0% up to 48 Months on over 110 Brands!
New & Current Vintage King Card Holders
0% financing up to 48 Months on over 110 Brands!
When you shop now with your Vintage King Credit Card.
The DPA d:screet CORE 6061 is a subminiature microphone with a cable terminated with a hardwired 3-pin Lemo connector. Although it's just 3 mm (0.12 in) in size, it pacls the audio power of DPA's larger, award-winning DPA mics. What it lacks in size, it more than makes up for in clarity, consistency and durability – three qualities that really matter. By shrinking CORE by DPA technology, DPA ensure you don't have to compromise on sound to focus on aesthetics. CORE by DPA is a powerful new technology at the heart of DPA miniature microphones. With minimized distortion you will experience increased clarity and openness.
DPA have taken the amazing CORE technology and shrunk it down to fit into their (0.12 in) subminiature mics. This means that, despite their small size, the performance of the d:screet 6061 CORE Subminiature Series is fully comparable to the 5 mm (0.20 in) miniature capsules that are beloved around the globe. These subminiatures have a lower noise floor than any other 3 mm (0.12 in) capsule on the market and they are better able to capture high sound pressure levels without distortion as well. In terms of technical specifications, the d:screet 6061 has a noise floor of only 26 dB(A), which is on par with the 5 mm (0.20 in) DPA miniature capsules.
This tiny capsule has a cap that can be removed for cleaning and should be firmly reattached to the mic body with a firm click that can both be felt and heard. The supplied cap corresponds in its nature to the low-boost grid 5 mm (0.20 in) versions. Both the mic itself plus the cap are made of stainless steel and treated with a Physical vapor deposition (PVD) coating that makes it extremely durable: able to tolerate high temperatures, resilient against impacts and resistant to abrasion. The entire mic has a pleasant matte look due to the coating making the entire headset look smaller and less obtrusive.
The cable is often the weak spot on these types of mics, but we have opted to use the same size cable (Ø 1.6 mm (.06 in)) and the same rugged cable relief as on our 5 mm (0.20 in) mics. The cables are extremely durable, do not become entangled and are equipped with an inner core made of Kevlar that withstands rough pulls. A strain relief is integrated in the mic housing to strengthen the assembly.
The cable and capsule design ensure immunity to noisy wireless devices. These mics are typically connected to a wireless belt pack and DPA offer a comprehensive mix of adapters to suit the many wireless transmitters available. When used with an adapter, the connector is our MicroDot but we also offer hardwired terminations to suit the most popular systems from manufactures such as Shure and Sennheiser. All DPA connectors are equipped with a rugged strain relief.
The CORE Subminiatures are IP58 certified. This durability is achieved through a number of defense mechanisms:
When used as a lavalier, a special rotatable clip is available. The 360° clip allows the lav to be mounted in eight positions, chosen in 45° incremental steps. This makes it very easy to change from women's to men's shirts (left to right buttoned) or even t-shirts and the like where the neckline is used.
|Tube or Solid State||Solid State|
|Number of Microphones||Single Microphone|
|Frequency Range||20 Hz - 20 kHz|
|Sensitivity||-44 dBV/Pa (6 mV)|
|Max. SPL||144 dB|
When it comes to getting the best gear, your tastes are probably pretty particular. Vintage King can help answer any and every question to help you make the right decisions for your sound. Fill out the form below and we'll be in contact with you shortly.
Free shipping to the lower 48 US states on orders $99 and up. See details.
* Required Fields
Please fill out the form below and a Vintage King Audio Consultant will contact you with a ship date for the DPA CORE 6061 Subminiature Mic for Loud SPL with 3 pin LEMO Connector - Black.