{"title":"Live Sound Monitor Management","description":null,"products":[{"product_id":"aviom-d800","title":"Aviom D800 A-Net Distributor","description":"\u003cp\u003eThe \u003cstrong\u003eAviom D800-Dante A-Net Distributor\u003c\/strong\u003e provides the link between the input module or console card and the Personal Mixers, providing power and a copy of the digital audio stream to your Aviom Personal Mixers, utilizing standard Cat-5e cables.\u003c\/p\u003e\r\n\u003cp\u003eBoth units also integrate additional advanced options for delivering high-channel-count audio streams to your Personal Mixers, streamlining connections between A360s and transmitters for wireless in-ear monitors, and integrating the A360 Display iOS app.\u003c\/p\u003e\r\n\u003cp\u003eThe D800 can be used with A-16II, A320, and A360 Personal Mixers in any combination.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eSimple setup, Powerful performance\u003c\/h3\u003e\r\n\u003cp\u003eOn the most basic level, the D800 and the D800-Dante do an unglamorous but important job: get power and audio to your Personal Mixers. Set-up is a breeze, with no IP addressing, routing, or switch managing to worry about, so you can get set up and start mixing in no time, without a lot of hassle.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_1\"\u003eGet more channels to your mixers\u003c\/h3\u003e\r\n\u003cp\u003eUsed in conjunction with the SB4 System Bridge and Pro16 A-Net console cards (such as the Y1 A-Net Card for Yamaha), the D800 can combine up to four 16-channel A-Net streams for sending up to 64 channels directly from your digital console to your Aviom Personal Mixers. Mix channels can be individually selected for each A360 Personal Mixer using A360 Channel Manager, allowing each musician to mix exactly the sources they need.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_4\"\u003eGrow your system\u003c\/h3\u003e\r\n\u003cp\u003eIf you need more than eight Personal Mixers, both the D800 includes an A-Net Out port on the rear panel—perfect for sending the incoming audio stream (regardless of its original source) on to additional A-Net Distributors. Learn more about expanding your system.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_5\"\u003eNetwork Mix Back for wireless in-ears\u003c\/h3\u003e\r\n\u003cp\u003eIf you're using A360 Personal Mixers, the D800 eliminates the need for running analog cables from A360s to the transmitter units for the in-ear monitors.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_6\"\u003eExtend the interface with iOS\u003c\/h3\u003e\r\n\u003cp\u003eThe D800 manages communication between A360 Personal Mixers and supported iOS devices, allowing users to run the A360 Display app alongside their A360.\u003c\/p\u003e","brand":"Aviom","offers":[{"title":"Default Title","offer_id":44449699856487,"sku":"42065","price":2149.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/aviom-d800_42065_1_e76352ae-eda9-48e7-8b64-68b39518f9a9.jpg?v=1787090042"},{"product_id":"digital-audio-labs-m-16-central-mixer-distributor-rack-unit","title":"Digital Audio Labs MIX-16 Central Mixer\/Distributor Rack Unit","description":"\u003cp\u003eThe \u003cstrong\u003eDigital Audio Labs M-16 Central Mixer\/Distributor Rack Unit\u003c\/strong\u003e is the central mixer for the Livemix personal monitoring system. The MIX-16 supplies mix streams as well as power to each of the connected personal mixers.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe MIX-16 will generally be placed near the personal mixers, likely in a rack near the stage. The MIX-16 receives input data over a network cable, either from the AD-24 (shielded) or a Dante network via the LM-DANTE-EXP Dante card.\u003c\/p\u003e\r\n\r\n\u003cp\u003eEach port on the MIX-16 supports two discrete mixes. Connect a single CS-DUO or up to two CS-SOLOs to each port with standard network cable. Maximum combined CAT5e cable (shielded or unshielded) distance is 100 meters.\u003c\/p\u003e\r\n\r\n\r\n\r\n\r\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eMax cable length to CS-SOLO\/CS-DUO:   100 m CAT5e cable (shielded recommended)\u003c\/li\u003e\r\n\u003cli\u003eMax cable length to AD-24\/DA-816: 100 m CAT5e cable (shielded required)\u003c\/li\u003e\r\n\u003cli\u003e24-bit digital mixing and processing\u003c\/li\u003e\r\n\u003cli\u003e48 kHz sample rate\u003c\/li\u003e\r\n\u003cli\u003eDigital format:   proprietary in system\u003c\/li\u003e\r\n\u003cli\u003eExpansion:    option card slot\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eLIVEMIX PERSONAL MONITOR SYSTEM\u003c\/h3\u003e\r\n\r\n\u003cp\u003eLivemix is the personal monitoring system that is simple enough for volunteers to use, but deep enough to meet professional demands. In addition to ease of use and amazing features, Livemix sounds incredible and is an outstanding value.\u003c\/p\u003e\r\n\r\n\u003cp\u003eEvery Livemix system needs an input, a central mixer\/distributor, and at least one personal mixer. To design the system, just select which input you need, either analog or Dante digital. Then select the central mixer based on how many mixes you need now or may need in the future. Then determine how many personal mixers you need. The CS-SOLO personal mixer, provides one personal mix. The CS-DUO dual mix personal mixer, provides two separate mixes, helping reduce additional costs and stage clutter. Lastly, select how many MT-1 mic stand mounts and accessories you may need.\u003c\/p\u003e","brand":"Digital Audio Labs","offers":[{"title":"Default Title","offer_id":44450145271911,"sku":"82521","price":1599.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/digital-audio-labs-mix16_82521_1_011d1e39-0005-4be9-b7e6-f11b82bce16e.jpg?v=1787091862"},{"product_id":"digital-audio-labs-livemix-digital-bundle","title":"Digital Audio Labs LiveMix Digital Bundle","description":"\u003cp\u003eThe \u003cstrong\u003eDigital Audio Labs LiveMix Digital Bundle\u003c\/strong\u003e includes everything you need to get started with 8 mixes. This bundle includes the LM-DANTE-EXP Dante input option card for the MIX-16, and 4 CS-DUO dual mix personal mixers for a total of 8 mixes.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eIncludes:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eLivemix LM-DANTE-EXP Dante digital network input option card\u003c\/li\u003e\r\n\u003cli\u003eLivemix MIX-16 16 mix central mixer\u003c\/li\u003e\r\n\u003cli\u003e4 Livemix CS-DUOs dual mix personal mixers\u003c\/li\u003e\r\n\u003cli\u003e4 Livemix MT-1 dual position mic stand mounts\u003c\/li\u003e\r\n\u003cli\u003e4 CBL-CAT6-50  50 ft shielded CAT6 cables (connects CS-DUO to MIX-16)\u003c\/li\u003e\r\n\u003cli\u003e1 CBL-CAT6-100  100 ft shielded CAT6 cables (connects to LM-DANTE-EXP)\u003c\/li\u003e\r\n\u003cli\u003e1 CBL-CAT6-1 1 ft shielded CAT6 cables (connects AD-24 to MIX-16)\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Digital Audio Labs","offers":[{"title":"Default Title","offer_id":44450145337447,"sku":"82520","price":5567.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/digital-audio-labs-livemix_82520_1_bcf1e644-d0fa-4d3c-a27c-b535c56447ec.jpg?v=1787091862"},{"product_id":"digital-audio-labs-livemix-analog-bundle","title":"Digital Audio Labs LiveMix Analog Bundle","description":"\u003cp\u003eThe \u003cstrong\u003eDigital Audio Labs LiveMix Analog Bundle\u003c\/strong\u003e includes everything you need to get started with 8 mixes. This bundle includes the AD-24 analog input rack unit and 4 CS-DUO dual mix personal mixers for a total of 8 mixes.\u003c\/p\u003e\r\n\r\n\u003ch3\u003eIncludes:\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003eLivemix AD-24 analog input rack unit\u003c\/li\u003e\r\n\u003cli\u003eLivemix MIX-16 16 mix central mixer\u003c\/li\u003e\r\n\u003cli\u003e4 Livemix CS-DUOs dual mix personal mixers\u003c\/li\u003e\r\n\u003cli\u003e4 Livemix MT-1 dual position mic stand mounts\u003c\/li\u003e\r\n\u003cli\u003e4 CBL-CAT6-50 50′ shielded CAT6 cables (connects CS-DUO to MIX-16)\u003c\/li\u003e\r\n\u003cli\u003e1 CBL-CAT6-100 100′ shielded CAT6 cable (connects AD-24 to MIX-16)\u003c\/li\u003e\r\n\u003cli\u003e1 CBL-CAT6-1 1′ shielded CAT6 cable (connects AD-24 to MIX-16)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eLIVEMIX AD-24 ANALOG INPUT UNIT\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003e24 balanced\/unbalanced inputs\u003c\/li\u003e\r\n\u003cli\u003e¼” TRS \u0026amp; DB-25 audio connections\u003c\/li\u003e\r\n\u003cli\u003eFront panel +4dBu\/-10dBV switches\u003c\/li\u003e\r\n\u003cli\u003eFront panel VU metering\u003c\/li\u003e\r\n\u003cli\u003eHigh quality conversion\u003c\/li\u003e\r\n\u003cli\u003eExternal power supply\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch3\u003eLIVEMIX MIX-16 CENTRAL MIXER\/DISTRIBUTOR\u003c\/h3\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003e24 channel digital input\u003c\/li\u003e\r\n\u003cli\u003e24-bit