Dynaudio BM12 mkIII

The Dynaudio BM12 mkIII expands on the legacy of the classic BM12A design. Re-voiced around Dynaudio's next generation waveguide, the BM12 mkIII has been designed around highly efficient hand-crafted neodymium drivers, providing faithful transient response and an SPL of 123 dB for larger listening environments.

Double neodymium magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. Aluminum voice coil former and wire are low mass so transient response is quick and accurate. Diaphragm and dust cap are moulded as one piece in patented low-mass, highly rigid Magnesium Silicate providing unrivaled accuracy.

Features

• 100W LF and 50W HF Class AB amplifier
• Extended excursion 8" woofer with pure aluminum voice coil
• 1.1" soft dome tweeter with pure aluminum voice coil
• 123dB SPL peak power output
• Frequency response of 38Hz-21kHz
• HF, MF, LF analog room filters allow flexible positioning
• High pass filters at 60/80Hz for perfect subwoofer adaption
• Input sensitivity switch (-10/+4dB range)

Specifications

• System: Two-way Active Nearfield Monitor
• Frequency Response (+/- 3 dB): 38Hz - 21kHz
• Input level for 85 dB SPL @1m: 123 dB
• Power consumption: Idle: 15 W / Max: 130 W
• Amplifier power: Tweeter: 50 W / Woofer: 100 W
• Resonance Frequency: 40 Hz
• Bass Principle: Bass reflex
• Crossover Frequencies: 1500 Hz
• Crossover Slope: 6 dB/oct
• Tweeter: Esotec 28 mm/1.1“ soft dome, Rear chamber, Magnetic fluid, 4 mm alu front, Pure alu wire voice coil
• Woofer: 200 mm/8”, One-piece molded poly-prop cone, 75 mm/3” kapton voice coil, Neodymium magnet
• Weight: 12.5 kg / 27.5 lbs
• Dimensions (W x H x D): 234 x 369 x 328 mm / 9.2” x 14.6” x 12.9”