0% up to 48 Months on over 110 Brands!

New & Current Vintage King Card Holders

$ 21,492 .17
or $481/month for 60 months Based on 60 monthly payments of $481 on approved credit (OAC). Learn more about leasing
Special Order
Note: This item may not be returnable or could require a restocking fee. Contact one of our Audio Consultants for more details. Due to the special nature of this item, we order each unit fresh from the factory, exclusively for you! Lead times may vary so please chat, call or email for up-to-date inventory status.

SKU

186139

JBL 7.1.4 Immersive Monitoring Bundle 2

Comprehensive Atmos/immersive sound active monitoring bundle including JBL active speakers and subs with stands

Product Description

If you're ready to bring your studio into the immersive world of Dolby Atmos 7.1.4, Vintage King Audio has your monitoring needs covered! The JBL 7.1.4 Immersive Monitoring Bundle 2 is a comprehensive monitoring system including passive speakers and sub, and amplifiers with stands and mounting solutions.

The primary component of the system is JBL's LSR705i 5" passive studio monitor which is used for the left/center/right, surround, and overhead channels. The 705i features JBL's patented Image Control Waveguide for detailed imaging and a broad, room-friendly sweet spot as well as next-generation JBL transducers for optimized transient response and improved linearity. A single ASB6112 compact 12" passive studio subwoofer is included to push the LFE.

Crown DriveCore Install series amplifiers power the speakers. These amplifiers are are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

Triad-Orbit SM-series mounts are used to mount speakers on the wall/ceiling. This uniquely designed patent-pending speaker mounting system allows the installer to meet the critical demands of Dolby Atmos installations providing unparalleled flexibility in mounting and alignment options, saving time in installation and laser alignment.

Dolby Atmos naming taxonomy is structured as follows: Standard Channels.LFE (Low Frequency Effects) Channels.Overhead Channels. So, for example, a 7.1.4 Dolby Atmos system consists of seven standard channels (left front, center, right front, left side surround [Lss], right side surround [Rss], left rear surround [Lrs] and right rear surround [Rrs]), one LFE channel, and four overhead channels. Learn more about mixing with Dolby Atmos here.

JBL 7.1.4 IMMERSIVE MONITORING BUNDLE 2 INCLUDES:


JBL LSR705I 5" MASTER REFERENCE MONITOR (QTY: 11 SPEAKERS TOTAL)

The first in JBL’s 7 Series line, the JBL LSR705i studio monitor answers the call for next generation multi-channel monitoring in post rooms, broadcast facilities and trucks. Leveraging patented technologies developed for JBL's flagship M2 Master Reference Monitor, 7 Series Studio Monitors deliver detailed imaging, extended frequency response and remarkable output from compact enclosures. Centrally amplified and tuned, and easily installed, 705i studio monitors are the heart of an elegant, scalable system for broadcast and post facilities working in immersive audio formats.


JBL ASB6112 4000 W 12-INCH PASSIVE SUBWOOFER (QTY: 1 SPEAKER TOTAL)

The JBL ASB6112 is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL’s 2263H Differential Drive dual coil dual gap 12" woofer. This woofer features neodymium magnet and ultra robust cone for extra long life.


CROWN XLI2500 2-CHANNEL POWER AMPLIFIER (QTY: 1 TOTAL)

The Crown Audio XLI series of power amplifiers from Crown represents a new era in affordable, quality power amplification. They are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755 or 1.4 V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.


CROWN DCI 8|300 8-CHANNEL POWER AMPLIFIER (QTY: 1 TOTAL)

The Crown Audio DCi 8|300 is an 8-channel, 300W/4 Ohm analog power amplifier. The new DriveCore Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.


TRIAD-ORBIT SM-705B SPEAKER MOUNTING BRACKET (QTY: 11 TOTAL)

The Triad-Orbit SM-705B U bracket is designed to house the LSR705i speaker powered speaker and has 5 different mounting points allowing for optimum angles including 90º vertically or horizontally.


TRIAD-ORBIT SM-SW1 SPEAKER MOUNT SWIVEL (QTY: 11 TOTAL)

The patented Triad-Orbit SM-SW1 is the main pan and tilt swivel fr the SM-1 System. The SM-SW1 controls are redundant with both a locking spring pin and tension knobs. The holes are set in 15 degree increments.


