Product DescriptionDesigned specifically for static use on desk & floor stands, when a discrete profile is essential.
The lyre suspension webs of these InVision have a small profile designed to isolate in fixed situations for ‘compact’ microphone series and ‘remote capsule’ systems.
The InVision lyre webs are just 43mm wide by 40mm high, fit on a standard bar and can be angled by the self adjusting screw. Available with either 9.5mm clip (INV-1), 1 x 9.5mm and 1 x 20mm clip (INV-2) or 20mm clip (INV-3).
The INV-1 also includes a reducing sleeve that fixes onto remote capsule microphones such as the Schoeps CCM and DPA 4000 series.
The clips on the INV-1 and INV-2 hold the microphone by the connector so that a foam gag can be used if required.
• 1 x 20mm clip at the front and 1 x 9.5mm clip at the rear, with InVision (43mm wide) lyres
• Standard bar with 25mm (1”) centers
Suitable for following microphones:
Neumann KM 100 & KM-D series (remote)
Schoeps MK w/KC active cable, CMC w/KC active cable, CCM Ug
Sennheiser MKH 8000 series with MZL
Condition New Diameter 9.5 / 20 mm