The Jackson Ampworks 1×12 - Open Back is a perfect speaker cabinet to complement our entire line of amps and is ideal when you want a tone that is more “airy” and fills out the musical space!
Designed while the American Series amps were being developed, the Open Back 1×12 Cabinet gives you the sense that your tone is coming from every direction and surrounding you as the open back design allows the tone to emanate from both the front and back of the cabinet!
OPEN BACK - OPEN TONE
As guitarists themselves, Jackson Ampworks works very hard to achieve great tone and, certainly, one of the most important aspects of that tone is the speaker cabinet they use. After all, the speaker cabinet is the final link between your amplifier and your ears, therefore, its effect on your tone cannot be understated.
It is with this in mind that they developed their new line of Open Back Speaker Cabinets. They've made several improvements to the way open back speaker cabinets have been built in the past and the results are staggering!
When designing the 1×12 Open Back Cabinets, Jackson Ampworks paid very close attention to the size of the cabinet as well as the ratio of the height, width and depth. All of these factors work together to shape the final tone and resonant frequency produced by the cabinet and they’ve designed a cabinet that actually has the low end of their Dual Ported cabinets while retaining the signature highs and airiness of an open back cabinet.
One of the critical components of any speaker cabinet, and certainly so with the an open back speaker cabinet design, is the baffle that the speaker physically mounts to. This piece of the cabinet is not only what the speaker mounts to but also how the vibrations from the speakers are transferred into the rest of the speaker cabinet. Too thick of a speaker baffle and the cabinet can sound stiff and restricted; too think of a speaker baffle and the low-end will suffer. Again, they experimented with this a great deal to arrive at a material thickness that translates all of the low end content they were looking to convey and still breathes in a natural way.
The most famous open back cabinets ever made were made not to reproduce a certain tone, but were instead designed for economy and speed of manufacture. While it is very inexpensive to manufacture these cabinets, the side effect of cutting corners is a dramatic loss of low-end content. So much so that the maker of these cabinets would have to increase low-end focus on the amplifiers in order to compensate for the lack of low-end response in their cabinets. Try This - take an American Styled amp from the 60’s, disconnect the speaker lead from the combo and plug it into a well made speaker cabinet – either open back or closed back. There’s a good chance you’ll find that you have WAY too much bass in your tone and will have to turn the Bass control either way down or almost completely off. This is because the standard speaker baffle design that has been used for years is extremely ineffective.
There is a more costly downside to this oversight other than just having to adjust the Bass control on the amp. It takes power to reproduce low end. That is why you’ll seldom see a bass amp less than 60W any many times you’ll see solid state amps producing 1000W or more. The reason is that it takes a lot of power to reproduce low end cleanly. When your cabinet design is inefficient, you have to generate more low end in the amplifier which means that for a given volume your tone will be more overdriven that you may like. In short, it means you have to make compromises in the amplifier design to maintain low end, and the more low end you push from the amp, the more headroom you lose. Conversely it means that if you design the cabinet correctly, and it will accurately deliver the low end that is sent to it, you can remove some low end from the amplifier circuit and the amp will remain cleaner longer than it normally would with a poor speaker baffle design.
So how did Jackson Ampworks mount their speaker baffle? In order to mount the speaker baffle into the cabinet so that it would be mechanically secure (no rattles or buzzing!) and acoustically efficient, they chose to dado the entire speaker baffle along all four sides of the cabinet. As the cabinet is being assembled, three of the four sides of the cabinet are assembled using their dovetail joints and once they are together, the dado is filled with glue and the speaker baffle is installed. Once the speaker baffle is mounted into the cabinet, the 4th side of the cabinet is installed thus trapping the speaker baffle into position and supporting it on all four sides. Once the cabinet is dried, the speaker baffle is now part of the cabinet as a whole and cannot be removed. This construction method is more time consuming and costly than traditional methods, but the results speak for themselves.
Final tuning of the cabinet was done using the port located on the back panel of the cabinet. Again every little thing matters including the size of an opening on the back of a speaker cabinet. They found that the location of the speaker on the speaker baffle made a huge difference in tone. Dead center was not the sweet spot in this cabinet design and several test baffles were made with the speaker mounted in various locations until the best sounding location was found.
Very seldom are well designed products as simple as they appear. In fact that is one of the hallmarks of a well designed product. It looks simple. There is usually a lot of experimenting and study involved until the desired result is achieved and our speaker cabinets are no different. Every little thing matters and everything Jackson Ampworks does has a specific reason. They can’t imagine doing it any other way.
- 13-ply Baltic Birch Plywood
- Dovetail Corner Joints Rattle Free Performance
- Recessed Steel Handles For Easy Stacking and Transport
- Genuine Switchcraft Jacks and 12AWG Speaker Hookup Wire
- Dimensions: 22" x 17" x 11.5" (WxHxD)
- Weight: 30 lbs