{"title":"STG Soundlabs","description":null,"products":[{"product_id":"stg-soundlabs-trigger-sequencer-16-stage-trigger-sequencer","title":"STG Soundlabs Trigger Sequencer 16-Stage Trigger Sequencer","description":"\u003cp\u003eThe \u003cstrong\u003eSTG Trigger Sequencer\u003c\/strong\u003e is a microprocessor-controlled sixteen-stage trigger sequencer. Stage status (on\/off) is controlled by a slide switch, and current stage indication is provided by eight green LEDS and two yellow LEDS in a row\/column configuration. Stages one through eight are on the left column, and stages two through sixteen are in the right column. The real power of this module, like the graphic sequencer, is that multiple units can be linked internally to the time buffer module which allows them all to be controlled (rate and restart) from a master sequencer or drum machine via the “din sync” connection.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cp\u003eStages – These slide switches control wether the stage sends a trigger or not. The duty cycle of the stage is 50 percent when advanced by the clock bus or the duty cycle of the incoming clock applied to the shift input.\u003c\/p\u003e  \u003cp\u003eLength – This rotary switch controls how long the sequence is from two to sixteen stages. When a change is made at this control, it does not become active until the next cycle, which is very useful in a live context to allow more dynamic planning.\u003c\/p\u003e  \u003cp\u003eDivisions Switch – This switch is only active when the unit is connected to master sync via the time buffer. It allows you to select between quarter, eighth, and sixteenth-note rate for the sequencer. Any time the rate is changed, the change will not take effect until the unit returns to stage one. This allows you to better keep track of where the sequencer will land in a live performance context.\u003c\/p\u003e  \u003cp\u003eStop\/Loop at End Switch – This controls wether the sequencer stops at the last stage set by the length control or wether it returns to stage one and continues to advance from there. This could be used to either end phrases at certain times or use the sequencer as a burst generator for either rhythmic effects or handclaps.\u003c\/p\u003e  \u003ch3\u003eConnections:\u003c\/h3\u003e  \u003cp\u003eShift Input – Gate signals presented at this input advance the stages forward incrementally. a 3.5 mm ts plug connected here tells the internal computer to stop advancing according to the internal sync bus and instead wait for pulses to appear at this connection.\u003c\/p\u003e  \u003cp\u003eStage One Input – gate signals presented at this input return the sequencer to stage one for the duration of the input duty cycle. after the input returns to zero volts, the sequencer will wait for either the next logical clock from the sync bus or the next pulse presented to the shift input.\u003c\/p\u003e  \u003cp\u003eStage One Output – this output presents a 5v pulse when the sequencer is returned to stage one whose duty cycle is either 1\/32nd note in sync bus mode or the duration of the duty cycle of the gate signal driving the sequencer from the shift input.\u003c\/p\u003e  \u003cp\u003eOutput – here is where all of the sequential voltages spew forth from zero to five volts depending on what the sliders are set to.\u003c\/p\u003e  \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eThis module, along with the Time Buffer and the Graphic Sequencer, uses only the five volt power rail of your system. If you do not have five volt power already in your system, a regulator board can be purchased which is strong enough to power 8 of these modules. It also has both Doepfer and Synthesizers.com power connectors to accommodate a variety of power situations.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44449852424295,"sku":"55856","price":181.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-soundlabs-trigger-sequencer_55856_1a_04ad65a9-174d-4128-8b2a-200cab4534fc.jpg?v=1787090697"},{"product_id":"stg-soundlabs-sea-devils-filter-lowpass-filter","title":"STG Soundlabs Sea Devils Filter Lowpass Filter","description":"\u003cp\u003eThe \u003cstrong\u003eSTG Sea Devils Filter\u003c\/strong\u003e is a three pole diode ladder lowpass filter with voltage controlled resonance. There are two famous 3 pole diode ladder lowpass filters, one of them was in a little silver box of a synthesizer with integrated sequencer that was used to make \"Acid Tracks\" and the other one was was in a big suitcase of a synthesizer with a silver faceplate and semi- integrated sequencer that was used to make tracks on acid often. This is the latter.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44449852457063,"sku":"55857","price":250.