Dynaudio Air 25 Slave - Single

The Dynaudio Air 25 offers transparency, consistent speaker performance and outstanding possibilities for optimizing performance in different acoustical environments.  Operating at a staggering sample rate of 192 kHz supported via Dual Wire, the integration with DAWs is seamless.  A digital output can be fed directly into the AIR 25 supporting 2.1, 5.1, 6.1 and 5.3 setups.  The AIR 25 is developed for both stereo and multi-channel monitoring in demanding production environments including:

• Post production
• Music recording and mixing
• Film editing
• DVD authoring and mastering
• 5.1 Production (audio or audio for pictures)
• Broadcast
• Edit suites

The AIR 25 monitor is the second three-way design from Dynaudio Acoustics integrating the AIR technology.  Combining brand new Dynaudio 221 (two-to-one) technology with cutting-edge digital TC technology, the AIR 25 defines new standards for performance and precision in three-way powered monitors.  With the massive power that this monitor packs - a stunning 4x300-watt amp package - most demanding applications will be dealt with like a breeze.

Features:

• 2x10" woofer, one 5.5" midrange and one 1.1 soft dome tweeter
• 192 kHz support via Dual Wire
• Advanced bass management, with selectable frequency crossover points
• Acoustic placement compensation
• Preset storage and recall
• Programmable reference levels
• Level alignment in 0,1dB steps
• +/- 0.2dB precision alignment
• Integrated parametric EQ's and delay in each monitor (PC-IP only)
• Central and remote control of system and parameters
• Direct digital inputs and analog inputs (optional)
• Networking in-between all AIR components
• 221 (two-to-one) design - integrating unique tweeter and midrange technology
• Four times 300-watt amp package

Specifications:

• System: three-way active nearfield monitor
• Frequency response (+/- 3 dB): 28 Hz –22 kHz: +/- 3 dB
• Peak SPL 1m, pair (IEC short term): 134 dB peak
• Peak SPL 2m, 5.1 (IEC short term): 132 dB peak
• Max SPL 1m, (IEC long term): 107 dB RMS
• Precision of monitor matching: +/- 0.2 dB
• Port tuning frequency: 35 Hz
• Internal cabinet volume: 68 litres
• Bass principle: bass reflex
• Crossover frequency: 400 Hz (DSP generated) and 2400 Hz (DSP generated)
• Crossover slope: 12/6 dB/Oct, 12/6 dB/Oct
• Tweeter: Esotar 28 mm / 1.1” soft dome, neodymium magnet, rear chamber
• Midrange: 145 mm / 5,5", one-piece molded polypropylene cone, 38 mm 
• Woofer: 2x240 mm / 9,5", one-piece molded polypropylene cone, 100
• Mains voltage: 100 to 240 VAC, 50 to 60 Hz (select)
• Power consumption: 45 W @ 1/8 max power (IEC 60065)
• Amp: black painted back plate
• Cabinet: black ash with dark gray MDF baffle
• Dimensions (H x W x D): 510 x 535 x 450 mm /20” x 21” x 17,7”
• Depth incl. amp and driver: 490mm / 19,3”
• Weight: 46 kg / 101 lbs
• Tweeter, midrange and woofer: tweeter 300 W amp/midrange 300 W amp/woofer 2x300 W amp
• Typical room size: 80-150m3 / 2800-5200 ft3
• Internal sample rate: 192 and 176.4 via dual wire (optional digital card required) and 96, 88.2, 64, 48, 44.1 or 32 kHz
• I/O connectors: XLR (2 channels AES/EBU in) 3 x RJ 45 proprietary TC Link
• Formats: AES/EBU (24 bit)
• Word clock input: BNC, 75ohm, 0.6-10 Vpp
• Display: 2 x 16 character dot matrix
• Operation: menu system / four buttons
• Input connectors: XLR balanced (pin 2+, pin 3-)
• Impedance: 10/3 k ohm (balanced/unbalanced)
• Selectable full scale input level: +9, +15, +21, +27 dBu
• Dynamic range: > 113 dB typ. (unweighted), BW: 20-20 kHz
• THD+N: < -105 dB typ. @ 1 kHz, -3 dBFS
• Crosstalk: < -120 dB, 20 Hz to 20 kHz
• A to D conversion: 24 bit (dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)
• I/O connectors: 2 x RJ45 proprietary TC-Link
• Complies with: EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B
• Certified to: IEC 60065, EN 60065, UL 6500 and CSA E60065 CSA FILE #LR108093
• Operating temperature: 32° F to 122° F (0° C to 50° C)
• Storage temperature: -22° F to 167° F (-30° C to 70° C)
• Humidity: Max. 90 % non-condensing