digital mixing \u0026amp; processing\u003c\/li\u003e\r\n\u003cli\u003eProvides power to personal mixers\u003c\/li\u003e\r\n\u003cli\u003eExternal power supply\u003c\/li\u003e\r\n\u003cli\u003eExpansion input option slot\u003c\/li\u003e\r\n\u003cli\u003eUSB connection to PC\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\r\n\u003ch4\u003eLIVEMIX CS-DUO DUAL MIX PERSONAL MIXER\u003c\/h4\u003e\r\n\r\n\u003cul\u003e\r\n\u003cli\u003e24 channels\u003c\/li\u003e\r\n\u003cli\u003eTwo mixes, one personal mixer for reduced clutter and cost\u003c\/li\u003e\r\n\u003cli\u003eLCD Touchscreen\u003c\/li\u003e\r\n\u003cli\u003eDedicated ME knob\u003c\/li\u003e\r\n\u003cli\u003eEQ, HPF, \u0026amp; dynamics with presets on every channel\u003c\/li\u003e\r\n\u003cli\u003eMirrorMix® remote setup and mixing (hear and mix from any personal mixer)\u003c\/li\u003e\r\n\u003cli\u003eBuilt-in ambient microphones\u003c\/li\u003e\r\n\u003cli\u003eBuilt-in intercom\u003c\/li\u003e\r\n\u003cli\u003eAux input for media players\u003c\/li\u003e\r\n\u003cli\u003e⅛” and ¼” headphone outs\u003c\/li\u003e\r\n\u003cli\u003eHigh powered crystal clear headphone amplifier\u003c\/li\u003e\r\n\u003cli\u003eRugged metal construction\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Digital Audio Labs","offers":[{"title":"Default Title","offer_id":44450145304679,"sku":"82519","price":5895.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/digital-audio-labs-livemix-analog_82519_1_84d57f06-c429-4565-933b-e31134485829.jpg?v=1787091862"},{"product_id":"digital-audio-labs-ad-24-analog-input-rack-unit","title":"Digital Audio Labs AD-24 Analog Input Rack Unit","description":"\u003cp\u003eIf you have an analog based system, the \u003cstrong\u003eDigital Audio Labs AD-24 Analog Input Rack Unit\u003c\/strong\u003e takes your analog signals and converts them to digital, for use in the Livemix system. It will most likely be installed near the analog source. If this is your mixer’s Direct Outs or Inserts, then the AD-24 will be near the mixer. If you use a snake with mic preamps, it might be near the snake.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe AD-24 receives your input signal via TRS or DB-25. The inputs pass through, so you can send your audio to the AD-24 via DB-25, and back out through the TRS if required.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe front panel interface indicates input signal levels by LED and allows selection of -10 dBV or +4 dBu line level, which are in stereo pairs.\u003c\/p\u003e","brand":"Digital Audio Labs","offers":[{"title":"Default Title","offer_id":44450145402983,"sku":"82522","price":1349.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/digital-audio-labs-ad-24_82522_1_3e63b2d3-e255-42e6-b38e-5eccb05a0810.jpg?v=1787091863"},{"product_id":"digital-audio-labs-cs-solo-personal-mixer","title":"Digital Audio Labs CS-SOLO Personal Mixer","description":"\u003cp\u003eThe \u003cstrong\u003eDigital Audio Labs CS-SOLO Personal Mixer\u003c\/strong\u003e is the most feature rich personal monitor mixer on the market. The LCD touchscreen with custom naming makes creating a mix easy. Dedicated knobs provide quick access to essential features.\u003c\/p\u003e\r\n\r\n\u003cp\u003eThe CS-SOLO provides 24 channels plus accessory channels, each with EQ and compression. The master output features EQ, compression and reverb. MirrorMix® remote setup and mixing, mute and solo options, channel grouping and LCD dimming make the Livemix system deep enough for professionals, but simple enough for volunteers.\u003c\/p\u003e\r\n\r\n\u003cp\u003eTo maximize stage mixes, connect two CS-SOLO units to a single port on the MIX-16 or MIX-32. The first mixer is the blue “A Mix” while the second unit will be the red “B Mix”. Power and audio is supplied to the second CS-SOLO over a network cable connected to the CS-SOLO THRU port.\u003c\/p\u003e","brand":"Digital Audio Labs","offers":[{"title":"Default Title","offer_id":44450145370215,"sku":"82523","price":549.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/digital-audio-labs-cs-solo_82523_1_1b0fae7a-56a0-43e7-9409-999cb14b2dbb.jpg?v=1787091863"},{"product_id":"midas-hub4","title":"Midas HUB4 Monitor System Hub with 4 PoE Ports for Personal Mixers","description":"\u003cp\u003eThe \u003cstrong\u003eMidas HUB4\u003c\/strong\u003e is the multi-tool in your stage rack providing analog and digital outputs for various applications. HUB4 can supply up to four DP48 personal monitor mixers with PoE (Power over Ethernet) and 48 channels of 24-bit \/ 48 kHz audio. HUB4 also collects 48 channels of upstream audio and forwards this audio to the FOH console, either from stage boxes connected to the AES50-B (THRU) Port or 8 return channels from each of Ports 1-4.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eCascading Hubs for Large Setups\u003c\/h3\u003e\r\n\u003cp\u003eTo meet the challenges of large monitoring setups, HUB4 can easily be daisy-chained to make additional DP48 ports available, all the way up to symphonic orchestra applications.\u003c\/p\u003e\r\n\u003cp\u003eOn the other hand, HUB4 can also address situations where you want to connect additional I\/O via the same AES50 link to the mixing console. To help build out this AES50 console link, digital stage boxes such as the Midas DL16 or DL32 can be connected to the HUB4’s AES50-B (THRU) Port. The console can pass downstream signals to their respective stage outputs, while also receiving 48 channels upstream from the stage inputs via HUB4.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_1\"\u003eAnalog Outputs for IEM Transmitters\u003c\/h3\u003e\r\n\u003cp\u003eHUB4 features 16 balanced line-level outputs that can carry the 8 stereo mixes from the connected DP48 mixers for connections in the side rack. So there is no need to run additional lines from personal mixers to the transmitters, reducing setup time and reliability considerably. Alternatively, these analog outputs can also be used as spare outputs on stage receiving signals directly from the FOH consoles, e.g. for providing talkback or side fill outputs.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_2\"\u003eSupport from Midas M32 Series Consoles\u003c\/h3\u003e\r\n\u003cp\u003eHUB4 can convey control messages from M32 FOH consoles to DP48 personal mixers, as well as remote control messages between DP48 units.\u003c\/p\u003e\r\n\u003cp\u003eMidas DP48 Personal Monitor Mixers support remote control of other DP48 units and can also receive control information from M32 mixing consoles. This M32 control information includes assignments, names and colors of channels, which are transmitted via AES50 for easy configuration of personal mixers. HUB4 can convey control messages from the FOH console to personal mixers as well as between personal mixers. This control message system works when DP48 units are connected to Ports 1-4 or to the ports on daisy-chained hubs.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_3\"\u003eMidas DL8 PoE (Power over Ethernet) Powered Stage Boxes\u003c\/h3\u003e\r\n\u003cp\u003eHUB4 easily interfaces with the new Midas DL8 stage box, which makes bulky analog sub-snakes a thing of the past. The DL8 stage box can be connected to one of HUB4 Ports 1-4 using only a simple CAT5E STP cable. This cable connection from HUB4 can directly power up to 4 stage boxes via PoE support – IEEE802.3at per port – allowing for shorter analog lines on stage.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_4\"\u003eRemote Control Forwarding Through HUB4\u003c\/h3\u003e\r\n\u003cp\u003eHUB4 also facilitates one of the exceptional features of DP48 Personal Monitoring systems in which one DP48 unit can be designated as Master and used to control one or more DP48 units in Slave mode. HUB4 ensures that personal mixers are enumerated and that the Master, i.e., the DP48 connected to Port 1 of the first HUB4 in a daisy-chain, can control the respective Slaves. This way either a tech-savvy bandmate or the technician can help talents on stage with their personal monitor sound.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_5\"\u003eStageCONNECT – The Future of XLR\u003c\/h3\u003e\r\n\u003cp\u003eHUB4 also features a designated StageCONNECT port on the rear panel, anticipating the future of XLR connectivity.\u003c\/p\u003e\r\n\u003col\u003e\r\n\u003cli\u003eWhat if any standard XLR, microphone or DMX cable could be used to transmit more than one channel of audio?\u003c\/li\u003e\r\n\u003cli\u003eWhat if that cable could transmit signals not only one way, but bi-directionally?\u003c\/li\u003e\r\n\u003cli\u003eWhat if that cable would allow the passage of control data or even MIDI at the same time?\u003c\/li\u003e\r\n\u003cli\u003eWhat if a connected StageCONNECT device could receive up to 18 W of power through that same cable?