TRIAD-ORBIT SM-WM1 SPEAKER MOUNTING PLATE (QTY: 11 TOTAL)

The patent pending design of the SM1 System utilizes a novel slide in wall or ceiling mount. This allows the installer to set up the speaker and swivel assembly prior to hanging the speaker. The Triad-Orbit SM-WM1 is wall/ceiling mount houses the SM-SW1 swivel. The SM-SW1 slides into the SM-WM1 mount and secures by 4 hex screws. This allows the speaker to be attached to the swivel first and then sliding the assembly in the SM-WM1 mounting plate. It also accepts the SM-PM1 pipe plate.


TRIAD-ORBIT SM-PM1 SPEAKER MOUNTING PLATE (QTY: 4 TOTAL)

The Triad-Orbit SM-PM1 is a 3/4-inch threaded pipe plate for standard 3/4 NTS pipe. The SM-PM1 slides into the SM-WM1 wall plate and also screws in to the SM-SW1 swivel. Two SM-PM1’s are necessary for pipe mounting; one to attach to the wall or ceiling, and the second to attach to the SM-SW1.

Pipe for SM-PM1 not included, plates are threaded for 3/4" NTS pipe so you can build to your own needs.

Product Specifications

Condition New
Active or Passive Passive
Monitor Application Immersive
Number of Speakers 7.1.4 (7 + 1 Sub Channel + 4 Overheads)

Product Reviews

No one has written a review yet. Be the first!

* Required Fields

Share Your Opinion

The best gear advice always comes from those who use it the most. That's where you come in! Let the pro audio world hear your voice with a review of the JBL 7.1.4 Immersive Monitoring Bundle 2 . Once you submit your review, please check your email and verify your address to have it posted.

How do you rate this product?
I would like to thank VK for the wonderful sales assistance, service and prices. This was my first purchase with you and it won't be my last. I only wish I'd discovered you years ago!
Matthew R.
I had two Grammy wins this year - Ray LaMontagne & Carolina Chocolate Drops. Both made with help from Vintage King!
Ryan F.
In almost 20 years in Pro audio buying, never did I receive a unit so well packed and exactly as described. Works flawlessly. The whole process has been so smooth. I will never hesitate to do business with you guys in the future and will recommend you to everyone I know.
Martin C.
This was my first experience buying something from Vintage King (although I surf the "used" categories on the website frequently!), and, despite being on the other side of the world, I had absolutely no trouble and everything went very smoothly.
Phil T.
The speed of delivery exceeded my expectations! I was VERY pleased that my shipment arrived in time for a scheduled vocal tracking session. The packing insured that my order arrived safely. And the sales staff responded quickly to questions regarding the product.
James P.
Thank you so much! Vintage King has been so fair and easy to work with. I can't thank you enough. It feels good to trust such a hefty purchase to folks who are so helpful and knowledgeable. Vintage King is a sound designers dream store.
Noa L.
You guys have excellent customer service and I am excited about the next upgrade I complete on my fifth recording facility. I've been in the studio business for forty plus years. The salesman I worked with at Vintage King was the best of the best. You all rock!
Robby T.
I would recommend Vintage King to any one looking for top-class gear, unbeatable customer service and the best prices on the map!
Jake D.
My experience with Vintage King was excellent. The order was here fast considering it was out of stock. The sales person had SKB send it to me directly and I couldn't have been more pleased.
Michael D.
From the minute I placed my order I was kept well-informed through each step in your process. Even though I was buying a comparatively modest piece of gear, your attention to detail made me feel like I was purchasing a six-figure mixing desk.
Thomas W.
I am a new customer of yours. You guys provided me the absolute best deals in ordering all the equipment to power my brand new recording studio. Your customer service is amazing and i will always deal with you from here on out.
Rob M.
Thanks for your great service and getting this out today. You guys really are the Kings!
Alan B.
Better than expected! Truly impeccable service. Your team was professional, knowledgeable, provided speedy delivery above and beyond standard. Vintage King Audio is definitely my go to for all of my audio and information needs.
James O.