Gefell M 200 - Satin Nickel Finish

Studio condenser microphone
MFR# 211116
Gefell M 200 - Satin Nickel Finish

$1,118.17

$954.85
No interest if paid in full within 12 months Learn more
Special Order
Due to the special nature of this item, we order each unit fresh from the factory, exclusively for you! Lead times may vary so please chat, call or email for up-to-date inventory status.
Description

At first glance, the Gefell M200 looks like a typical pencil microphone.  But upon closer inspection, one immediately notices the incomparable fit and finish that comes with hand-made precision of German engineering.  The sleek nickel-satin finish, combined with the sculpted control zone is clearly at another level.

As a modular system, each of the three microphone capsules may be separated from preamplifier. Inside the capsule housing is the M3 capsule, a hand-stretched 12.5mm (1/2”) 24-karat gold evaporated membrane with hand-machined back-plate.  The M200’s smaller capsule has the distinct advantage of less diaphragm distortion for a more natural and uncolored response.

The use of a rugged ‘space-age’ ceramic housing assures stability and improves linear response as effects from temperature fluctuations are minimized.  Ceramics have long been known for their ability to withstand heat or cold without the expansion and contraction associated with metals.  This of course is a concern when attempting to maintain a precise gap between the membrane and the charged back plate.

To control ballistics and ensure a smooth axial response, the capsule top and side grills are actually made up of five separate meshes.  The capsule housing is then mounted on a pedestal that simultaneously deflects unwanted body reflections away from the capsule while assuring a precise polar pattern is maintained.  The careful control of phase cancellation benefits the M200 with both a more detailed and articulate rendering, while reducing unwanted noise from entering the capsule.

The microphone capsule amplifier employs a newly developed hybrid circuit topology.  This features a transformerless, symmetrical output stage that yields both a very low self-noise and better than 148dB pressure handing.

On-board controls include a low-frequency roll-off that gently reduces rumble or run-away acoustic resonance in live settings.  A 10dB pre-attenuation pad is used when extreme sound pressure levels are encountered.

Features:

  • Modular mic system
  • Choice of three patterns
  • Low noise output stage
  • 16mm gold diaphragm

Specifications:

  • Pattern: cardioid
  • Frequency response: 40 Hz - 20 kHz
  • Sensitivity: 13 mV/Pa
  • Self noise: 16 dB A-weighted
  • Signal to noise: 80 dB A-weighted
  • Maximum SPL: 145 dB A-weighted
  • Dynamic range: 121 dB
  • Power requirement: 48V phantom

Optional Accessories:

  • Shock mount: EA20
  • Swivel adaptor: MH64
  • Windscreen: W20
  • Pop screen: PO70
  • Power supply: N200 Dual 48V
Specs

Additional Information

Condition New
Transducer Type Condenser
Polar Pattern Cardioid
Number of Microphones Single Microphone
Phantom Required Yes
Frequency Range 40 Hz - 20 kHz
Sensitivity -37.7 dBV/Pa (13 mV)
Max. SPL 145 dB (A-weighted)
Reviews

Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register.

Testimonials
Blog Posts

Have some questions about this item?

When it comes to getting the best gear, your tastes are probably pretty particular. Vintage King can help answer any and every question to help you make the right decisions for your sound. Fill out the form below and we'll be in contact with you shortly.

Free Shipping in the USA and 50% Off International Shipping! See terms.

* Required Fields