\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cp\u003eWell, these capabilities are exactly what StageCONNECT delivers – a new interface standard to be released by Music Tribe after two years of development. This new standard comes with outstanding technical specs: 32 channels of uncompressed PCM audio in various I\/O configurations, 24-bit at 48 kHz, below 0.5 ms of latency. The design we developed will be publicly available free of charge for anyone interested in designing their own audio equipment, compatible with the future of XLR – StageCONNECT.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_6\"\u003eEtherCON CAT5E-STP for AES50 Remote Connections Up to 100 m Length\u003c\/h3\u003e\r\n\u003cp\u003eHUB4 uses rugged industry-standard EtherCon connectors to ensure stable operation in live production environments. For best performance, a good quality CAT5E STP cable, such as Klark Teknik NCAT5E-50, allows for remote operation up to 100 m distance.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_7\"\u003eControls \u0026amp; Connectivity\u003c\/h3\u003e\r\n\u003cp\u003eHUB4’s large backlit front panel buttons show when a device is connected to the corresponding AES50 port and indicate whether the upstream signals are being sent to the desired outputs.\u003c\/p\u003e","brand":"Midas","offers":[{"title":"Default Title","offer_id":44450587148391,"sku":"139677","price":869.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/midas-hub4_139677_1_c75f1858-2a5b-4054-a63a-bce31ab3803d.jpg?v=1787093654"},{"product_id":"studio-technologies-model-35-talent-amp","title":"Studio Technologies Model 35 Talent Amp","description":"\u003cp\u003eThe \u003cstrong\u003eStudio Technologies Model 35 Talent Amplifier\u003c\/strong\u003e is a full-featured stereo headphone amplifier (cue) for use with the StudioComm 74\/75 Surround Monitoring System.\u003c\/p\u003e\r\n\u003cp\u003eModel 35 modules are typically deployed in voice-over booths, studio areas, or other locations where voice or music talent needs access to a headphone cue feed. Using a standard 3-pin XLR-type audio cable, the Model 35 connects directly to, and is powered by, a StudioComm 74\/75 system. The Model 35 provides a stereo audio amplifier, built-in level control, stereo\/mono switch, and support for one or two pairs of headphones. Up to four Model 35 Talent Amplifier modules can be used with a StudioComm 74\/75 system.\u003c\/p\u003e","brand":"Studio Technologies","offers":[{"title":"Default Title","offer_id":44450640789607,"sku":"87614","price":170.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/studio-tech-model-35_87614_1_a5445902-1d66-4c9e-a04e-35ff76991d11.jpg?v=1787093872"},{"product_id":"studio-technologies-studiocomm-74-75","title":"Studio Technologies StudioComm 74\/75","description":"\u003cp\u003e\u003cstrong\u003eStudio Technologies StudioComm 74\/75\u003c\/strong\u003e work together to provide 5.1 surround and stereo source monitoring capabilities, along with a full-featured headphone \"talkback\" cue system. The system is a perfect fit for contemporary facilities that need to perform a variety of audio tasks. These can include surround and stereo mixing and monitoring, live recording of voice, music, and sound effects, and on-air broadcast applications. The system's features were carefully selected to provide extensive capabilities while remaining simple to operate. Of overriding concern is maintaining the quality of the connected audio sources. This is accomplished using a combination of excellent circuit design and carefully selected components. The Model 74\/Model 75 combination is ideal for adding surround monitoring capability to disk-based recording systems. It's also well suited for upgrading a post-production or broadcast facility to support multi-channel monitoring.\u003c\/p\u003e","brand":"Studio Technologies","offers":[{"title":"Default Title","offer_id":44450658517095,"sku":"57313","price":2550.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/studio-tech-74-75_57313_1_f2fbb780-ed99-4362-abba-e1f59f75add4.jpg?v=1787093949"},{"product_id":"studio-technologies-model-76da-77-surround-monitoring-system","title":"Studio Technologies Model 76DA\/77 Surround Monitoring System","description":"\u003cp\u003eAs creating and distributing multi-channel surround (5.1) and stereo audio material has become a day-to-day reality, the ability to simply and effectively monitor these sources is imperative for recording, post-production, and broadcast facilities. And with audio-with-picture applications becoming so prevalent, additional monitoring challenges have arisen. Studio Technologies has addressed these needs with the \u003cstrong\u003eStudio Technologies Model 76DA\/77 Surround Monitoring System\u003c\/strong\u003e. With digital audio inputs, digital and analog monitor outputs, support for multiple user control surfaces, and an extensive set of operating resources it's a simple task to integrate a monitoring system into virtually any facility. The carefully selected group of features, including surround and stereo inputs, configurable input-signal time delay, multiple pre- and post-fader outputs, configurable downmix and mute\/solo functions, and bass management, along with a multi-format sync input, make the system powerful yet simple to operate. And by using the best of contemporary technology, as well as following rigorous design practices, the system's audio quality is excellent.\u003c\/p\u003e","brand":"Studio Technologies","offers":[{"title":"Default Title","offer_id":44450658582631,"sku":"131611","price":4340.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/studio-tech-76da-77_131611_1_8eac9ec5-caee-497f-9521-d0e4c50c57fc.jpg?v=1787093949"},{"product_id":"aviom-d800-with-dante","title":"Aviom D800 A-Net Distributor with Dante","description":"\u003cp\u003eThe \u003cstrong\u003eAviom D800-Dante A-Net Distributor\u003c\/strong\u003e provides the link between the input module or console card and the Personal Mixers, providing power and a copy of the digital audio stream to your Aviom Personal Mixers, utilizing standard Cat-5e cables.\u003c\/p\u003e\r\n\u003cp\u003eBoth units also integrate additional advanced options for delivering high-channel-count audio streams to your Personal Mixers, streamlining connections between A360s and transmitters for wireless in-ear monitors, and integrating the A360 Display iOS app.\u003c\/p\u003e\r\n\u003cp\u003eThe D800 can be used with A-16II, A320, and A360 Personal Mixers in any combination.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_0\"\u003eSimple setup, Powerful performance\u003c\/h3\u003e\r\n\u003cp\u003eOn the most basic level, the D800 and the D800-Dante do an unglamorous but important job: get power and audio to your Personal Mixers. Set-up is a breeze, with no IP addressing, routing, or switch managing to worry about, so you can get set up and start mixing in no time, without a lot of hassle.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_1\"\u003eGet more channels to your mixers\u003c\/h3\u003e\r\n\u003cp\u003eUsed in conjunction with the SB4 System Bridge and Pro16 A-Net console cards (such as the Y1 A-Net Card for Yamaha), the D800 can combine up to four 16-channel A-Net streams for sending up to 64 channels directly from your digital console to your Aviom Personal Mixers. Mix channels can be individually selected for each A360 Personal Mixer using A360 Channel Manager, allowing each musician to mix exactly the sources they need.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_2\"\u003eConnect directly to Dante\u003c\/h3\u003e\r\n\u003cp\u003eIf your audio system includes a Dante audio network, the D800 with Dante can interface directly to the network. Assign up to 64 channels from Dante to the D800 with Dante for distribution to the Aviom Personal Mixers. Mix channels can be individually selected for each A360 using A360 Channel Manager. Rear-panel DIP switches are used to set the stereo links for channels going to the Personal Mixers. Use the Dante Controller Mac\/PC software application for channel routing.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_3\"\u003eDante Sample Rates Up to 192 kHz\u003c\/h3\u003e\r\n\u003cp\u003eWith the D800 with Dante, you can run your Dante network at 44.1\/48 kHz, 88.2\/96 kHz, or 176.4\/19 2 kHz. At higher sample rates, the D800 with Dante converts the audio data to 48 kHz for distribution to the Aviom Personal Mixers (and other A-Net devices).\u003c\/p\u003e\r\n\u003ch3 id=\"toc_4\"\u003eGrow your system\u003c\/h3\u003e\r\n\u003cp\u003eIf you need more than eight Personal Mixers, both the D800 includes an A-Net Out port on the rear panel—perfect for sending the incoming audio stream (regardless of its original source) on to additional A-Net Distributors. Learn more about expanding your system.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_5\"\u003eNetwork Mix Back for wireless in-ears\u003c\/h3\u003e\r\n\u003cp\u003eIf you're using A360 Personal Mixers, the D800 eliminates the need for running analog cables from A360s to the transmitter units for the in-ear monitors.