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-soundlabs-sea-devils_55857_1a_05f149c5-65d1-4606-9405-e83f6eb81600.jpg?v=1787090697"},{"product_id":"stg-soundlabs-mankato-filter-lowpass-filter","title":"STG Soundlabs Mankato Filter Lowpass Filter","description":"\u003cp\u003eThe \u003cstrong\u003eSTG Mankato Filter\u003c\/strong\u003e is a four-pole lowpass filter with positive and negative outputs at every pole, giving you slopes of 6 dB\/oct, 12 dB\/oct, 18 dB\/oct, and 24 dB\/oct simultaneously. The negative slope outputs allow you to use the Mankato as a quadrature sine oscillator with 8 available phases. The Mankato will self-resonate from subaudio to superaudio, and responds to one volt per octave through it's unattenuated control inputs. The signal inputs are DC coupled, which allows you to use the Mankato as a voltage-controlled slew limiter.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44449852489831,"sku":"55858","price":240.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-mankato_55858_1_2f91822a-7eaf-4957-904c-ef7764a9bfc5.jpg?v=1787090697"},{"product_id":"stg-soundlabs-graphic-sequencer","title":"STG Soundlabs Graphic Sequencer","description":"\u003cp\u003eThe \u003cstrong\u003eSTG Graphic Sequencer\u003c\/strong\u003e is unlike other CV sequencers. This microprocessor-controlled graphic sequencer uses illuminated faders to set the step voltages. Sequence length can be adjusted from one to eight and the sequencer can operate either in loop or one shot modes. Red illuminated faders are used for setting the step voltage from 0 to 5V. At clock speeds in audio range you can use the faders t draw waveforms, similar to a graphic oscillator. The length of the sequence can be adjusted fro one to eight steps with a rotary switch. If the sequencer loos or if it plays only once can be set with the \"at end\"-switch. changes won't become active until the next cycle, which is very useful in a live context to allow more dynamic planning. Resetting the sequencer to step 1 is possible by a gate signal at the \"stage 1 input\". The \"stage 1 output\" generates a 5V gate signal when reaching the first step. With the optionally available module Time Buffer you can synchronize up to eight Graphic Sequencers to a DIN Sync signal. The \"division\" switch at the Graphic Sequencer selects if the module runs in quarter, eighth or sixteenth-note rate. Changes of this parameter will not take effect until the unit returns to stage one.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44449852653671,"sku":"55855","price":295.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-graphic-sequencer_55855_1_c6b7f523-0d4b-4769-b0af-2faed603e8a6.jpg?v=1787090697"},{"product_id":"stg-soundlabs-shn-4hp-noise-source-sample-hold-module","title":"STG Soundlabs .SHN","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .SHN\u003c\/strong\u003e packs in a noise source with both pink and white noise and a sample and hold circuit. The noise is normaled to the control input but the normal is disconnected when you plug a cable into the control input.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44449852686439,"sku":"55854","price":105.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-shn_55854_1_39a4ca75-672f-4863-8be5-d623605f08f9.jpg?v=1787090698"},{"product_id":"stg-soundlabs-pri-clock-divider","title":"STG Soundlabs .PRI Clock Divider","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .PRI\u003c\/strong\u003e is a slightly more esoteric and polyrhythmic divider from STG Soundlabs The .PRI offers extended prime division beyond the 3, 5, and 7 values more commonly found, and also available on the STG .DIV. This is a resettable square wave\/gate divider for clock and audio. Reset will hard restart the internal clock with the leading edge of an incoming gate.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44449852751975,"sku":"55851","price":105.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-pri_55851_1_de9fe665-9403-4f39-8f20-d604df11e39d.jpg?v=1787090698"},{"product_id":"stg-soundlabs-mix-3-channel-mixer-module","title":"STG Soundlabs .MIX 3 Channel Mixer Module","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .MIX\u003c\/strong\u003e is a three-channel mixer module. Part of it´s circuitry has been copied from the good old Moog CP3. Audio signals can be distorted easily so the module is well suited for audio signals but also CVs can be mixed with it. Mixer with three inputs and one output. The output attenuator is bi-polar. The .MIX is built without any operation amplifiers and has a transistor based makeup gain stage that can distort the signal quite properly, but still with a nice sound. This stage originates from the vintage Moog CP3 module.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44449852719207,"sku":"55850","price":130.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-mix_55850_1_559569f6-9c0a-4e88-bbfb-ae622ba683eb.jpg?v=1787090698"},{"product_id":"stg-soundlabs-div-clock-divider-module","title":"STG Soundlabs .DIV Clock Divider Module","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .DIV\u003c\/strong\u003e is a clock divider module that divides the frequency of a pulse signal by odd and even values from 1 to 8. It can be reset of course. The .DIV divides by 2, 3, 4, 5, 6, 7 and by 8. All seven divided frequencies are available at individual outputs. The rising edge of a pulse signal at the reset socket will reset the .DIV's counting process.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44449852784743,"sku":"55849","price":105.