Genelec Speaker System w/ 1034b Pair and 7073 Sub (Used)

The Genelec 1038B is a three-way active monitoring system including loudspeaker drivers, speaker enclosure, multiple power amplifiers and active, low signal level crossovers. Designed for medium sized control rooms this system is ideal for music recording studios, project studios, film and video post-production and broadcast monitoring. Mastering suites are also tailored for, where broad bandwidth, high SPL's and extended low frequency response are essential. The 1038B is designed to perform well both as a free-standing monitor and flush mounted into the control room wall.

The unique Directivity Control Waveguide ™ (DCW ™) Technology used provides excellent stereo imaging and frequency balance even in difficult acoustic environments. Versatile crossover controls allow for precise matching of the speaker system to different acoustic conditions. The system can be used both in vertical and horizontal orientation by simply rotating the DCW unit.

The system is very easy to use as only mains power and input signal are needed. All drivers are magnetically shielded as standard to minimize stray magnetidc field.

A rack mount adapter is available so that the amplifier section can be positioned separately from the cabinet when soffit mounting. This allows for better & easier amplifier cooling and easier access to the Tone Control DIP switches during in-room system calibration.

The Genelec 7073A active subwoofer is a powerful and precise bass reproduction tool for large Surround Sound or Stereo installations. Its 19 Hz lower cut-off frequency and 124 dB sound pressure output capability are sufficient to handle the most demanding high SPL applications. All electronics are integrated into the subwoofer cabinet: active crossover filters, driver overload protection circuits and power amplifiers.

The built-in bass management unit has six signal input and output channels (L/C/R Front and L/C/R Rear), LFE input and summed signal output connectors, providing great flexibility and easy connection. The discrete LFE signal input is equipped with a selectable 85/120 Hz low-pass filter and a 0/+10 dB LFE sensitivity switch.

The amplifiers on the 7073A produce a total of 1000 W of short term RMS power for four 305 mm (12") cone drivers. Driver overload protection and power-on signal muting are included in the amplifier circuitry.