\u003c\/p\u003e\r\n\u003ch3 id=\"toc_6\"\u003eExtend the interface with iOS\u003c\/h3\u003e\r\n\u003cp\u003eThe D800 manages communication between A360 Personal Mixers and supported iOS devices, allowing users to run the A360 Display app alongside their A360.\u003c\/p\u003e","brand":"Aviom","offers":[{"title":"Default Title","offer_id":44450659762279,"sku":"52713","price":3399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/aviom-d800_52713_1_9498b372-2f04-4394-bce4-34f1c82a9df9.jpg?v=1787093954"},{"product_id":"behringer-powerplay-p16-d-powerplay-p16-d-distribution-module","title":"Behringer POWERPLAY P16-D 16-Channel ULTRANET Distribution Module","description":"\u003cp\u003eThe POWERPLAY P16 system is the easy, affordable way to give live or recording musicians\/vocalists what they really want \"more me!\" When used in conjunction with your X32 Digital Mixing Console, P16-I Input Module or S16 Digital Snake, the \u003cstrong\u003eBehringer POWERPLAY P16-D\u003c\/strong\u003e distributor can provide 8 additional ULTRANET RJ-45 outputs, giving you the power to expand your existing P16-M system (up to 48 stations). In addition to sending 16 channels of digital audio to the P16-M mixers, the P16-D also supplies operating power, totally eliminating the need for power adapters and creating a much more streamlined stage or studio environment.\u003c\/p\u003e  \u003cp\u003eFast and easy to set up, a basic system can be installed and configured in a matter of minutes and the system can be expanded to adapt to changing needs. The POWERPLAY P16 Personal Monitoring System puts total control of the monitor mix into the artist's hands, and when they can hear exactly what they want and need to hear their best performance is unleashed!\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eULTRANET – SEAMLESS INTEGRATION\u003c\/h3\u003e  \u003cp\u003eThe world-renowned engineers at Klark Teknik, Midas, Turbosound and Behringer have all come together to create something truly innovative that will change live and studio workflow forever ULTRANET. This revolutionary technology seamlessly transmits up to 16 independent channels of 24-bit digital audio and control data via a single CAT5 cable between compatible digital devices including mixers, I\/O stage boxes, powered loudspeakers and personal monitoring systems. Advantages realized through ULTRANET digital networking, versus traditional analog methods: audio signals are impervious to Radio Frequency Interference (RFI); signal crosstalk is eliminated; and ease of setup translates directly into significant time saved during installation. ULTRANET effectuates a powerful digital eco-system that gives you unparalleled control over every element of your audio production environment from one convenient location.\u003c\/p\u003e  \u003ch3 id=\"toc_1\"\u003eEASY INSTALLATION\u003c\/h3\u003e  \u003cp\u003eA basic installation consists of one P16-I Input Module, which connects to the main mixing console and up to six P16-M Personal Mixers, creating a system big enough to equip a typical recording studio, a small to medium-sized band or a worship team. And if you need to go bigger, that's where the P16-D comes in. The system can easily be expanded via the P16-D Digital ULTRANET Distributor, six of which can be combined to drive up to forty-eight P16-M Personal Mixers.\u003c\/p\u003e  \u003ch3 id=\"toc_2\"\u003eFEATURES GALORE\u003c\/h3\u003e  \u003cp\u003eIf you're already an X32 user, the P16-D connects right to your native ULTRANET output to provide distribution and power to up to 6 individual P16-Ms. But even without an X32 in the mix, the P16-D can augment your P16-I's output section and all you'll need is a standard Cat 5e cable. The P16-D even includes status LED indicators for RJ-45 input and 8 RJ-45 outputs and an internal auto-ranging power supply for maximum flexibility around the globe (100 - 240 V~), noise-free audio, superior transient response and low power consumption.\u003c\/p\u003e  \u003ch3 id=\"toc_3\"\u003eEXTRAORDINARY VALUE\u003c\/h3\u003e  \u003cp\u003eThe POWERPLAY P16 Personal Monitoring System puts total control of the monitor system where it belongs – in the hands of the performers, freeing up the engineer to sculpt the perfect front-of-house mix. By putting dynamic control over virtually all elements (Volume, Pan, Solo \u0026amp; Mute) of up to 16 input signals within each performer’s reach, the P16 Personal Monitoring System provides the easy and affordable way to give them exactly what they want – “more me!” Check out the P16-D Distribution Hub to expand your P16 system today – and experience the ultimate in live and studio personal monitoring.\u003c\/p\u003e","brand":"Behringer","offers":[{"title":"Default Title","offer_id":44451216326759,"sku":"473431","price":139.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/behringer-powerplay-p16-d_473431_1.jpg?v=1787096330"},{"product_id":"behringer-powerplay-p16-hq-16-channel-digital-personal-mixer","title":"Behringer POWERPLAY P16-HQ 16-Channel Digital Personal Monitoring Mixer","description":"\u003cp\u003eThe \u003cstrong\u003eBehringer POWERPLAY P16-HQ\u003c\/strong\u003e builds on the success of P16-M, an industry favorite, with its high-quality DA converter, output amplifier, a design refresh and more! The P16-HQ is a great and affordable way to give performers control over their own monitor mix; leaving room for engineers to create the best overall mix possible.\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eFLEXIBLE AND FULL OF CHARACTER\u003c\/h3\u003e  \u003cp\u003eThe P16-HQ includes a new digital-to-analog converter with a dynamic range of 114dB, coupled with a new high-quality amplifier stage providing improved performance and volume, especially with low-impedance headphones and in-ears.\u003c\/p\u003e  \u003ch3 id=\"toc_1\"\u003eCOMPLETE CONTROL\u003c\/h3\u003e  \u003cp\u003eThe P16-HQ sports a new look while maintaining the intuitive control surface that made P16-M so popular! All surface controls such as the 16 channel buttons, level, pan\/balance controls have their own backlighting and LED indicators. All knobs and buttons are easily visible thanks to the backlighting and LED indicators added across the control surface. This allows the user to adjust on-the-fly, even on a dimly lit stage.\u003c\/p\u003e  \u003cp\u003eControls on the P16-HQ include:\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eLevel and Panorama\/Balance\u003c\/li\u003e \u003cli\u003e3-band EQ per channel\u003c\/li\u003e \u003cli\u003eAdjustable mid-band frequency on main channel\u003c\/li\u003e \u003cli\u003eSolo and Mute functions per channel\u003c\/li\u003e \u003c\/ul\u003e  \u003ch3 id=\"toc_2\"\u003eAMAZING ON STAGE\u003c\/h3\u003e  \u003cp\u003eSetting up a stage and making sure everything is getting the right amount of power can be tricky but having the P16-HQ makes this process a breeze as it comes equipped with Ultranet technology. With Ultranet, you can send up to 16 independent channels as well as power! If your setup requires many personal monitors, having multiple P16-HQs can make that process easier.\u003c\/p\u003e","brand":"Behringer","offers":[{"title":"Default Title","offer_id":44451216359527,"sku":"470363","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/behringer-powerplay-p16-hq_470363_1.jpg?v=1787096330"},{"product_id":"behringer-powerplay-p16-i-16-channel-audio-module","title":"Behringer POWERPLAY P16-I 16-Channel Audio Input Module","description":"\u003cp\u003eThe POWERPLAY P16 system is the easy and affordable way to give live or recording musicians\/vocalists what they really want – “more me!” Part of the P16 Personal Monitoring System, the \u003cstrong\u003eBehringer POWERPLAY P16-I\u003c\/strong\u003e input module can be used with any analog source, and convert up to 16 analog inputs into 24-bit digital audio to send to your P16-M Personal Monitoring Mixers. The P16-I is also equipped with ADAT optical inputs that auto-detect and give priority to incoming signals.\u003c\/p\u003e  \u003cp\u003eFast and easy to set up, a basic system can be installed and configured in a matter of minutes – and the system can be expanded to adapt to changing needs. The POWERPLAY P16 Personal Monitoring System puts total control of the monitor mix into the artist’s hands, and when they can hear exactly what they want and need to hear – their best performance is unleashed!