Dynaudio Air 12 Master D6 - Single – No Longer Available

The Dynaudio Air 12 suits all sizes of control rooms and OB vans and its high precision amp/driver system (+/- 0.2dB accuracy) ensures complete consistency with the entire AIR family in a variety of stereo and 5.1 setups – remote controllable via the AIR Remote or the included Air Soft application.

DSP room adaption allows for perfect customization for any room construction and its inter-monitor level calibration feature ensures consistent levels in all sessions.

Features:

• 8" woofer and 1.1 soft dome tweeter
• 192 kHz support via dual wire
• Advanced bass management with selectable frequency crossover points
• Acoustic placement compensation
• Preset storage and recall
• Level alignment in 0,1 dB steps
• All monitors aligned within +/- 0.2 dB precision
• Integrated parametric EQ’s and delay in each monitor (only accessible with PC-IP)
• Central and remote control of system and parameters
• Direct digital inputs and analog inputs (optional)
• Networking in-between all AIR components
• Dedicated AIR Base subwoofers
• 200 watt amp on both woofer and tweeter

Specifications:

• System: two-way active nearfield monitor
• Frequency response: (+/- 3 dB) 37 Hz – 22 kHz
• Peak SPL 1m, pair (IEC short term) > 128 dB peak
• Peak SPL 2m, 5.1 (IEC short term) > 126 dB peak (no LFE )
• Max SPL 1m, (IEC long term)
• Precision of monitor matching +/- 0.2 dB
• Port tuning frequency: 41 Hz
• Internal cabinet volume: 18 liter
• Bass principle: bass reflex
• Crossover frequency: 2100 Hz
• Crossover slope: 6 dB/oct
• Tweeter esotec: 28 mm / 1.1” soft dome, rear chamber, magnetic fluid, 4mm alu front, pure alu wire voice coil
• Woofer: 200 mm / 8”.  Die-cast basket.  One piece moulded polyprop cone 75mm / 3” pure aluminum voice coil
• Mains voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
• Power consumtion: 40 W @ 1/8 max power (IEC 60065)
• Amp: black anodized aluminum back plate
• Cabinet: dark gray MDF baffle, silver foil
• Dimensions (W x H x D): 385 x 238 x 378mm
• Weight 12,9 kg
• Tweeter and woofer Tweeter 200 W amp/Woofer 200 W amp
• Typical listening distance 1.5-2.0 m / 5-8,5 ft
• Typical room size 75-125 m3 / 2600-4400 ft3
• Internal sample rate 192 and 176.4 via Dual Wire (optional Digital Card required) and 96, 88.2, 64, 48, 44.1 or 32 kHz
• I/O Connectors XLR (2 channels AES/EBU in) 3 x RJ 45 proprietary TC Link
• Formats AES/EBU (24 bit)
• Word clock input BNC, 75ohm, 0.6-10 Vpp
• Display 2 x 16 character dot matrix
• Operation Menu system / Four buttons
• Analog Input options -
• Input connectors XLR balanced (pin 2+, pin 3-)
• Impedance 10/3 k ohm (Balanced/unbalanced)
• Selectable Full scale Input level +9, +15, +21, +27 dBu
• Dynamic range > 113 dB typ. (unweighted), BW: 20-20 kHz
• THD+N < -105 dB typ. @ 1 kHz, -3 dBFS
• Crosstalk < -120 dB, 20 Hz to 20 kHz
• A to D Conversion 24 bit (Dual bit delta sigma sampling at 4.1/5.6/6.1/6.1 MHz)
• I/O Connectors 2 x RJ45 proprietary TC-Link
• Complies with EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B
• Certified to IEC 60065, EN 60065, UL 6500 and CSA E60065 CSA FILE #LR108093
• Operating temperature 32° F to 122° F (0° C to 50° C)
• Storage temperature -22° F to 167° F (-30° C to 70° C)
• Humidity Max. 90 % non-condensing