Barefoot Sound MicroMain35 Gen1 Monitor Pair #487/488 (Used)

Following in the footsteps of the MicroMain27, the MicroMain35 brings revolutionary Barefoot three-way technology into an even more compact enclosure. Dual force canceling 7" subwoofers, a 5" midbass driver and 1" dome tweeter are fused seamlessly into a single source. In just a few years Barefoot Sound has built a reputation for groundbreaking technological innovation executed with uncompromising quality and performance. Barefoot monitors are known for delivering a combination of deep sonic clarity and effortless translation. The MM35 lives up to everything you would expect from a Barefoot.

Specifications

• 3-way active monitor with integral subs
• Controls Input level attenuator, Twt/Mid/Sub amplifier mutes, crossover voicing select
• Input Impedance 50k Ohm
• Frequency Response 35Hz - 30kHz (+/- 3 dB), 37Hz - 20kHz (+/- 1.5 dB)
• Bass Response -3dB @ 35Hz, Q = 0.707, Slope = 12 dB/octave
• Cabinet 19 liters total internal volume, Sealed sub enclosure, Sealed midbass enclosure, Machined aluminum front baffle plate
• Crossover Frequencies 100/2500 Hz
• Tweeter 1" soft dome, Rear waveguide chamber
• Power: 50 W
• Midbass 5" poly cone, Sealed rear waveguide enclosure Power: 100 W
• Dual Subwoofers 7" aluminum cones, 3/4" peak-to-peak linear excursion
• Power: 200 W
• AC Power Input Nominal 115 VAC or 230 VAC
• Power Consumption Idle 20W, Maximum: 375W
• Weight Speaker 42 lbs each (19 kg)
• Shipping: 55 lbs each (25 kg)
• Dimensions HxWxD 14.5 x 9.5 x 14.75 inches (368 x 241 x 375 mm)

*Note* The MM35 has a universal mains input, enabling it to operate at voltages between 100VAC and 240VAC with no switching required.

Please note: Stock photo used. Available items are sure to be in similar condition, but may not be the exact item pictured.