\u003c\/p\u003e  \u003ch3 id=\"toc_0\"\u003eADAT-READY\u003c\/h3\u003e  \u003cp\u003eThe P16-I includes a 2x 8-channel ADAT optical input with auto detect and priority select for use with existing ADAT equipment. Additionally, 16 balanced, high-headroom TRS audio inputs can be employed to send audio from analog outputs to your P16-Ms. You can choose from 4 gain positions per channel via a convenient onboard switch, and visually monitor by means of the status LEDs on each channel. Sample rates of 44.1 or 48 kHz are supported by the digital inputs, providing ultra-low latency of less than 1 millisecond. Standard Cat 5e cabling delivers power and signals for up to 6 P16-M Personal Monitoring Mixers, or you can use the included external supplies with each P16-M. Plus, the P16-I features an internal auto-ranging power supply for maximum flexibility (100 – 240 V~), noise-free audio, superior transient response and low power consumption.\u003c\/p\u003e  \u003ch3 id=\"toc_1\"\u003eULTRANET – SEAMLESS INTEGRATION\u003c\/h3\u003e  \u003cp\u003eThe world-renowned engineers at Klark Teknik, Midas, Turbosound and Behringer have all come together to create something truly innovative that will change live and studio workflow forever – ULTRANET. This revolutionary technology seamlessly transmits up to 16 independent channels of 24-bit digital audio and control data via a single CAT5 cable between compatible digital devices – including mixers, I\/O stage boxes, powered loudspeakers and personal monitoring systems. Advantages realized through ULTRANET digital networking, versus traditional analog methods: audio signals are impervious to Radio Frequency Interference (RFI); signal crosstalk is eliminated; and ease of setup translates directly into significant time saved during installation. ULTRANET effectuates a powerful digital eco-system that gives you unparalleled control over every element of your audio production environment from one convenient location.\u003c\/p\u003e  \u003ch3 id=\"toc_2\"\u003eEASY INSTALLATION\u003c\/h3\u003e  \u003cp\u003eA basic installation consists of one P16-I Input Module, which connects to the main mixing console and up to six P16-M Personal Mixers, creating a system big enough to equip a typical recording studio, small to medium-sized band or worship team. You’ll also need a few standard audio and Cat 5e cables. The optional P16-MB mounting bracket allows the P16-M Digital Personal Mixer to be attached to any standard microphone, music or drum stand. As many as six P16-D Digital ULTRANET Distributors can be added to your system to accommodate up to forty-eight P16-M Personal Mixers\u003c\/p\u003e","brand":"Behringer","offers":[{"title":"Default Title","offer_id":44451216392295,"sku":"30504","price":259.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/behringer-powerplay-p16-i_30504_1.jpg?v=1787096330"},{"product_id":"behringer-ultradrive-dcx2496-digital-24-bit-96-khz-loudspeaker-management-system","title":"Behringer ULTRADRIVE DCX2496 Digital 24-Bit\/96 kHz Loudspeaker Management System","description":"\u003cp\u003eThe \u003cstrong\u003eBehringer ULTRADRIVE DCX2496 Digital 24-Bit\/96 kHz Loudspeaker Management System\u003c\/strong\u003e is the ultimate digital loudspeaker management system with an unheard-of audio quality and feature list. It is an indispensable tool for the precise set-up of multiple loudspeaker systems or arrays. Installation contractors, live-sound engineers, cinemas\/discotheques\/concert hall operators will quickly learn to love this model's rich features. Signals can be split in various ways to assure precise sound by using the optimal frequency range of each loudspeaker.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_0\"\u003eCONNECTIVITY AND SOUND QUALITY\u003c\/h3\u003e\r\n\r\n\u003cp\u003eWith 3 analog inputs and 6 analog outputs on servo-balanced, gold-plated XLR connectors and four different mono and stereo output operating modes, you get maximum flexibility in just one rack space. In addition, one of the analog inputs also supports the AES\/EBU and S\/PDIF digital protocols, while a pair of RS-484 ports and an RS-232 connector provide linking and computer-controlled digital networking capabilities. Superb high-end Cirrus Logic 24-bit\/96 kHz AD and DA converters give you ultimate signal integrity and an incredible 120 dB dynamic range.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_1\"\u003ePROCESSING POWER\u003c\/h3\u003e\r\n\r\n\u003cp\u003eSpeaker protection and processing are the cornerstones for any speaker management system. The DCX2496 features precise dynamic EQs for level-dependent equalization, plus extremely musical parametric EQs that can be applied to all I\/O for high-precision signal sculpting. The unit offers 6 outputs with individual crossover filters, including your choice of Butterworth, Bessel, and Linkwitz-Riley designs, each with selectable roll-off characteristics from 6 to 48 dB\/octave, perfect for optimizing any 2-, 3-, or 4-way system. Finally, the “Zero”-attack limiters provide the ultimate in loudspeaker protection on all output channels.\u003c\/p\u003e","brand":"Behringer","offers":[{"title":"Default Title","offer_id":44451240312935,"sku":"101985","price":339.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/behringer-ultradrive-dcx2496-digital-24-bit-96-khz-loudspeaker-management-system_101985_1.jpg?v=1787096437"},{"product_id":"behringer-ultradrive-dcx2496le-digital-24-bit-96-khz-loudspeaker-management-system","title":"Behringer ULTRADRIVE DCX2496LE Digital 24-Bit\/96 kHz Loudspeaker Management System","description":"\u003cp\u003eThe \u003cstrong\u003eBehringer ULTRADRIVE DCX2496LE Digital 24-Bit\/96 kHz Loudspeaker Management System\u003c\/strong\u003e is the answer to making your venue sound like it was tuned by the pros. Over the past years the DCX2496 has become an industry standard and several hundred thousand units have been employed in high-end touring as well as install applications. The new DCX2496 “LE” version offers the same impeccable audio performance as the original DCX2496, but with reduced functionality as many customers do not require the digital inputs and outputs of the standard version. The DCX2496LE is the perfect way to manage a multi-speaker sound system in any sized venue – from cinema to sanctuary to concert hall. Featuring 2 inputs, 6 outputs and 24-bit\/96 kHz high-end AD\/DA converters, this state-of-the-art processor will take your system to the next level and beyond.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_0\"\u003eSUPERB CONNECTIVITY AND IMPECCABLE SOUND QUALITY\u003c\/h3\u003e\r\n\r\n\u003cp\u003eWith 2 analog inputs and 6 analog outputs on servo-balanced, gold-plated XLR connectors and four different mono and stereo output operating modes, you get maximum flexibility in just one rack space. Superb high-end Cirrus Logic * 24-bit\/96 kHz AD and DA converters give you ultimate signal integrity and an incredible dynamic range.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_1\"\u003eHUGE PROCESSING POWER\u003c\/h3\u003e\r\n\r\n\u003cp\u003eSpeaker protection and processing are the cornerstones for any speaker management system. The DCX2496LE features precise dynamic EQs for level-dependent equalization, plus extremely musical parametric EQs that can be applied to all I\/O for high-precision signal sculpting. 6 outputs with individual crossover filters, including your choice of Butterworth, Bessel and Linkwitz-Riley designs, each with selectable roll-off characteristics from 6 to 48 dB\/octave – perfect for optimizing any 2, 3, or 4-way system. Finally, Behringer's “Zero”-attack limiters provide the ultimate in loudspeaker protection on all output channels.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_2\"\u003eLIMITLESS CONTROL\u003c\/h3\u003e\r\n\r\n\u003cp\u003eIn addition to the plethora of EQ filter and crossover options, the DCX2496LE offers adjustable delays for all I\/O, allowing you to either manually, or automatically correct for room temperature, phase and arrival time differences in order to perfectly configure your delay-line speakers. You can store up to 60 user-defined presets internally for quick recall any time you change location. The DCX2496LE gives you the rock-solid solution for great sound – show after show!\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_3\"\u003eINCREDIBLE SOUND AND PROTECTION EVERY TIME\u003c\/h3\u003e\r\n\r\n\u003cp\u003eThe ULTRADRIVE’s sleek design, with its high-power 32-bit Analog Device * Sharc DSP, ultra-high resolution 24-bit\/96kHz Cirrus Logic AD \u0026amp; DA converters and maximum processing power provide outstanding audio performance, helping you get the most out of your sound system – no matter where the gig takes you! Stop by an authorized dealer today and add total control to your sound system – courtesy of the ULTRADRIVE DCX2496LE.\u003c\/p\u003e","brand":"Behringer","offers":[{"title":"Default Title","offer_id":44451240345703,"sku":"108184","price":289.