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-div_55849_1_0bf40a05-a19d-4ae7-a58b-709c0725aec9.jpg?v=1787090698"},{"product_id":"stg-soundlabs-com-comparator-divider-module","title":"STG Soundlabs .COM Comparator \u0026 Divider Module","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .COM\u003c\/strong\u003e module contains comparator and divider circuits, suited for audio signals. They generate square waves out any audio signal and create four types of sub-octaves, PWM is possible as well.\u003c\/p\u003e  \u003cp\u003eThe input signal is being passed thru a comparator that creates square waves. Depending on the position of the threshold control and the according threshold CV the pulse width of the signal changes and we get a pulse width modulation. A number of different sub-octaves is generated from the input as well. Following outputs are available:\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eoutput 1: direct comparator output. 50% pulse width\u003c\/li\u003e \u003cli\u003eoutput 2: one octave below input, 50% pulse width\u003c\/li\u003e \u003cli\u003eoutput 3: direct comparator output. 1%-49% pulse width\u003c\/li\u003e \u003cli\u003eoutput 4: two octaves below input, 50% pulse width\u003c\/li\u003e \u003cli\u003eoutput 5: one octave below input, 25% pulse width\u003c\/li\u003e \u003c\/ul\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44449852817511,"sku":"55853","price":110.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-com_55853_1_050676d6-41be-4eae-8d47-32bfd3ff43c5.jpg?v=1787090698"},{"product_id":"stg-soundlabs-bin-divider-featuring-clock","title":"STG Soundlabs .BIN Divider Featuring Clock","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .BIN\u003c\/strong\u003e is a resettable powers of two divider circuit for clock and audio, which requires a square wave\/gate input. Reset will hard restart the internal clock with the leading edge of an incoming gate. Divide incoming square wave\/ gate signal by 2, 4, 8, 16, 32, 64, 128.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44449852850279,"sku":"55852","price":160.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-bin_55852_1_d434592f-b550-43b6-839d-59139f667299.jpg?v=1787090699"},{"product_id":"stg-soundlabs-bam-bipolar-attenuator-eurorack","title":"STG Soundlabs .BAM Bipolar Attenuator Eurorack","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .BAM\u003c\/strong\u003e is a 4hp utility module. The name stands for Buffered Attenuated Multiple. The module can be thought of as two components: a bipolar attenuator with a 2:1 gain ratio on the top, and a 1 in 4 out multiple on the bottom. The attenuator output is normalled to the multiple. The connection is broken by plugging into the multiple input.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44449852883047,"sku":"55848","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-bam_55848_1_2c0be89a-e80b-4c31-94b9-3a8aae770695.jpg?v=1787090698"},{"product_id":"stg-soundlabs-mix-3-channel-mixer-module-demo-deal","title":"STG Soundlabs .MIX 3 Channel Mixer Module (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .MIX\u003c\/strong\u003e is a three-channel mixer module. Part of it´s circuitry has been copied from the good old Moog CP3. Audio signals can be distorted easily so the module is well suited for audio signals but also CVs can be mixed with it. Mixer with three inputs and one output. The output attenuator is bi-polar. The .MIX is built without any operation amplifiers and has a transistor based makeup gain stage that can distort the signal quite properly, but still with a nice sound. This stage originates from the vintage Moog CP3 module.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44450281390183,"sku":"101225","price":104.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-mix_55850_1_1_e8cf631a-eaf7-4492-a988-7f6b56346e89.jpg?v=1787092440"},{"product_id":"stg-soundlabs-mankato-filter-lowpass-filter-demo-deal","title":"STG Soundlabs Mankato Filter Lowpass Filter (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eSTG Mankato Filter\u003c\/strong\u003e is a four-pole lowpass filter with positive and negative outputs at every pole, giving you slopes of 6 dB\/oct, 12 dB\/oct, 18 dB\/oct, and 24 dB\/oct simultaneously. The negative slope outputs allow you to use the Mankato as a quadrature sine oscillator with 8 available phases. The Mankato will self-resonate from subaudio to superaudio, and responds to one volt per octave through it's unattenuated control inputs. The signal inputs are DC coupled, which allows you to use the Mankato as a voltage-controlled slew limiter.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44450461581415,"sku":"123508","price":269.