
Product Description
The JPL LSR6332 incorporates a 12" Differential Drive® dual coil woofer, 5" Kevlar™ midrange speaker and 1" titanium composite tweeter. THX® pm3 approved.
Features:
- Advanced Linear Spatial Reference design ensures flatter response at the mix position
- Differential Drive® technology with dynamic braking for extended low frequency response and low power compression
- Neodymium midrange with 2" voice coil and Kevlar™ cone material for extended frequency response and low distortion
- Titanium composite high frequency transducer with elliptical oblate spheroidal waveguide and damped polepiece
- High-density baffle for low enclosure resonance and stable inertial ground
- Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression
- Magnetically shielded for use near video monitors
- Reinforced enclosure and convenient mounting points allow mounted installation
- Midrange/high frequency sub-baffle may be rotated by user for horizontal or vertical orientation
- Available as mirror image left and right models
Specifications:
- Input impedance: 4 ohm (nominal)
- Anechoic sensitivity: 93 dB/2.83 V/1 m (90 dB/ 1 W/ 1 m)
- Frequency response: +1. -1.5 dB (60 Hz – 22 kHz)
- Low frequency extension: -3 dB: 54 Hz -10 dB: 35 Hz
- Enclosure resonance frequency: 33 Hz
- Long term maximum power (IEC265-5): 200 W continuous average; 800 W peak
- Recommended amplifier power: 150 W - 1000 W (rating into 4-ohm load)
- High frequency control: 0 dB, -1 dB (2.5 to 20 kHz)
- Distortion, 96 dB SPL, 1 m: 2nd Harmonic (below 120 Hz): <1.5% - 3rd Harmonic (below 120 Hz): <1% - 2nd Harmonic (120 Hz to 20 kHz): <0.5% - 3rd Harmonic (120 Hz to 20 kHz): <0.4%
- Distortion, 102 dB SPL, 1 m: 2nd Harmonic (below 120 Hz): <1.5% - 3rd Harmonic (below 120 Hz): <1% - 2nd Harmonic (80 Hz to 20kHz): <1% - 3rd Harmonic (80 Hz to 20kHz): <1% (<0.4%, 250 Hz - 20 kHz)
- Power nonlinearity: 30 W (20 Hz to 20 kHz): <0.4 dB 100 W (20 Hz to 20 kHz): <1.0 dB
- Low-mid frequency crossover: 4th Order Acoustic Linkwitz-Riley: 250 Hz
- Mid-high frequency crossover: 4th Order Acoustic Linkwitz-Riley: 2.2 kHz
Product Specifications
Condition | New |
---|---|
Length | 11.5 in |
Width | 25 in |
Height | 15.5 in |
Unit Weight | 45 lb |
Active or Passive | Active |
Monitor Application | Mid-Field |
Speaker Configuration | Three-Way |
Driver Sizes | 12" |
Number of Speakers | Single |
Input Connectors | 1/4-inch TS, Analog XLR |
Amp Wattage | 1000 W |
Impedance | 4 Ohms |
Frequency Range | 60 Hz - 22 kHz, +1 dB, -1.5 dB |
Max. SPL | 93 dB |
Please fill out the form below and a Vintage King Audio Consultant will contact you with a ship date for the JBL LSR6332L - Single.
Have a better price in mind for the JBL LSR6332L - Single that you've been checking out?
We're willing to work on it!Please fill out the form below with your contact information.Once the form is submitted, a Vintage King Audio Consultant will contact you as soon as possible with our best price on this product.