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/behringer-ultradrive-dcx2496le-digital-24-bit-96-khz-loudspeaker-management-system_108184_1.jpg?v=1787096437"},{"product_id":"digital-audio-labs-livemix-pro-solo-md-personal-mixer-with-preamp","title":"Digital Audio Labs LiveMix Pro Solo MD Personal Mixer with Preamp","description":"\u003cp\u003eThe \u003cstrong\u003eDigital Audio Labs Livemix Pro Solo MD\u003c\/strong\u003e has a preamp allowing the use of an external dynamic or condenser microphone with the built-in intercom system. Massive 6\" capacitive touch touchscreen makes mixing easy. Just press the channel to adjust and turn the knob.\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e\u003chr\u003e  \u003ch3 id=\"toc_1\"\u003eLIVEMIX PRO SCALABLE PERSONAL MONITORING SYSTEM\u003c\/h3\u003e  \u003cp\u003eLivemix Pro is a scalable personal monitoring system with up to 64 channels of audio. It is designed to help teams make mixes easily, even with higher channel counts. Less than 64 channels? It can be configured to look like a smaller system. And with the revolutionary Group Mix View, making a personal mix with is simple, even with higher channel counts.\u003c\/p\u003e  \u003cp\u003eEvery Livemix Pro system needs a central mixer\/distributor, and at least one personal mixer. To design the system, just select the distributor unit based on how many total mixes you will need. Then determine how many personal mixers you need. The PRO-SOLO and PRO-SOLO MD personal mixers provides one personal mix per unit. The PRO-DUO dual mix personal mixer, provides two separate mixes, helping reduce additional costs and stage clutter. Lastly, select how many MT-1 mic stand mounts and accessories you may need.\u003c\/p\u003e","brand":"Digital Audio Labs","offers":[{"title":"Default Title","offer_id":44451253289063,"sku":"483050","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/digital-audio-labs-livemix-pro-solo-md_483050_1.jpg?v=1787096493"},{"product_id":"digital-audio-labs-livemix-pro-wireless-stage-bundle","title":"Digital Audio Labs LiveMix Pro Wireless Stage Bundle","description":"\u003cp\u003eDigital Audio Labs Livemix Pro is a scalable personal monitoring system with up to 64 channels of audio. It is designed to help teams make mixes easily, even with higher channel counts. Less than 64 channels? It can be configured to look like a smaller system. And with the revolutionary Group Mix View, making a personal mix with is simple, even with higher channel counts.\u003c\/p\u003e  \u003cp\u003eEvery Livemix Pro system needs a central mixer\/distributor, and at least one personal mixer. To design the system, just select the distributor unit based on how many total mixes you will need. Then determine how many personal mixers you need. The PRO-SOLO and PRO-SOLO MD personal mixers provides one personal mix per unit. The PRO-DUO dual mix personal mixer, provides two separate mixes, helping reduce additional costs and stage clutter. Lastly, select how many MT-1 mic stand mounts and accessories you may need.\u003c\/p\u003e  \u003cp\u003eThe \u003cstrong\u003eDigital Audio Labs LiveMix Pro Wireless Stage Bundle\u003c\/strong\u003e includes:\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eFour PRO DUO (8 mixes)\u003c\/li\u003e \u003cli\u003eOne PRO-16\u003c\/li\u003e \u003cli\u003eOne DA-8\u003c\/li\u003e \u003cli\u003eFour MT-1 Mic Stand Mounts\u003c\/li\u003e \u003cli\u003eOne 25' CAT6 Cable\u003c\/li\u003e \u003cli\u003eFour 50' CAT6 Cables\u003c\/li\u003e \u003cli\u003eOne 100' CAT6 Cable\u003c\/li\u003e \u003c\/ul\u003e  \u003ch3 id=\"toc_0\"\u003eLIVEMIX PRO DUO\u003c\/h3\u003e  \u003cp\u003eThe Digital Audio Labs Personal Mixer provides two mixes in one box offer an incredible value and reduce stage clutter. Each of the two mixes has its own headphone amplifier and outputs. Each mix is fully featured and used the touchscreen to make the perfect personal monitor mix.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003ePersonal monitor mixer with two discrete mixes in one unit\u003c\/li\u003e \u003cli\u003eLarge capacitive touch touchscreen\u003c\/li\u003e \u003cli\u003eDedicated master, adjust, and Me Group knobs\u003c\/li\u003e \u003cli\u003e1\/4\" and 1\/8\" TRS outputs\u003c\/li\u003e \u003cli\u003eEthercon connectors\u003c\/li\u003e \u003cli\u003eUSB jack for saving mix and global settings\u003c\/li\u003e \u003c\/ul\u003e  \u003ch3 id=\"toc_1\"\u003eLIVEMIX PRO-16\u003c\/h3\u003e  \u003cp\u003eThe Dante network ready Digital Audio Labs Livemix Pro-16 is the mix and power distribution center of the Livemix Pro system. Each front panel Ethercon compatible port carries two separate mixes to connected personal mixers.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eFront panel connectors accept both Ethercon or standard CAT-5e\/CAT-6 network cables\u003c\/li\u003e \u003cli\u003eProvides power to connected personal mixers\u003c\/li\u003e \u003cli\u003eBuilt-in primary and secondary Dante ports\u003c\/li\u003e \u003cli\u003eFront panel indication\u003c\/li\u003e \u003cli\u003eUSB port for system firmware updates\u003c\/li\u003e \u003cli\u003eConnects to up to 2 DA-8 (optional) analog output units\u003c\/li\u003e \u003c\/ul\u003e  \u003ch3 id=\"toc_2\"\u003eLIVEMIX DA-8\u003c\/h3\u003e  \u003cp\u003eUse the Digital Audio Labs LiveMix DA-8 to connect your wireless in-ear monitor transmitters or other analog outputs to the Livemix Pro system. Dynamically route personal mixes to outputs from Livemix Pro personal mixers. Output ID with test tone eliminates the need to dig in the back of a rack to trace what output goes where!\u003c\/p\u003e  \u003cul\u003e \u003cli\u003e8 analog stereo outputs\u003c\/li\u003e \u003cli\u003eTRS and DB-25 connectors\u003c\/li\u003e \u003cli\u003eFront panel indicators\u003c\/li\u003e \u003cli\u003eOutput ID indication with test tone\u003c\/li\u003e \u003cli\u003eEasy setup with SoftRoute on PRO DUO\/SOLO\/SOLO MD\u003c\/li\u003e \u003c\/ul\u003e","brand":"Digital Audio Labs","offers":[{"title":"Default Title","offer_id":44451253321831,"sku":"483055","price":7265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/digital-audio-labs-livemix-pro-wireless_483055_1.jpg?v=1787096493"},{"product_id":"digital-audio-labs-livemix-pro-solo-personal-mixer","title":"Digital Audio Labs LiveMix Pro Solo Personal Mixer","description":"\u003cp\u003eThe \u003cstrong\u003eDigital Audio Labs Livemix Pro Solo\u003c\/strong\u003e is a single user personal mixer with pass through power and audio for an additional Pro Solo. Massive 6\" capactiive touch touchscreen makes mixing easy. Just press the channel to adjust and turn the knob.\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e\u003chr\u003e  \u003ch3 id=\"toc_1\"\u003eLIVEMIX PRO SCALABLE PERSONAL MONITORING SYSTEM\u003c\/h3\u003e  \u003cp\u003eLivemix Pro is a scalable personal monitoring system with up to 64 channels of audio. It is designed to help teams make mixes easily, even with higher channel counts. Less than 64 channels? It can be configured to look like a smaller system. And with the revolutionary Group Mix View, making a personal mix with is simple, even with higher channel counts.\u003c\/p\u003e  \u003cp\u003eEvery Livemix Pro system needs a central mixer\/distributor, and at least one personal mixer. To design the system, just select the distributor unit based on how many total mixes you will need. Then determine how many personal mixers you need. The PRO-SOLO and PRO-SOLO MD personal mixers provides one personal mix per unit. The PRO-DUO dual mix personal mixer, provides two separate mixes, helping reduce additional costs and stage clutter. Lastly, select how many MT-1 mic stand mounts and accessories you may need.\u003c\/p\u003e","brand":"Digital Audio Labs","offers":[{"title":"Default Title","offer_id":44451253354599,"sku":"483049","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/digital-audio-labs-livemix-pro-solo_483049_1.jpg?v=1787096493"},{"product_id":"digital-audio-labs-livemix-pro-duo-personal-mixer","title":"Digital Audio Labs LiveMix Pro Duo Personal Mixer","description":"\u003cp\u003eThe \u003cstrong\u003eDigital Audio Labs LiveMix Pro Duo Personal Mixer\u003c\/strong\u003e provides two mixes in one box offer an incredible value and reduce stage clutter. Each of the two mixes has its own headphone amplifier and outputs. Each mix is fully featured and used the touchscreen to make the perfect personal monitor mix.\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e\u003chr\u003e  \u003ch3 id=\"toc_1\"\u003eLIVEMIX PRO SCALABLE PERSONAL MONITORING SYSTEM\u003c\/h3\u003e  \u003cp\u003eLivemix Pro is a scalable personal monitoring system with up to 64 channels of audio. It is designed to help teams make mixes easily, even with higher channel counts. Less than 64 channels? It can be configured to look like a smaller system. And with the revolutionary Group Mix View, making a personal mix with is simple, even with higher channel counts.