Dynaudio BM 12A - Pair – No Longer Available

The Dynaudio BM 12 A is a two-way active analog monitor with an 8 in. woofer and 1.1 in. soft dome tweeter featuring proprietary Dynaudio Acoustics neodymium driver technology.  This model includes switchable EQ contour filters for optimizing speaker placement, as well as high-pass filters for use with subwoofers, like Dynaudio Acoustics BM14S.

Features:

• Two-way full analog active nearfield monitor -- 8 in. neodymium magnet woofer and 1.1 in. soft dome neodymium tweeter
• Neodymium 8 in. woofer
• Neodymium soft dome tweeter
• Integrated positioning filters (LF/MF/HF shelving/notch)
• 60/80Hz high-pass filter for subwoofer adaptation
• Balanced analog XLR input
• 50W/100W tweeter/woofer amplifier
• Input sensitivity switch (-10/+4dB range)
• Clip indicator LED
• Slow attack optical HF protection
• Thermal amplifier protection

Specifications:

• System: two-way active nearfield monitor
• Frequency response (+/- 3 dB): 38 Hz - 21 kHz
• Max SPL 1m, pair (IEC short term): 123 dB RMS
• Max SPL 2m, 5.1 (IEC short term): 124.5 dB RMS
• Input level for 85 dB SPL @1m (+4/-10): -18dBu RMS @ 0dB setting
• Input level for max peak SPL (+4/-10): +12dBu RMS @ 0dB setting
• Power consumption: idle: 15 W / Max: 130 W
• Amplifier power: tweeter: 50 W / Woofer: 100 W
• Resonance frequency: 40 Hz
• Internal cabinet volume: 13.6 liters
• Bass principle: bass reflex
• Crossover frequencies: 1500 Hz
• Crossover slope: 6 dB/oct
• Tweeter: esotec 28 mm/1.1” soft dome, rear chamber, neodymium magnetic. 4 mm die-cast alu front, pure alu wire voice coil
• Woofer: 200 mm/8” Neodymium, one-piece molded poly-prop cone, 75 mm/3” kapton voice coil
• Weight: 12.1 kg / 26.6 lbs
• Dimensions (W x H x D): 234 x 370 x 327 mm / 9.2” x 14.6” x 12.9”