EQ controls are:
- Selectable 10 - 12 - 16 kHz high-shelf
- High pass filter at four frequencies: 45 - 70 - 160 - 360 Hz
- Low EQ at four frequencies: 35 - 60 - 110 - 220 Hz
- Hi-mid EQ at six frequencies: 360 - 700 Hz - 1.6 - 3.2 - 4.8 - 7.2 kHz
- Low pass filter at four frequencies 8 - 10 - 14 - 18 kHz
- Separate mic and line inputs
- Mic input attenuation from -20 to -80 dB in 5 dB increments
- Line input attenuation from +10 to -20 dB in 5 dB increments
- Hi/Lo impedance switch on rear of unit.
- Phase reverse
- EQ bypass
Unit will be recapped, with all pots, switches and card connector edges cleaned and any faulty components repaired. per module. Our servicing is regarded as the best in the industry worldwide!
Stereo matching is available. VK Racks are expertly crafted, coming with 48v, output attenuation pots, XLR I/Os, internal and selectable 110v/220v PSU.
HistoryFormed in 1961 by Mr. Rupert Neve, the Neve Electronics company was focused from the beginning on designing and building the highest quality professional audio components. After moving to a new factory in Melbourn, England Neve created three of its most iconic products: the 2254 compressor limiter in 1968, the 1073 Mic pre/EQ in 1970, and the 1081 Mic pre/EQ in 1973.
Aimed at the broadcast market, these units were found in numerous custom-built Neve consoles of the day. And because so much of their work was customized, there are many variants on the basic 2254 compressor and 1073 limiter/pre, including different form factors, cosmetics and components.
Using Class A discrete, transistor designs, meticulously hand-wired and built to last, Neve became the world standard for excellence in broadcast and recording studio consoles. From the small-format BCM10 and Melbourn mixers, to the large-format 80xx Series, these consoles continue to be treasured today, while standalone modules from them can be found in the racks of the best studios all over the world.
To this day, the most important Neve products from the late 60s and early 70s are still manufactured according to the original specs. The reason is obvious -