AnaMod ATS-1 #0195 (Used)

Functions:

Record
When the RECORD switch is depressed, the switch is illuminated and the ATS-1 tape simulation is activated.

Stop
When the STOP switch is depressed, the switch is illuminated and the ATS-1 is placed in hard bypass.

Input
The INPUT controls are continuously adjustable from minus 12dB to plus 18dB. Unity gain is at the center position.

Output
The Output controls are continuously adjustable from minus 12dB to plus 18dB. Unity gain is at the center position.

Machine Type
This rotary switch selects any one of four possible tape machine simulations, as determined by the SIMM cards installed in slots 1-4. This particular unit comes with all Machine Type cards.

Tape Formulation
This rotary switch selects any one of four possible tape simulations, as determined by the SIMM cards installed in slots A-D. This particular unit comes with Tape Formulation A, B and C.

Speed
This switch selects 7.5, 15 or 30 ips operation.

Bias
The BIAS control sets the effective bias level in the record circuit. The center position is the standard amount of overbias per tape formulation.

LF Record
The LF RECORD control adjusts the low frequency EQ in the record circuit. The center position is standard alignment.

HF Repro
The HF REPRO control adjusts the high frequency EQ in the playback circuit. The center position is standard alignment.

Ref. Level
The reference level of the VU meter can be adjusted from 0 dB (+4dBu) to +12 dB in 3dB increments.

Hiss
The hiss level can be set from off to way too much.