Gefell MV 200 - Matte Black

Be the first to review this product


Quick Overview

Solo preamplifier for SMS 2000 - matte black
Gefell MV 200 - Matte Black


The Gefell MV 200 is preamplifier body from the SMS 2000 modular small diaphragm condenser microphone.

The condenser miniature microphone system SMS 2000 consists of microphone preamplifier and exchangeable capsules with the polar patterns cardioid, hyper cardioid and omnidirectional. Accordingly, the microphones M 200, M 210 and M 270 are available. This allows universal application in professional recording and sound reinforcement.

The newly developed, transformerless circuit design substitutes the previous transformer for a symmetrical output stage. The preamplifier is distinguished by its remarkably low intrinsic noise and output capabilities.

The module system adjusted to optimum reproduction properties allows a particularly clean and colorless sound reproduction.

The direction of maximum sensitivity is axial. The studio microphone module system is equipped with a comprehensive range of accessories for widely varying methods of microphone mounting.

It is possible to activate a 10 dB-preattenuation for handling very high sound pressure levels. A sensitivity reduction for low frequencies can be utilized to suppress the proximity effect. The two switches are sunk into the middle of the microphone.

The microphone are equipped with a standard 3-pin XLR connector fitting to a microphone cable, e.g. C 70. The operation voltage is provided by 48V phantom powering according to the international standards DIN 45 596 and IEC 268-15. The studio microphone system is available in a satin nickel and black matt finish.

Additional Information

Condition New
Package Contents No
Length No
Diameter No
Unit Weight No
Transducer Type Condenser
Polar Pattern N/A
Number of Microphones Single Microphone
Phantom Required No
Impedance 150 Ohms
Frequency Range No
input_pad -10 dB
Filters -15 dB @ 60 hz
Sensitivity No
Max. SPL No
Analog or Digital Analog

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.