\u003c\/p\u003e  \u003cp\u003eEvery Livemix Pro system needs a central mixer\/distributor, and at least one personal mixer. To design the system, just select the distributor unit based on how many total mixes you will need. Then determine how many personal mixers you need. The PRO-SOLO and PRO-SOLO MD personal mixers provides one personal mix per unit. The PRO-DUO dual mix personal mixer, provides two separate mixes, helping reduce additional costs and stage clutter. Lastly, select how many MT-1 mic stand mounts and accessories you may need.\u003c\/p\u003e","brand":"Digital Audio Labs","offers":[{"title":"Default Title","offer_id":44451253387367,"sku":"483051","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/digital-audio-labs-livemix-pro-duo_483051_1.jpg?v=1787096493"},{"product_id":"digital-audio-labs-livemix-pro-dante-bundle","title":"Digital Audio Labs LiveMix Pro Dante Bundle","description":"\u003cp\u003eDigital Audio Labs Livemix Pro is a scalable personal monitoring system with up to 64 channels of audio. It is designed to help teams make mixes easily, even with higher channel counts. Less than 64 channels? It can be configured to look like a smaller system. And with the revolutionary Group Mix View, making a personal mix with is simple, even with higher channel counts.\u003c\/p\u003e  \u003cp\u003eEvery Livemix Pro system needs a central mixer\/distributor, and at least one personal mixer. To design the system, just select the distributor unit based on how many total mixes you will need. Then determine how many personal mixers you need. The PRO-SOLO and PRO-SOLO MD personal mixers provides one personal mix per unit. The PRO-DUO dual mix personal mixer, provides two separate mixes, helping reduce additional costs and stage clutter. Lastly, select how many MT-1 mic stand mounts and accessories you may need.\u003c\/p\u003e  \u003cp\u003eThe \u003cstrong\u003eDigital Audio Labs LiveMix Pro Dante Bundle\u003c\/strong\u003e includes:\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eFour PRO DUO (8 mixes)\u003c\/li\u003e \u003cli\u003eOne PRO-16\u003c\/li\u003e \u003cli\u003eFour MT-1 Mic Stand Mounts\u003c\/li\u003e \u003cli\u003eFour 50' CAT6 Cables\u003c\/li\u003e \u003cli\u003eOne 100' CAT6 Cable\u003c\/li\u003e \u003c\/ul\u003e  \u003ch3 id=\"toc_0\"\u003eLIVEMIX PRO DUO\u003c\/h3\u003e  \u003cp\u003eThe Digital Audio Labs  Personal Mixer provides two mixes in one box offer an incredible value and reduce stage clutter. Each of the two mixes has its own headphone amplifier and outputs. Each mix is fully featured and used the touchscreen to make the perfect personal monitor mix.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003ePersonal monitor mixer with two discrete mixes in one unit\u003c\/li\u003e \u003cli\u003eLarge capacitive touch touchscreen\u003c\/li\u003e \u003cli\u003eDedicated master, adjust, and Me Group knobs\u003c\/li\u003e \u003cli\u003e1\/4\" and 1\/8\" TRS outputs\u003c\/li\u003e \u003cli\u003eEthercon connectors\u003c\/li\u003e \u003cli\u003eUSB jack for saving mix and global settings\u003c\/li\u003e \u003c\/ul\u003e  \u003ch3 id=\"toc_1\"\u003eLIVEMIX PRO-16\u003c\/h3\u003e  \u003cp\u003eThe Dante network ready Digital Audio Labs Livemix Pro-16 is the mix and power distribution center of the Livemix Pro system. Each front panel Ethercon compatible port carries two separate mixes to connected personal mixers.\u003c\/p\u003e  \u003cul\u003e \u003cli\u003eFront panel connectors accept both Ethercon or standard CAT-5e\/CAT-6 network cables\u003c\/li\u003e \u003cli\u003eProvides power to connected personal mixers\u003c\/li\u003e \u003cli\u003eBuilt-in primary and secondary Dante ports\u003c\/li\u003e \u003cli\u003eFront panel indication\u003c\/li\u003e \u003cli\u003eUSB port for system firmware updates\u003c\/li\u003e \u003cli\u003eConnects to up to 2 DA-8 (optional) analog output units\u003c\/li\u003e \u003c\/ul\u003e","brand":"Digital Audio Labs","offers":[{"title":"Default Title","offer_id":44451253420135,"sku":"483056","price":6246.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/digital-audio-labs-livemix-pro-dante_483056_1.jpg?v=1787096493"},{"product_id":"digital-audio-labs-livemix-pro-32-personal-mix-distributor","title":"Digital Audio Labs LiveMix Pro-32 Personal Mix Distributor","description":"\u003cp\u003eNeed more than 16 mixes? The Dante network ready \u003cstrong\u003eDigital Audio Labs Livemix Pro-32\u003c\/strong\u003e is the mix and power distribution center of the Livemix Pro system. Each front panel Ethercon compatible port carries two separate mixes to up to 32 connected personal mixers.\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e\u003chr\u003e  \u003ch3 id=\"toc_1\"\u003eLIVEMIX PRO SCALABLE PERSONAL MONITORING SYSTEM\u003c\/h3\u003e  \u003cp\u003eLivemix Pro is a scalable personal monitoring system with up to 64 channels of audio. It is designed to help teams make mixes easily, even with higher channel counts. Less than 64 channels? It can be configured to look like a smaller system. And with the revolutionary Group Mix View, making a personal mix with is simple, even with higher channel counts.\u003c\/p\u003e  \u003cp\u003eEvery Livemix Pro system needs a central mixer\/distributor, and at least one personal mixer. To design the system, just select the distributor unit based on how many total mixes you will need. Then determine how many personal mixers you need. The PRO-SOLO and PRO-SOLO MD personal mixers provides one personal mix per unit. The PRO-DUO dual mix personal mixer, provides two separate mixes, helping reduce additional costs and stage clutter. Lastly, select how many MT-1 mic stand mounts and accessories you may need.\u003c\/p\u003e","brand":"Digital Audio Labs","offers":[{"title":"Default Title","offer_id":44451253452903,"sku":"483053","price":3499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/digital-audio-labs-livemix-pro-32_483053_1.jpg?v=1787096493"},{"product_id":"digital-audio-labs-livemix-pro-16-personal-mix-distributor","title":"Digital Audio Labs LiveMix Pro-16 Personal Mix Distributor","description":"\u003cp\u003eThe Dante network ready \u003cstrong\u003eDigital Audio Labs Livemix Pro-16\u003c\/strong\u003e is the mix and power distribution center of the Livemix Pro system. Each front panel Ethercon compatible port carries two separate mixes to connected personal mixers.\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e\u003chr\u003e  \u003ch3 id=\"toc_1\"\u003eLIVEMIX PRO SCALABLE PERSONAL MONITORING SYSTEM\u003c\/h3\u003e  \u003cp\u003eLivemix Pro is a scalable personal monitoring system with up to 64 channels of audio. It is designed to help teams make mixes easily, even with higher channel counts. Less than 64 channels? It can be configured to look like a smaller system. And with the revolutionary Group Mix View, making a personal mix with is simple, even with higher channel counts.\u003c\/p\u003e  \u003cp\u003eEvery Livemix Pro system needs a central mixer\/distributor, and at least one personal mixer. To design the system, just select the distributor unit based on how many total mixes you will need. Then determine how many personal mixers you need. The PRO-SOLO and PRO-SOLO MD personal mixers provides one personal mix per unit. The PRO-DUO dual mix personal mixer, provides two separate mixes, helping reduce additional costs and stage clutter. Lastly, select how many MT-1 mic stand mounts and accessories you may need.\u003c\/p\u003e","brand":"Digital Audio Labs","offers":[{"title":"Default Title","offer_id":44451253485671,"sku":"483052","price":2499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/digital-audio-labs-livemix-pro-16_483052_1.jpg?v=1787096493"},{"product_id":"digital-audio-labs-livemix-da-8-8-stereo-analog-output","title":"Digital Audio Labs LiveMix Pro DA-8 8 Stereo Analog Output","description":"\u003cp\u003eUse the \u003cstrong\u003eDigital Audio Labs LiveMix DA-8\u003c\/strong\u003e to connect your wireless in-ear monitor transmitters or other analog outputs to the Livemix Pro system. Dynamically route personal mixes to outputs from Livemix Pro personal mixers. Output ID with test tone eliminates the need to dig in the back of a rack to trace what output goes where!\u003c\/p\u003e    \u003cp\u003e\u003c\/p\u003e\u003chr\u003e  \u003ch3 id=\"toc_1\"\u003eLIVEMIX PRO SCALABLE PERSONAL MONITORING SYSTEM\u003c\/h3\u003e  \u003cp\u003eLivemix Pro is a scalable personal monitoring system with up to 64 channels of audio. It is designed to help teams make mixes easily, even with higher channel counts. Less than 64 channels? It can be configured to look like a smaller system. And with the revolutionary Group Mix View, making a personal mix with is simple, even with higher channel counts.\u003c\/p\u003e  \u003cp\u003eEvery Livemix Pro system needs a central mixer\/distributor, and at least one personal mixer. To design the system, just select the distributor unit based on how many total mixes you will need. Then determine how many personal mixers you need. The PRO-SOLO and PRO-SOLO MD personal mixers provides one personal mix per unit. The PRO-DUO dual mix personal mixer, provides two separate mixes, helping reduce additional costs and stage clutter. Lastly, select how many MT-1 mic stand mounts and accessories you may need.