Heritage Audio 2264E

80 series Class A diode bridge based compressor/limiter module
MFR# HA2264E
Heritage Audio 2264E
Heritage Audio 2264E Heritage Audio 2264E
$1,972.00
No interest if paid in full within 12 months Learn more
Special Order
Due to the special nature of this item, we order each unit fresh from the factory, exclusively for you! Lead times may vary so please chat, call or email for up-to-date inventory status.
Description

The Heritage Audio 2264E compressor limiter is a diode bridge based dynamics module, engineered to be used in vintage 80 Series consoles. It can also be installed in the Heritage Audio Frame 8 and Rack 2, where there is provision for linking up to 8 units in 2 different buses. It is fully Class A, including the same output stage found in the HA1073, which reacts in a much nicer way to compression than class A/B amplifiers. It is completely handmade and wired in the same fashion as the rest of the Heritage Audio 80 Series modules.

Features:

  • Gain Reduction meter: Shows the compression amount up to 20 dB
  • Limit switch: Enables limit function
  • Compress switch: Enables compression and gain makeup functions
  • Limit recovery switch: Switches between 6 time constant options; 50ms, 100ms, 200ms, 800ms, Auto1 (100ms on peaks, 2secs on program material) and Auto2 ( 50ms on peaks, 5secs on program)
  • Limit Level Stepped control: Sets the level at what limit begins, from +15 dBm down to +4 dBm in 0.5 dB steps)
  • Compress recovery switch: Switches between 6 time constant options; 100ms, 400ms, 800ms, 1500ms, Auto1 (100ms on peaks, 2secs on program material) and Auto2 (50ms on peaks, 5secs on program)
  • Compress Threshold Stepped control: Sets the minimum level at what compression happens, from +10 dBm down to -20 dBm in 2 dB steps)
  • Compress Ratio Switch: Allows the user to choose between 5 different compression ratios, 1.5, 2, 3, 4and 6:1
  • Gain Makeup Stepped control: In 2 dB steps from 0 to 20 dB
  • Bypass switch: Switches the module in/out of the signal path
  • IND switch: Allows the module to be linked to Buss A, Buss B, or independen.

Specifications:

  • Line input impedance: 10 kOhms bridging, transformer balanced and
  • floating.
  • Output impedance: Less than 75 Ohms, transformer balanced and floating, to drive a load of 600 Ohms.
  • Maximum output: Greater than +26 dBm into 600 Ohms, greater than
  • +32dBu into 10 kOhms
  • THD: Less than 0.025% at 1 khz, less than 0.05% at 100 Hz
  • Frequency response: 20 Hz (+0.3dB) to 20 khz (-0.2 dB)
  • Maximum Gain: 20 dB
  • Noise: Less than -90 dBm when gain makeup set to 0 dB
  • Power consumption: 112 mA @24 VDC
Specs

Additional Information

Condition New
Channels Single-Channel
Reviews

Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register.

Testimonials
Blog Posts

Have some questions about this item?

When it comes to getting the best gear, your tastes are probably pretty particular. Vintage King can help answer any and every question to help you make the right decisions for your sound. Fill out the form below and we'll be in contact with you shortly.

Free Shipping in the USA and 50% Off International Shipping! See terms.

* Required Fields