values. So every possible feedback and interference mode can be produced.

A dual noise generator which provides either white noise or a multitone metallic noise or a mixing of both, combined with a decay envelope, can produce percussion-like and cymbal-like tones which are mixed to the rest of the membrane signal. A part of the signal excites the F-OSCs, and the other part is mixed as a noise envelope to the signal.

Two internal LFOs which control the tuning of both F-OSCs expand the sound spectrum once more.

All analog parameters are either storable and controllable via MIDI. The MIDI notes control the pitch of the F-OSCs.

Too, the modules are controllable via CV/Gate and via trigger pads for live drummers. With the trigger input, the threshold and velocity dependent dynamics can be adjusted.

Four routable CV inputs let all internal sound parameters (including LFOs and metallic noise) be controlled by CV sequencers. Every CV input provides an own programmable amount which can be negative too (i.e. subtracting the CV value from the internal value). The range reaches from 0.5 V.


  • Membrane Oscillators M1, M2: 2 F-OSC, each tuneable over the whole audio range and with adjustable dampening
  • Envelopes: 2 analog envelopes for membranes and noise that are controlled by one parameter (decay)
  • 1_2 Coupl: coupling between F-OSCs 1 and 2
  • 2_1 Coupl: coupling between F-OSCs 2 and 1, can be phase inverted (±)
  • Noise: White Noise, 2x Metal Noise with each 499 different noise pattern combinations, Metal noise II has an adjustable bit mask
  • Gate T: Trigger gate time 0.5ms-10ms, up to 4-times multi trigger possible
  • LFO: 8 wave forms: Saw ±, Sine ±, Tri ±, Rect ±, modulates the pitch of one or both the F-OSC, starts always syncronous to the note trigger and is pitch envelope at the same time
  • CV1-CV4: can route the external 0-5 V CV signals to any of the above parameters including LFOs
  • LIN. FM: This is a true analog dedicated CV FM modulation input for both F-OSCs. It only works linear-wise and does not offer musical semitones across the CV scale
  • MIDI: The MIDI controllers of this module are identical to the M.Brane 1_1 - all parameters including LFO can be remotely controlled by MIDI CCs
  • Bus Vol: Programmable level of the audio out signal mixed to the Jomox system bus on the rear and will work with future master modules
  • Bus Send: Serves as the programmable FX send to the Jomox system bus on the backside and will work with future effects modules

Additional Information

Condition New
Depth 53 mm
Chassis Module
Module Slot Count 20hp
Connector Type 3.5 mm
Power Consumption 140 mA +12 V / 80 mA -12 V
No one has written a review yet. Be the first!

Share Your Opinion

The best gear advice always comes from those who use it the most. That's where you come in! Let the pro audio world hear your voice with a review of the Jomox Mod.Brane 11. Once you submit your review, please check your email and verify your address to have it posted.

How do you rate this product?

Blog Posts

Have some questions about this item?

When it comes to getting the best gear, your tastes are probably pretty particular. Vintage King can help answer any and every question to help you make the right decisions for your sound. Fill out the form below and we'll be in contact with you shortly.

Free Shipping in the USA and 50% Off International Shipping! See terms.

* Required Fields