\u003c\/p\u003e","brand":"Digital Audio Labs","offers":[{"title":"Default Title","offer_id":44451253518439,"sku":"483054","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/digital-audio-labs-livemix-da-8_483054_1.jpg?v=1787096493"},{"product_id":"aviom-d800-v-2-a-net-distributor-with-dante","title":"Aviom D800-Dante v.2 A-Net Distributor with Dante","description":"\u003cp\u003eThe \u003cstrong\u003eAviom D800-Dante v.2\u003c\/strong\u003e A-Net distributor provides the link between the Dante network, input module, or console card and the Personal Mixers, providing DC power and the digital A-Net audio data stream to your Aviom Personal Mixers, utilizing standard Cat-5 cables. The A-Net and Dante versions of the D800 also integrate additional advanced options for delivering high-channel-count audio streams to your Personal Mixers, streamlining connections between A640 and A360 Personal Mixers and transmitters used for wireless in-ear monitors.\u003c\/p\u003e\r\n\r\n\u003cp\u003eD800-Dante v.2 eliminates the need for the bidirectional switches by automatically setting up bidirectional communication with Aviom Personal Mixers as needed. The original and v.2 versions of the product can be freely interchanged in systems designs.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_0\"\u003eSIMPLE SETUP, POWERFUL PERFORMANCE\u003c\/h3\u003e\r\n\r\n\u003cp\u003eOn the most basic level, the D800-Dante does an unglamorous but important job: get power and audio to your Personal Mixers. Setup is a breeze, with no IP addressing, routing, or switch managing to worry about, so you can get set up and start mixing in no time, without a lot of hassle.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_1\"\u003eGET MORE CHANNELS TO YOUR MIXERS\u003c\/h3\u003e\r\n\r\n\u003cp\u003eUsed in conjunction with the SB4 System Bridge and Pro16 A-Net console cards (such as the Y1 A-Net Card for Yamaha), the D800 and D800-Dante can combine up to four 16-channel A-Net streams for sending up to 64 channels directly from your digital console to your Aviom Personal Mixers. Mix channels can be individually selected for each A640 right from its user interface and for the A360 Personal Mixer by using A360 Channel Manager, allowing each musician to mix exactly the sources they need.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_2\"\u003eCONNECT DIRECTLY TO DANTE\u003c\/h3\u003e\r\n\r\n\u003cp\u003eIf your audio system includes a Dante audio network, the D800-Dante can interface directly to the network. Assign up to 64 channels from Dante to the D800-Dante for distribution to the Aviom Personal Mixers. Use the A640 Personal Mixer's Chanel Mapping feature to select a custom set of channels for each performer. Mix channels can be individually selected for each A360 using the A360 Channel Manager software. Rear-panel DIP switches on the D800 are used to set the global stereo links for channels going to the Personal Mixers. Use the Dante Controller Mac\/PC software application for channel routing.\u003c\/p\u003e\r\n\r\n\u003ch3 id=\"toc_3\"\u003eDANTE SAMPLE RATES UP TO 192 KHZ\u003c\/h3\u003e\r\n\r\n\u003cp\u003eWith the D800-Dante, you can run your Dante network at 44.1\/48 kHz, 88.2\/96 kHz, or 176.4\/192 kHz. At higher sample rates, the D800-Dante converts the audio data to 48 kHz for distribution to the Aviom Personal Mixers (and other A-Net devices). If you need more than eight Personal Mixers, both the D800 and the D800-Dante include an A-Net Out port on the rear panel—perfect for sending the incoming digital audio stream (regardless of its original source) on to additional A-Net Distributors. Learn more about expanding your system.\u003c\/p\u003e","brand":"Aviom","offers":[{"title":"Default Title","offer_id":44451322101863,"sku":"493378","price":3399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/aviom-d800-dante-v2_493378_1.jpg?v=1787096780"},{"product_id":"alto-professional-stealth-wireless-mkii-system-for-active-loudspeakers","title":"Alto Professional Stealth Wireless MKII System for Active Loudspeakers","description":"\u003cp\u003eThe \u003cstrong\u003eAlto Professional Stealth Wireless MKII\u003c\/strong\u003e is a next-gen wireless solution that eliminates the need for up to 200’ of cabling. With Stealth Wireless MKII, it’s easy to add wireless audio connectivity to any active loudspeaker without compromising audio quality. The system works through walls, floors, and ceilings, providing setup flexibility that far exceeds conventional hard-wired systems. Adding Stealth Wireless MKII to your live sound rig will enable you to skip the long setup and teardown processes required of a wired sound system. This is the ultimate time and money saver.\u003c\/p\u003e\r\n\r\n\u003cp\u003eStealth Wireless MKII includes a single dual-channel transmitter with two removeable antennas. The front panel LCD screen conveniently shows the RF frequency, channel number, and AF signal level for each channel. Each system also includes two receivers with slim-line, rugged plastic housings, and dual swiveling hinged antennae.\u003c\/p\u003e\r\n\r\n\u003cp\u003eStealth Wireless MKII can be set for mono or stereo use. Two XLR + balanced 1\/4\" TRS combo inputs on the transmitter accommodate the main outputs from nearly any mixing board or console. Each of the receiving units has a single 1\/4\" TRS output to send the signal to a powered speaker array or a traditional amplifier-and-speaker combo. Each Stealth Wireless MKII package comes with (2) 1\/4\" TRS to XLR cables so that you can plug into your system right out of the box.\u003c\/p\u003e\r\n\r\n\u003cp\u003eFor sound professionals, setup time, simplicity, and flexibility are of paramount importance. But any reduction in audio quality for the sake of convenience is totally unacceptable. Stealth Wireless MKII delivers exactly what professionals demand—faster setup\/teardown, LCD displays for instant visual confirmation of system configuration, and uncompromised audio quality.\u003c\/p\u003e","brand":"Alto","offers":[{"title":"Default Title","offer_id":44451337732199,"sku":"282556","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alto-stealth-wireless-mkii_282556_1.jpg?v=1787096847"},{"product_id":"alto-professional-stealth-wireless-mkii-system-for-active-loudspeakers-demo-deal","title":"Alto Professional Stealth Wireless MKII System for Active Loudspeakers (Demo Deal)","description":"\u003cp\u003eThe \u003cstrong\u003eAlto Professional Stealth Wireless MKII\u003c\/strong\u003e is a next-gen wireless solution that eliminates the need for up to 200’ of cabling. With Stealth Wireless MKII, it’s easy to add wireless audio connectivity to any active loudspeaker without compromising audio quality. The system works through walls, floors, and ceilings, providing setup flexibility that far exceeds conventional hard-wired systems. Adding Stealth Wireless MKII to your live sound rig will enable you to skip the long setup and teardown processes required of a wired sound system. This is the ultimate time and money saver.\u003c\/p\u003e\n\n\u003cp\u003eStealth Wireless MKII includes a single dual-channel transmitter with two removeable antennas. The front panel LCD screen conveniently shows the RF frequency, channel number, and AF signal level for each channel. Each system also includes two receivers with slim-line, rugged plastic housings, and dual swiveling hinged antennae.\u003c\/p\u003e\n\n\u003cp\u003eStealth Wireless MKII can be set for mono or stereo use. Two XLR + balanced 1\/4\" TRS combo inputs on the transmitter accommodate the main outputs from nearly any mixing board or console. Each of the receiving units has a single 1\/4\" TRS output to send the signal to a powered speaker array or a traditional amplifier-and-speaker combo. Each Stealth Wireless MKII package comes with (2) 1\/4\" TRS to XLR cables so that you can plug into your system right out of the box.\u003c\/p\u003e\n\n\u003cp\u003eFor sound professionals, setup time, simplicity, and flexibility are of paramount importance. But any reduction in audio quality for the sake of convenience is totally unacceptable. Stealth Wireless MKII delivers exactly what professionals demand—faster setup\/teardown, LCD displays for instant visual confirmation of system configuration, and uncompromised audio quality.\u003c\/p\u003e","brand":"Alto","offers":[{"title":"Default Title","offer_id":44451337797735,"sku":"495854","price":349.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/8848\/5479\/files\/alto-stealth-wireless-mkii_282556_1_dd4c4f27-563e-4fa2-971d-2ec751c7eaaf.jpg?v=1787096847"}],"url":"https:\/\/vintageking.com\/collections\/recording-monitoring-live-sound-monitoring-live-sound-monitor-management.oembed","provider":"Vintage King","version":"1.0","type":"link"}