JBL PRX735 1500W 15" Three-Way Full-Range Main System

The JBL PRX735 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth.

Features

• 136 dB peak SPL
• 15" Differential Drive® low-frequency driver for low-distortion and higher SPL
• 165 mm (6.5 in) horn loaded midrange transducer
• 1.5" diameter next generation JBL neodymium compression driver
• JBL designed waveguide for accurate coverage
• Efficient Class-D amplifier technology
• Normal and Boost user selectable EQ presets
• DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
• Line level and direct microphone input capability
• Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through
• Multiple injection molded handles with backing cup for easy transport
• Integrated M10 suspension points for easy setup
• Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL’s tour proven DuraFlex™finish.
• Cloth backed, dent-resistant 16 gauge steel grilles

Specifications

• Power Rating 1500 W
• AC Power Input 100V - 240V~ 50/60 Hz
• Frequency Range (-10 dB) Normal: 35 Hz – 20 kHz
• Boost: 34 Hz – 20 kHz
• Frequency Response (±3 dB) Normal: 42 Hz – 20 kHz
• Boost: 39 Hz – 20 kHz
• Coverage Pattern 90° x 50° nominal
• Directivity Index (DI) 10.5 dB
• Directivity Factor (Q) 11.2
• Crossover Frequency 480 Hz, 2.0 kHz
• Maximum SPL Normal: 136dB
• Boost: 136dB
• Signal indicators Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting
• Signal: Green LED indicates signal present
• Power/Standby: Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio.
• Dynamic Control (Input) dbx Type IV™ limiter circuit
• Input Impedance 20K Ohms (balanced), 10K Ohms (unbalanced)
• LF Driver 1 x JBL 275G 380mm (15 in) woofer
• MF Driver 1 x JBL 196H 165mm (6.5 in) horn-loaded midrange transducer
• HF Driver 1 x JBL 2408H-2 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver"
• Enclosure Trapezoidal, 18 mm, plywood
• Suspension / Mounting 12 x M10 Suspension Points
• Transport 2 x integrated handle with injection molded backing cup
• Finish Obsidian DuraFlex™ finish
• Grille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
• Input Connectors 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
• Output Connector 1 male XLR balanced output
• Dimensions (H x W x D) 952.5 mm x 445.0 mm x 537.97 mm
• (37.5 in x 17.52 in x 21.18 in)
• Net Weight 34.9 kg (77 lb)