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-mankato_55858_1_1_39f090ad-a420-423c-8573-832ff0e7625b.jpg?v=1787093154"},{"product_id":"stg-soundlabs-trigger-sequencer-16-stage-demo-deal","title":"STG Soundlabs Trigger Sequencer 16-Stage (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eSTG Trigger Sequencer\u003c\/strong\u003e is a microprocessor-controlled sixteen-stage trigger sequencer. Stage status (on\/off) is controlled by a slide switch, and current stage indication is provided by eight green LEDS and two yellow LEDS in a row\/column configuration. Stages one through eight are on the left column, and stages two through sixteen are in the right column. The real power of this module, like the graphic sequencer, is that multiple units can be linked internally to the time buffer module which allows them all to be controlled (rate and restart) from a master sequencer or drum machine via the “din sync” connection.\u003c\/p\u003e  \u003ch3\u003eControls:\u003c\/h3\u003e  \u003cp\u003eStages – These slide switches control wether the stage sends a trigger or not. The duty cycle of the stage is 50 percent when advanced by the clock bus or the duty cycle of the incoming clock applied to the shift input.\u003c\/p\u003e  \u003cp\u003eLength – This rotary switch controls how long the sequence is from two to sixteen stages. When a change is made at this control, it does not become active until the next cycle, which is very useful in a live context to allow more dynamic planning.\u003c\/p\u003e  \u003cp\u003eDivisions Switch – This switch is only active when the unit is connected to master sync via the time buffer. It allows you to select between quarter, eighth, and sixteenth-note rate for the sequencer. Any time the rate is changed, the change will not take effect until the unit returns to stage one. This allows you to better keep track of where the sequencer will land in a live performance context.\u003c\/p\u003e  \u003cp\u003eStop\/Loop at End Switch – This controls wether the sequencer stops at the last stage set by the length control or wether it returns to stage one and continues to advance from there. This could be used to either end phrases at certain times or use the sequencer as a burst generator for either rhythmic effects or handclaps.\u003c\/p\u003e  \u003ch3\u003eConnections:\u003c\/h3\u003e  \u003cp\u003eShift Input – Gate signals presented at this input advance the stages forward incrementally. a 3.5 mm ts plug connected here tells the internal computer to stop advancing according to the internal sync bus and instead wait for pulses to appear at this connection.\u003c\/p\u003e  \u003cp\u003eStage One Input – gate signals presented at this input return the sequencer to stage one for the duration of the input duty cycle. after the input returns to zero volts, the sequencer will wait for either the next logical clock from the sync bus or the next pulse presented to the shift input.\u003c\/p\u003e  \u003cp\u003eStage One Output – this output presents a 5v pulse when the sequencer is returned to stage one whose duty cycle is either 1\/32nd note in sync bus mode or the duration of the duty cycle of the gate signal driving the sequencer from the shift input.\u003c\/p\u003e  \u003cp\u003eOutput – here is where all of the sequential voltages spew forth from zero to five volts depending on what the sliders are set to.\u003c\/p\u003e  \u003ch3\u003ePower:\u003c\/h3\u003e  \u003cp\u003eThis module, along with the Time Buffer and the Graphic Sequencer, uses only the five volt power rail of your system. If you do not have five volt power already in your system, a regulator board can be purchased which is strong enough to power 8 of these modules. It also has both Doepfer and Synthesizers.com power connectors to accommodate a variety of power situations.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44450481078375,"sku":"125378","price":249.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-soundlabs-trigger-sequencer_55856_1a_1_e5aac4fc-d4b8-4c36-b7d6-48d61cb3bb6b.jpg?v=1787093238"},{"product_id":"stg-soundlabs-com-comparator-divider-module-demo-deal","title":"STG Soundlabs .COM Comparator \u0026 Divider Module (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .COM\u003c\/strong\u003e module contains comparator and divider circuits, suited for audio signals. They generate square waves out any audio signal and create four types of sub-octaves, PWM is possible as well.\u003c\/p\u003e  \u003cp\u003eThe input signal is being passed thru a comparator that creates square waves. Depending on the position of the threshold control and the according threshold CV the pulse width of the signal changes and we get a pulse width modulation. A number of different sub-octaves is generated from the input as well. Following outputs are available:\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eoutput 1: direct comparator output. 50% pulse width\u003c\/li\u003e \u003cli\u003eoutput 2: one octave below input, 50% pulse width\u003c\/li\u003e \u003cli\u003eoutput 3: direct comparator output. 1%-49% pulse width\u003c\/li\u003e \u003cli\u003eoutput 4: two octaves below input, 50% pulse width\u003c\/li\u003e \u003cli\u003eoutput 5: one octave below input, 25% pulse width\u003c\/li\u003e \u003c\/ul\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44450481340519,"sku":"125324","price":104.