JBL LSR6328P - Pair (Demo Deal)

The JBL LSR6328P is the choice for stereo and multi-channel music and post audio applications where accuracy and high SPL are required. THX® pm3 Approved. METAlliance® Certified.

FEATURES

• Advanced Linear Spatial Reference design ensures flatter-off-axis response for greater clarity at the mix position.
• RMC™ Room Mode Correction provides electronic control of room modes. User measurement and
• calibration kit available.
• Differential Drive® technology with dynamic braking for extended low frequency response and minimal
• power compression.
• Integrated bi-amplification with factory calibrated sensitivities.
• Titanium composite high frequency transducer with Elliptical Oblate Spheroidal waveguide for precise
• pattern control.
• Magnetically shielded high frequency transducer minimizes interference when used in close proximity to
• video monitors.
• High-density baffle for low enclosure resonance.
• Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
• Reinforced enclosure and convenient mounting points for mounted installation.
• Integral handles facilitate ease of positioning.

SPECIFICATIONS

• Frequency Response: 50 Hz - 20 kHz (+1, -1.5 dB)
• Enclosure Resonance Frequency: 38 Hz
• Low Frequency Extension: User controls set to default
• -3 dB: 46 Hz
• 10 dB: 36 Hz
• Low-High Frequency Crossover: 1.7 kHz 6th-order acoustic Linkwitz-Riley
• Distortion, 96 dB SPL, 1m : N/A
• Mid-High Frequency (120 Hz - 20 kHz): N/A
• 2nd Harmonic: <0.6%
• 3rd Harmonic: <1%
• Maximum SPL (80 Hz - 20 kHz): >108 dB SPL / 1m
• Maximum Peak SPL (80 Hz - 20 kHz): >111 dB SPL / 1m
• Signal Input: Neutrik “Combi” XLR-1⁄4-in tip-ring-sleeve balanced or unbalanced positive voltage applied to XLR pin 2 (1⁄4" tip) produces outward woofer motion
• Calibrated Input Sensitivity, XLR & 1⁄4": N/A
• +4 dBu / +8 dBu: 96 dB SPL / 1 m
• -10 dBV: 96 dB SPL / 1 m
• AC Input Voltage: 100 / 240 VAC
• AC Input Connector: IEC
• Long-Term Maximum System Power: 220 W (IEC265-5)
• Self-Generated Noise Level: <+10 dBA / 1 m Tonal-artifact-free