Focusrite Scarlett 2i2 USB Audio Interface – No Longer Available

The Focusrite Scarlett 2i2 is a 2 in / 2 out USB 2.0 audio interface delivering a high quality audio signal path inside a very attractive and robust anodized aluminum unibody casing. Including two award winning Focusrite microphone preamplifiers, Scarlett 2i2 is perfect for musicians new to recording as well as those who require a high quality yet compact interface.

Features

• Two high-quality award-winning Focusrite preamps
• Anodized Aluminum Unibody Chassis
• Ring LED signal indicators
• High-quality 24-bit/96 KHz USB interface
• Direct monitor function for zero latency tracking
• USB bus-powered
• Scarlett VST/AU/RTAS Plug-in Suite

Analog Input Performance

Mic

• Frequency Response: 20Hz - 20kHz +/- 0.1 dB
• THD+N: -100dB (minimum gain, -1 dBFS input with 20 Hz - 20 kHz filter)
• Equivalent Input Noise(EIN):-127 dB: measured at maximum gain with 150 Ohm termination (20 Hz - 20 kHz
• filter)
• Gain Range: -4 dB to + 46 dB
• Max Input Level: +4dBu

Line

• Frequency Response: 20Hz - 20kHz +/- 0.1dB
• THD+N: -91dB (measured at minimum gain with -1 dBFS input and 20 Hz - 20 kHz filter)
• Noise: -104 dBu (measured at minimum gain, with a 20 Hz - 20 kHz filter)
• Signal to Noise Ratio: > 100dB
• Gain Range: -21 dB to +29 dB
• Max Input Level: +20dBu

Instrument

• Frequency Response: 20Hz - 20kHz +/- 0.1dB
• THD+N: -72dB (measured at minimum gain with -1dBFS signal and 20 Hz - 20 kHz filter)
• Noise: -87dBu (20Hz/20kHz bandpass filter)
• Gain Range: -4dB to +46 dB
• Max Input Level: +4dBu

Analog Output Performance

• Nominal Output Level: 0dBFS = 10dBu, balanced
• Frequency Response: 20Hz - 20kHz +/- 0.2dB
• THD+N: -100dB (measured with -1dBFS input and 20Hz - 20 kHz filter, unweighted)
• Output Impedance: < 10Ω
• Power Output into 150Ω: 15mW
• Power Output into 50Ω: 30mW

Digital Performance

• Clock sources: Internal clock only
• A-D Dynamic Range: 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB
• D-A Dynamic Range: 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB
• Supported sample rates: 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz

Crosstalk

• Input to Input: Better than 90dB
• Output to Output: Better than 90dB
• Input to Output: Better than 85dB

Input Metering

• Ring LED lit Green Signal present (-24 dBFS)
• Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second

Weight and Dimensions

• Height 45 mm / 1 ¾ “
• Width 175 mm / 7”
• Depth 100 mm / 4”
• Weight 580 g / 1.3 lbs

Softube Time and Tone Bundle

In addition to the Red 2 and Red 3 Plug-in Suite, this interface includes the Softube Time and Tone Pack. This is a unique plug-in bundle, comprised of Softube's world class TSAR-1R reverb, Tube Delay, and Saturation Knob.

TSAR-1R: Add space, depth and width to your sound—TSAR-1R is a reverb plug-in with world class sound and extreme ease of use. With a single slider, you can take TSAR-1R from realistic and three-dimensional rooms to dramatic and dreamlike halls.

Tube Delay: A tasty echo effect that can go from clean to rude by overdriving its three modeled tube stages. Create anything from realistic room echoes to rockabilly style slapbacks—or take it all the way into dub reggae echo madness.

Saturation Knob: Add grit and warmth to any sound source with this modeled output distortion unit. Use it to fatten up bass lines, add some harmonics and shimmer to vocals, or simply destroy your drum loop. Simply turn up the knob to add saturation, and use the three-position switch to alter the distortion character.