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-com_55853_1_1_358ebb8d-8ca7-4497-8b83-abfdd35e35d9.jpg?v=1787093239"},{"product_id":"stg-soundlabs-bam-bipolar-attenuator-eurorack-demo-deal","title":"STG Soundlabs .BAM Bipolar Attenuator Eurorack (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .BAM\u003c\/strong\u003e is a 4hp utility module. The name stands for Buffered Attenuated Multiple. The module can be thought of as two components: a bipolar attenuator with a 2:1 gain ratio on the top, and a 1 in 4 out multiple on the bottom. The attenuator output is normalled to the multiple. The connection is broken by plugging into the multiple input.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44450481373287,"sku":"125323","price":58.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-bam_55848_1_1_7f88f6be-69c5-4328-a840-f3f68e640a50.jpg?v=1787093239"},{"product_id":"stg-soundlabs-bin-divider-featuring-clock-demo-deal","title":"STG Soundlabs .BIN Divider Featuring Clock (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .BIN\u003c\/strong\u003e is a resettable powers of two divider circuit for clock and audio, which requires a square wave\/gate input. Reset will hard restart the internal clock with the leading edge of an incoming gate. Divide incoming square wave\/ gate signal by 2, 4, 8, 16, 32, 64, 128.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44450481569895,"sku":"125316","price":119.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-bin_55852_1_1_b42cf8f6-701d-4568-8f0a-3d87a399995e.jpg?v=1787093240"},{"product_id":"stg-soundlabs-div-clock-divider-module-demo-deal","title":"STG Soundlabs .DIV Clock Divider Module (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .DIV\u003c\/strong\u003e is a clock divider module that divides the frequency of a pulse signal by odd and even values from 1 to 8. It can be reset of course. The .DIV divides by 2, 3, 4, 5, 6, 7 and by 8. All seven divided frequencies are available at individual outputs. The rising edge of a pulse signal at the reset socket will reset the .DIV's counting process.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44450481668199,"sku":"125312","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-div_55849_1_1_74e7acf1-c410-4fab-b0d0-b83ab78da767.jpg?v=1787093240"},{"product_id":"stg-soundlabs-pri-clock-divider-demo-deal","title":"STG Soundlabs .PRI Clock Divider (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .PRI\u003c\/strong\u003e is a slightly more esoteric and polyrhythmic divider from STG Soundlabs The .PRI offers extended prime division beyond the 3, 5, and 7 values more commonly found, and also available on the STG .DIV. This is a resettable square wave\/gate divider for clock and audio. Reset will hard restart the internal clock with the leading edge of an incoming gate.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44450481864807,"sku":"125304","price":94.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-pri_55851_1_1_79a7765c-90e9-4cd0-83cd-05a9b6c823ab.jpg?v=1787093241"},{"product_id":"stg-soundlabs-graphic-sequencer-demo-deal","title":"STG Soundlabs Graphic Sequencer (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eSTG Graphic Sequencer\u003c\/strong\u003e is unlike other CV sequencers. This microprocessor-controlled graphic sequencer uses illuminated faders to set the step voltages. Sequence length can be adjusted from one to eight and the sequencer can operate either in loop or one shot modes. Red illuminated faders are used for setting the step voltage from 0 to 5V. At clock speeds in audio range you can use the faders t draw waveforms, similar to a graphic oscillator. The length of the sequence can be adjusted fro one to eight steps with a rotary switch. If the sequencer loos or if it plays only once can be set with the \"at end\"-switch. changes won't become active until the next cycle, which is very useful in a live context to allow more dynamic planning. Resetting the sequencer to step 1 is possible by a gate signal at the \"stage 1 input\". The \"stage 1 output\" generates a 5V gate signal when reaching the first step. With the optionally available module Time Buffer you can synchronize up to eight Graphic Sequencers to a DIN Sync signal. The \"division\" switch at the Graphic Sequencer selects if the module runs in quarter, eighth or sixteenth-note rate. Changes of this parameter will not take effect until the unit returns to stage one.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44450481995879,"sku":"125300","price":173.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-graphic-sequencer_55855_1_1_3b501c7a-bc72-4fa3-834e-c646d0957a56.jpg?v=1787093241"},{"product_id":"stg-soundlabs-shn-demo-deal","title":"STG Soundlabs .SHN (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eSTG .SHN\u003c\/strong\u003e packs in a noise source with both pink and white noise and a sample and hold circuit. The noise is normaled to the control input but the normal is disconnected when you plug a cable into the control input.\u003c\/p\u003e","brand":"STG Soundlabs","offers":[{"title":"Default Title","offer_id":44450482946151,"sku":"125283","price":94.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/stg-shn_55854_1_1_9bd42999-c798-43d5-a243-254cd59155c1.jpg?v=1787093246"}],"url":"https:\/\/vintageking.com\/collections\/stg-soundlabs.oembed","provider":"Vintage King","version":"1.0","type":"link"}